Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 125 of 278 04.08.2003
cluded in the FD phone book.
To edit the FD phone book PIN 2 is required. See Chapters
AT+CPIN2 Enter PIN2 and AT+CLCK Facility lock,
AT^SLCK Facility lock.
“LD” Last dialing phone book. Stores all voice call numbers dialed
with ATD, but no data call numbers. Storage positions 1-10
located on SIM card only or both on SIM card and ME.
The share of each storage is determined by the SIM card: If
the locations available on the SIM card are full, the memory
of the ME can be filled until a total of 10 locations is
reached.
AT+CPBW is not be applicable to this storage. The LD list
can be deleted with AT^SPBD (see Chapter 7.35) and
AT^SDLD (see Chapter 7.12).
“MC” List of missed (unanswered received) calls. Storage posi-
tions 1-10 based in ME.
AT+CPBW not applicable to this storage. The MC list can be
deleted with AT^SPBD.
“RC” List of received calls. Storage positions 1-10 based in ME.
AT+CPBW not applicable to this storage. The RC list can be
deleted with AT^SPBD.
“ON” Own numbers (MSISDNs). Capacity and handling is de-
pendent on SIM card.
Can be edited with AT+CPBW.
<used> (numeric)
Value indicating the number of used locations in selected memory
<total> (numeric)
Value indicating the maximum number of locations allowed in the
selected memory
Reference
GSM 07.07
Note
This command can be used only after the phone book data from the SIM have
been read successfully for the first time. Reading starts after successful SIM
authentication has been performed, and may take up to 30 seconds depending
on the SIM used. While the read process is in progress, an attempt to use any
of the phone book commands will result in “+CME Error: 14” (SIM busy).