Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 130 of 278 04.08.2003
PH-FSIM PUK ME is waiting for phone-to-very-first-SIM card
unblocking password to be given. Necessary
when "PF" lock is active and other than first SIM
card is inserted.
PH-NET PIN ME is waiting for network personalisation pass-
word
PH-NET PUK ME is waiting for network personalisation un-
blocking password
PH-NS PIN ME is waiting for network subset personalisation
password
PH-NS PUK ME is waiting for network subset unblocking
password
PH-SP PIN ME is waiting for service provider personalisa-
tion password
PH-SP PUK ME is waiting for service provider personalisa-
tion unblocking password
PH-C PIN ME is waiting for corporate personalisation
password
PH-C PUK ME is waiting for corprorate personalisation un-
blocking password
See Chapters 4.21 and 7.15 for information on lock types.
Write command
AT+CPIN=<pin>
[,<new pin>]
Response
The write command lets the ME store the entered password. This may be for
example the SIM PIN1 to register to the GSM network, or the SIM PUK1 to re-
place a disabled PIN with a new one, or the PH-SIM PIN if the client has taken
precautions for preventing damage in the event of loss or theft etc. See above
for the list of passwords.
OK
If error is related to ME functionality:
+CME ERROR: <err>
If no PIN request is pending (for example if PIN authentication has been done
and the same PIN is entered again) ME responds +CME ERROR: operation not
allowed. No action is required from your part.
Parameter
<pin> password (string type), for example SIM PIN or, if requested, one
of the unblocking keys, such as SIM-PUK or PH-SIM PUK.
<new pin> If the ME is waiting for an unblocking key, use <pin> to enter the
unblocking key, followed by <newpin> to specify the password.
See Chapter 4.35.1 for more information about when you may
need to enter an unblocking key.
Reference
GSM 07.07
Note
· Caution: After entering a password with AT+CPIN all other commands that
need access to data on the SIM card may be blocked for up to 20 seconds.
The response in these cases will be “+CME Error: 14” (SIM busy).
· Successful PIN authentication only confirms that the entered PIN was rec-
ognized and correct. The output of the result code OK does not necessarily
im
p
l
y
that the mobile is re
g
istered to the desired network.