Operating Instructions

How to Use This Manual
9 |
93
Siemens Industry, Inc.
Owner's Manual
588-682
Building Technologies
2019-01-25
How to Use This Manual
About This Manual
This manual is written for the owner and user of the TC Compact Series. It is designed
to help you become familiar with the TC Compact and its applications.
This section covers manual organization, document conventions and symbols used in
the manual, how to access help, related publications, and any other information that
will help you use this manual.
Document Organization
This manual contains the following chapters:
●
Chapter 1—Introduction , describes each section in this manual and presents an
overview of TC Compact operation.
●
Chapter 2—Hardware Features , describes the TC Compact hardware components
and their functions.
●
Chapter 3—Applications , describes the operating system and applications
available with the TC Compact.
●
Chapter 4—Troubleshooting , describes basic corrective measures you should take
if you encounter a problem when using a TC Compact.
NOTE:
The troubleshooting section is not meant to be a full diagnostic guide, but is designed
to help you address basic troubleshooting issues. If you encounter a problem not
covered in this section or require further assistance, consult your Siemens Solution
Partner, Authorized TALON Dealer.
● A Glossary describes the terms and acronyms used in this manual.
● An
Index is provided to assist you in finding information presented in this manual.
Prerequisites
In addition to reading this owner's manual, you should also become familiar with the
following technical documentation. Each document has been written to help you get
the most out of your TC Compact Series hardware.
These manuals, along with information about other Siemens Industry products,
technical training classes, and services can be obtained from your local Siemens
Solution Partner, Authorized TALON Dealer.
●
Powers Process Control Language (PPCL) User's Manual (588-583). This manual
describes Powers Process Control Language (PPCL), the language used to write
the control programs for the TC Compact.
● TALON Firmware User's Manual (588-580). These manuals describe the operator
interface program used to communicate with TALON field panels. It contains
information on defining the TC Compact database, including slopes and intercepts.
For Smoke Control Applications
Smoke Control Systems Application and Engineering Manual (125-1806). This manual
is a comprehensive reference on smoke control applications for TALON equipment. It
contains all of the various agency requirements and recommended practices of
organizations that are widely-recognized in composing standards and testing
equipment involved in life safety applications.