Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 133 of 278 04.08.2003
SIM locks: These are factory set locks, such as "PF", "PN", "PU", "PP", "PC". An 8-digit unlocking
code is required to operate the mobile with a different SIM card, or to lift the lock. The
code can only be obtained from the provider.
Failure to enter the password is subject to the same timing algorithm as the Master
Phone Code (see Table 15).
Call barring: Supported modes are "AO", "OI", "OX", "AI", "IR", "AB", "AG", "AC". If the call barring
password is entered incorrectly three times, the client will need to contact the service
provider to obtain a new one.
Summary of related chapters: For further instructions and examples see Chapters 4.21 (AT+CLCK
Facility lock), Chapter 4.21.1 (examples), 7.15 (AT^SLCK Facility
lock, 4.38 (AT+CPWD Change password) and 7.42 (AT^SPWD
Change password for a lock, 4.35 (AT+CPIN Enter PIN), 4.36
(AT+CPIN2 Enter PIN2)
A complete list of *# codes is provided in Chapter 8.4.
Related +CME errors are listed in Chapter 8.1.1.
To check the number of remaining attempts to enter the correct pass-
word use the AT^SPIC command. See Chapter 7.38.