Operating Instructions
Table Of Contents
- Cyber security disclaimer
- How to Use This Manual
- Chapter 1—Introduction
- Chapter 2—Hardware Features
- TC Modular Product Diagram
- Expansion Module Product Diagram
- Modular Series Backup Batteries
- Memory
- Communication Connections
- Modular Series Specifications
- Modular Series Smoke Control Application Requirements
- PXM10S/T Product Overview and Description
- TX-I/O Product Range Overview
- PX Series Enclosures and Service Boxes
- Chapter 3—Applications
- Chapter 4—Troubleshooting
- Glossary
- Index
Chapter 2—Hardware Features
Communication Connections
0
46
| 79
Siemens Industry, Inc.
Owner's Manual
588-781
Building Technologies
2018-10-01
Menu/Submenu
Step
Description
Main
Rotate
DIAL
to highlight
Point
Monitor
.
Press
DIAL
/
OK
to select
Point
Monitor
.
Displays the Point Monitor menu.
Point Monitor Rotate
DIAL
to highlight
Reset
.
Press
DIAL
/
OK
to select
Reset
.
Displays the Remove Monitor submenu.
Remove Monitor Rotate
DIAL
to highlight point.
Press
DIAL
/
OK
to make select
point.
Remove Monitor
Are you sure?
Rotate
DIAL
to highlight
Yes
or
No
.
Confirms you want to remove a point(s) from being
monitored.
Press
DIAL
/
OK
to make
selection.
Press
ESC
. Returns you to the Monitor menu.
Figure 25: Remove Monitor Submenu
Displaying Monitored Points
Automatic logoff occurs after a predetermined amount of inactivity, however:
● The Point Monitor continues to display points and refreshes the Display screen
every four seconds.
● You can scroll the Point Monitor, but the function keys (INFO, ESC, Alarm) are
disabled.
● If you press any of the key functions, the login splash screen prompts you to login.
Do the following to display monitored points.
Figure 26: Display Submenu