Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 129 of 278 04.08.2003
4.35 AT+CPIN Enter PIN
Test command
AT+CPIN=?
Response
OK
Read command
AT+CPIN?
Response
TA returns an alphanumeric string indicating whether or not a password is re-
quired.
+CPIN: <code> OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<code>
SIM PIN authentication
READY PIN has already been entered. No further entry
needed.
SIM PIN ME is waiting for SIM PIN1.
SIM PUK ME is waiting for SIM PUK1 if PIN1 was dis-
abled after three failed attempts to enter PIN1.
SIM PIN2 ME is waiting for PIN2, when the attempt to ac-
cess PIN2 requiring features was acknowledged
with +CME ERROR:17 (e.g. if client attempts to
edit the FD phone book). This is only applicable
if the AT+CPIN read command also prompts for
SIM PIN2. Normally, the AT+CPIN2 command is
intended for SIM PIN2.
SIM PUK2 ME is waiting for PUK2 to unblock a disabled
PIN2. Necessary if preceding command was
acknowledged with error +CME ERROR:18 and
only if the AT+CPIN read command also
prompts for SIM PUK2. Normally, the AT+CPIN2
command is intended for SIM PUK2.
Phone security locks:
PH-SIM PIN ME is waiting for phone-to-SIM card password if
"PS" lock is active and user inserts other SIM
card than the one used for the lock. ("PS" lock is
also referred to as phone or antitheft lock).
PH-SIM PUK ME is waiting for Master Phone Code, if the
above "PS" lock password was incorrectly en-
tered three times.
Factory set SIM locks
PH-FSIM PIN ME is waiting for phone-to-very-first-SIM card.
Necessary when "PF" lock was set. When pow-
ered up the first time, ME locks itself to the first
SIM card put into the card holder. As a result,
operation of the mobile is restricted to this one
SIM card (unless the PH-FSIM PUK is used as
described below).