Specifications
TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 10 of 278 04.08.2003
Chapter AT command
What is new
2.37 AT&V Updated list of responses returned by AT&V
2.38 AT&W Updated list parameters storable to user profile.
2.44 AT+ICF Modified description of parameters. Added notes.
2.45 AT+IFC Modified parameter names. Revised description of commands and
parameters. Corrected syntax.
4.19 AT+CIND Renamed parameters to <indDescr> and <indValue>.
4.21 AT+CLCK Added note regarding different result codes for voice and fax/data
calls in case of call release
4.25 AT+CME Added chapter reference pointing to error code tables.
4.26 AT+CMER Deleted list of <descr> and <value>, as the full description is con-
tained in Chapter 4.19. Renamed parameters to <indDescr> and
<indValue> of AT+CIND.
4.28 AT+CMUX Multiplex mode requires 8 bits, no parity and 1 stop bit
4.30 AT+COPS Modified description of defaults of parameter <mode>.
4.32 AT+CPBR More detailed description of parameters.
4.34 AT+CPBW More detailed description of parameters.
4.39 AT+CR Write command requires PIN. AT&W, AT&F apply.
4.40 AT+CRC AT&W, AT&F apply.
4.45 AT+CSNS Dependency on PIN authentication explained.
5.4 AT+ CMGL New Error code: SIM busy
5.5 AT+CMGR New Error code: SIM busy
7.2 AT^MONI Deleted note regarding RING line activation.
7.3 AT^MONP Deleted note regarding RING line activation.
7.5 AT^SAIC Added instructions of how to use audio modes 2, 3 and 6 with
TC35i Terminal
7.6 AT^SBC Command does not apply to TC35i Terminal.
Modified description of overvoltage URCs.
7.18 AT^SMGL New Error code: SIM busy
7.19 AT^SMGR New Error code: SIM busy
7.22 AT^SMOND More detailed description of parameters.
Deleted note regarding RING line activation.
7.23 AT^SMSO Power-off procedure described in greater detail.
7.31 AT^SNFS Added instructions and example of how to use audio modes 2, 3
and 6 with TC35i Terminal
7.34 AT^SPBC More detailed description of parameters. Renamed parameter
<schar>.
7.36 AT^SPBG More detailed description of parameters.
7.37 AT^SPBS More detailed description of parameters.
7.44 AT^SSCONF Syntax of Write command corrected: <FF> is optional.
7.46 AT^SSET More detailed description of URC “^SSIM READY”
7.51 AT%D Modified and added error codes.
7.48 AT^SSYNC Extra notes regarding TC35i Terminal.
8.6 --- New chapter: “Sort order for phone books”
--- AT+CMMS Chapter removed