Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 108 of 278 04.08.2003
4.23 AT+CLIR Calling line identification restriction
This command refers to the GSM supplementary service CLIR (Calling Line Identification Restric-
tion).
Test command
AT+CLIR=?
Response
+CLIR: (list of supported <n>s)
OK
Defined values
<n> 0 Presentation indicator is used according to the
subscription of the CLIR service
1 CLIR invocation (incognito)
2 CLIR suppression (not incognito)
Read command
AT+CLIR?
Response
+CLIR: <n>,<m>
Defined values
<n> See test command
<m> Parameter shows the subscriber CLIR service status in
the network:
0 CLIR not provisioned
1 CLIR provisioned in permanent mode
2 Unknown (e.g. no network, etc.)
3 CLIR temporary mode presentation restricted
4 CLIR temporary mode presentation allowed
Write command
AT+CLIR=[<n>]
Response
OK/ERROR/+CME ERROR
Parameter: See test command
Reference
GSM 07.07
Note