Operating Instructions
Table Of Contents
- How to Use This Manual
- Chapter 1—Introduction
- Chapter 2—Hardware Features
- 16- and 24-Point Compact Series Diagram
- 36-Point Compact Series Product Diagram
- Supported Point Types
- Compact Series Backup Batteries
- Using Auto Restore and Database Backup to Flash
- Memory
- Communication Connections
- Compact Series Smoke Control Application Requirements
- HOA (Hand-Off-Auto) Upgrade Kits
- PXM10S/T Product Overview and Description
- Unitary Equipment Controller
- TX-I/O Product Range Overview
- PX Series Enclosures and Service Boxes
- Chapter 3—Applications
- Chapter 4—Troubleshooting
- Glossary
- Index
Chapter 2—Hardware Features
36-Point Compact Series Product Diagram
0
24
| 93
Siemens Industry, Inc.
Owner's Manual
588-682
Building Technologies
2019-01-25
TC-16 and TC-24 Status LEDs.
Status LED
Label
Indicates
OFF or ON solid - No device, no connection, or bad connection.
RS-485 RX
RS-485 RX
(yellow)
Flashing - Receiving information over the RS-485 BACnet MS/TP ALN
or MS/TP FLN (depending on how the port is defined).
OFF or ON solid - No device, no connection, or bad connection.
TC-16: DO 14 through DO 16; TC-24: DO
20 through DO 24
DO
XX
ON – Relay Energized.
36-Point Compact Series Product Diagram
TC-36 Features, Symbols, and Status LEDs.
Terminal Block Connection
Label
Indicates
1
24V
~
Supply voltage, 24 Vac input.
2
System neutral.
3
Functional earth.
4 through 27
Digital Output relay.