Operating Instructions

Chapter 2—Hardware Features
HOA (Hand-Off-Auto) Upgrade Kits
0
41 |
93
Siemens Industry, Inc.
Owner's Manual
588-682
Building Technologies
2019-01-25
NOTE:
You must have sufficient operator access permissions to the Alarms, Points, and
Point Monitor applications to fully use all features and corresponding submenus.
Operator Display Layout
Display screen – Displays splash screen with either PXM10S or PXM10T module,
device Firmware Revision, field panel Firmware Revision number, and Cimetrics
BACstac revision number. Cursor position is indicated by either a right-angled bracket
(>) or inverted text color, depending on field panel type and revision.
Figure 4: Splash Screen
NOTE:
If text information is too long for the display screen, the text scrolls horizontally across
the screen, in a marquee style. If a high-priority task (such as a back-up) is being
performed, the horizontal scrolling may be erratic.
NOTE:
The list of objects (once it is created) that displays for the Alarms, Points, and Point
Monitor menus is static, however, the point information (current value, status, priority,
etc.) is dynamic. You must leave the menu/page and return to it in order to view any
updated information.
Navigation Push DIAL – Rotate clockwise or counter clockwise to highlight menu
options (up or down). Press the dial to enter a menu or to make a selection. Rotate the
dial to change a value. Pressing the dial is equivalent to selecting
OK.