Operating Instructions
Table Of Contents
- Cyber security disclaimer
- How to Use This Manual
- Chapter 1—Introduction
- Chapter 2—Hardware Features
- TC Modular Product Diagram
- Expansion Module Product Diagram
- Modular Series Backup Batteries
- Memory
- Communication Connections
- Modular Series Specifications
- Modular Series Smoke Control Application Requirements
- PXM10S/T Product Overview and Description
- TX-I/O Product Range Overview
- PX Series Enclosures and Service Boxes
- Chapter 3—Applications
- Chapter 4—Troubleshooting
- Glossary
- Index
How to Use This Manual
8
| 79
Siemens Industry, Inc.
Owner's Manual
588-781
Building Technologies
2018-10-01
When Using TALON View Software
TALON View
3.x Documentation.
To view TALON View
3.
x
documentation, see the
TALON View
Online Documentation window, which you can access from the TALON
View
Main Menu or the TALON View
program group.
Document Conventions
The following table lists conventions to help you use this manual in a quick and
efficient manner.
Convention
Examples
Numbered Lists (1, 2, 3…) indicate a
procedure with sequential steps.
1. Turn OFF power to the field panel.
2. Turn ON power to the field panel.
3. Contact the local Siemens Solution Partner, Authorized
TALON Dealer.
Conditions that must be completed or met
before beginning a task are designated with a
⊳
.
Intermediate results (what will happen
following the execution of a step), are
designated with a
⇨.
Results, which inform the user that a task was
completed successfully, are designated with a
⇨.
⊳Composer software is properly installed.
⊳A Valid license is available.
1. Select
Start
>
Programs
>
Siemens
>
GMS
>
Composer
.
⇨
The Project Management window displays.
2. Open an existing project or create a new one.
⇨
The project window displays.
Actions that should be performed are specified
in boldface font.
Type
F
for Field panels.
Click
OK
to save changes and close the dialog box.
Error and system messages are displayed in
Courier New font.
The message Report Definition successfully
renamed
displays in the status bar.
New terms appearing for the first time are
italicized.
The field panel continuously executes a user-defined set
of instructions called the
control program
.
This symbol signifies Notes. Notes provide additional
information or helpful hints.
Cross references to other information are
indicated with an arrow and the page number,
enclosed in brackets: [→92]
For more information on creating flowcharts, see
Flowcharts [→92].
Placeholders indicate text that can vary based
on your selection. Placeholders are specified
in bold print, and enclosed with brackets [ ].
Type
A C D H [username] [field panel #].