Operating Instructions

Chapter 2—Hardware Features
HOA (Hand-Off-Auto) Upgrade Kits
0
54
| 93
Siemens Industry, Inc.
Owner's Manual
588-682
Building Technologies
2019-01-25
Menu/Submenu
Step
Description
P2 Point Action:
Rotate
DIAL
to highlight
Release Priority
.
Press
DIAL
/
OK
to select
Release Priority
.
Rotate DIAL to select Yes or
No. Press DIAL/OK.
This releases the priority to NONE.
Press
ESC
.
Returns you to the previous menu without changing the
point priority.
Figure 18: Release Priority Value Submenu
Configuring Point Monitor
NOTE:
This application and its sub-features are only available with the PXM10S module.
The Point Monitor allows you to select the points you frequently need to monitor and
allows quick access to view a point status. This concept is similar to a Favorites list.
The maximum number of points listed and stored in Point Monitor is 10. You cannot
add more points to the Point Monitor once you reach the maximum number.
Reset/clear the Point Monitor of stored points and then add the desired set of 10 or
fewer points you want to monitor.
NOTE:
Depending on user access rights, previously added points (by other users) to the
Point Monitor may not be visible. In this situation you can’t see or add any points in
Point Monitor. If this happens, you must first reset the Point Monitor to purge the old
information. This affects all users. While Point Monitor information can’t be retrieved,
the field panel database is not affected.
Configuring Points for Point Monitor
Do the following to configure the host field panel’s points for monitoring in Point
Monitor after logging in.
Figure 19: Point Monitor