Operating Instructions
Table Of Contents
- How to Use This Manual
- Chapter 1—Introduction
- Chapter 2—Hardware Features
- 16- and 24-Point Compact Series Diagram
- 36-Point Compact Series Product Diagram
- Supported Point Types
- Compact Series Backup Batteries
- Using Auto Restore and Database Backup to Flash
- Memory
- Communication Connections
- Compact Series Smoke Control Application Requirements
- HOA (Hand-Off-Auto) Upgrade Kits
- PXM10S/T Product Overview and Description
- Unitary Equipment Controller
- TX-I/O Product Range Overview
- PX Series Enclosures and Service Boxes
- Chapter 3—Applications
- Chapter 4—Troubleshooting
- Glossary
- Index
Chapter 2—Hardware Features
HOA (Hand-Off-Auto) Upgrade Kits
0
59 |
93
Siemens Industry, Inc.
Owner's Manual
588-682
Building Technologies
2019-01-25
Menu/Submenu
Step
Description
Main
Rotate
DIAL
to highlight
Settings
.
Press
DIAL
/
OK
to select. Displays the Settings menu.
Settings
Press
DIAL
/
OK
to highlight and
select
Color
.
Displays the Color submenu.
Color
Rotate
DIAL
to highlights and
select
Adjust Color
.
Rotate
DIAL
to toggle between
Blue and White color.
Displays the backlight color you choose.
Press
DIAL
/
OK
to select. Applies the value and returns you to the previous menu.
Press
ESC
.
Returns you to the Settings menu without applying the new
color.
Figure 29: Color Submenu
Timeout
The PXM10S and PXM10T modules automatically turn off the backlight on the Display
screen after a predetermined amount of inactivity. However, when you press any key,
the backlight turns on again. If Point Monitor was active on the screen during this time,
the point list is saved, even if you are logged off.
Do the following to modify the Timeout feature.
Figure 30: Adjust Timeout Submenu
Menu/Submenu
Step
Description
Main
Rotate
DIAL
to highlight
Settings
.
Press
DIAL
/
OK
to select. Settings menu displays.
Settings
Press
DIAL
/
OK
to highlight and
select
Timeout
.
Displays the Timeout submenu.