Operating Instructions
Table Of Contents
- How to Use This Manual
- Chapter 1—Introduction
- Chapter 2—Hardware Features
- 16- and 24-Point Compact Series Diagram
- 36-Point Compact Series Product Diagram
- Supported Point Types
- Compact Series Backup Batteries
- Using Auto Restore and Database Backup to Flash
- Memory
- Communication Connections
- Compact Series Smoke Control Application Requirements
- HOA (Hand-Off-Auto) Upgrade Kits
- PXM10S/T Product Overview and Description
- Unitary Equipment Controller
- TX-I/O Product Range Overview
- PX Series Enclosures and Service Boxes
- Chapter 3—Applications
- Chapter 4—Troubleshooting
- Glossary
- Index
Chapter 2—Hardware Features
HOA (Hand-Off-Auto) Upgrade Kits
0
55 |
93
Siemens Industry, Inc.
Owner's Manual
588-682
Building Technologies
2019-01-25
Menu/Submenu
Step
Description
Main
Rotate
DIAL
to highlight
Point
Monitor
.
Press
DIAL
/
OK
to select
Point
Monitor
.
Displays the Point Monitor menu.
Point Monitor
Rotate
DIAL
to highlight
Configure
.
Displays all available points at the field panel.
Press
DIAL
/
OK
to select
Configure
.
Edit Pt Monitor
Rotate
DIAL
to highlight
desired point.
Displays black background, allowing you to edit field.
Press
DIAL
/
OK
to select point.
Press
DIAL
/
OK
to select
Y
or
N
.
Y=Yes; point is monitored.
N=No; point is not monitored. (This is the default setting.)
Press
DIAL
/
OK
to select
Y
or
N
.
Press
ESC
. Returns you to the Monitor menu.
Figure 20: Configure Submenu
Figure 21: Edit Point Monitor Submenu
Do the following to configure bundled points in Point Monitor.
Menu/Submenu
Step
Description
Main
Rotate
DIAL
to highlight
Point
Monitor
.
Press
DIAL
/
OK
to select
Point
Monitor
.
Displays the Point Monitor menu.
Point Monitor
Rotate
DIAL
/
OK
to highlight
Configure
.
Displays all available points at the field panel.
Press
DIAL
/
OK
to select
Configure
.