Operating Instructions
Table Of Contents
- Cyber security disclaimer
- How to Use This Manual
- Chapter 1—Introduction
- Chapter 2—Hardware Features
- TC Modular Product Diagram
- Expansion Module Product Diagram
- Modular Series Backup Batteries
- Memory
- Communication Connections
- Modular Series Specifications
- Modular Series Smoke Control Application Requirements
- PXM10S/T Product Overview and Description
- TX-I/O Product Range Overview
- PX Series Enclosures and Service Boxes
- Chapter 3—Applications
- Chapter 4—Troubleshooting
- Glossary
- Index
Chapter 2—Hardware Features
Communication Connections
0
49 |
79
Siemens Industry, Inc.
Owner's Manual
588-781
Building Technologies
2018-10-01
Figure 31: Color Submenu
Timeout
The PXM10S and PXM10T modules automatically turn off the backlight on the Display
screen after a predetermined amount of inactivity. However, when you press any key,
the backlight turns on again. If Point Monitor was active on the screen during this time,
the point list is saved, even if you are logged off.
Do the following to modify the Timeout feature.
Figure 32: Adjust Timeout Submenu
Menu/Submenu
Step
Description
Main
Rotate
DIAL
to highlight
Settings
.
Press
DIAL
/
OK
to select. Settings menu displays.
Settings
Press
DIAL
/
OK
to highlight and
select
Timeout
.
Displays the Timeout submenu.
Timeout
Rotate
DIAL
to highlight and
select
Adjust Timeout
.
Rotate
DIAL
to select a value. Valid Timeout values are 0 through 240 seconds.
Press
DIAL
/
OK
to select. Applies the value and returns you to the previous menu.
Press
ESC
.
Returns you to the Settings menu without applying the new
value.
Figure 33: Timeout Submenu