Operating Instructions
Table Of Contents
- Cyber security disclaimer
- How to Use This Manual
- Chapter 1—Introduction
- Chapter 2—Hardware Features
- TC Modular Product Diagram
- Expansion Module Product Diagram
- Modular Series Backup Batteries
- Memory
- Communication Connections
- Modular Series Specifications
- Modular Series Smoke Control Application Requirements
- PXM10S/T Product Overview and Description
- TX-I/O Product Range Overview
- PX Series Enclosures and Service Boxes
- Chapter 3—Applications
- Chapter 4—Troubleshooting
- Glossary
- Index
Chapter 2—Hardware Features
Communication Connections
0
48
| 79
Siemens Industry, Inc.
Owner's Manual
588-781
Building Technologies
2018-10-01
Menu/Submenu
Step
Description
Press
DIAL
/
OK
to select
Adjust
Brightness
.
Rotate
DIAL
to select a value. Valid brightness values are 0 through 100.
Press
DIAL
/
OK
to make
selection.
Applies the value and returns you to the previous menu.
Press
ESC
.
Returns you to the Settings menu without applying the new
value.
Figure 29: Brightness Submenu
Color
NOTE:
The Color feature is available only for the PXM10S module.
Do the following to modify the Color feature.
Figure 30: Adjust Color Submenu
Menu/Submenu
Step
Description
Main
Rotate
DIAL
to highlight
Settings
.
Press
DIAL
/
OK
to select. Displays the Settings menu.
Settings
Press
DIAL
/
OK
to highlight and
select
Color
.
Displays the Color submenu.
Color
Rotate
DIAL
to highlights and
select
Adjust Color
.
Rotate
DIAL
to toggle between
Blue and White color.
Displays the backlight color you choose.
Press
DIAL
/
OK
to select. Applies the value and returns you to the previous menu.
Press
ESC
.
Returns you to the Settings menu without applying the new
color.