Operating Instructions
Table Of Contents
- Cyber security disclaimer
- How to Use This Manual
- Chapter 1—Introduction
- Chapter 2—Hardware Features
- TC Modular Product Diagram
- Expansion Module Product Diagram
- Modular Series Backup Batteries
- Memory
- Communication Connections
- Modular Series Specifications
- Modular Series Smoke Control Application Requirements
- PXM10S/T Product Overview and Description
- TX-I/O Product Range Overview
- PX Series Enclosures and Service Boxes
- Chapter 3—Applications
- Chapter 4—Troubleshooting
- Glossary
- Index
Chapter 2—Hardware Features
Communication Connections
0
45 |
79
Siemens Industry, Inc.
Owner's Manual
588-781
Building Technologies
2018-10-01
Figure 22: Configure Submenu
Figure 23: Edit Point Monitor Submenu
Do the following to configure bundled points in Point Monitor.
Menu/Submenu
Step
Description
Main
Rotate
DIAL
to highlight
Point
Monitor
.
Press
DIAL
/
OK
to select
Point
Monitor
.
Displays the Point Monitor menu.
Point Monitor
Rotate
DIAL
/
OK
to highlight
Configure
.
Displays all available points at the field panel.
Press
DIAL
/
OK
to select
Configure
.
Edit Pt Monitor
Rotate
DIAL
to select desired
point.
Displays all available points and subpoints at the field
panel.
Subpoints Rotate
DIAL
to select subpoint.
Displays a list of subpoints associated with the selected
point.
Press
DIAL
/
OK
to select
Y
or
N
.
Y=Yes; point is monitored.
N=No; point is not monitored. (This is the default setting.)
Press
ESC
. Returns you to the Point Monitor menu.
Resetting Point Monitor
Do the following to reset points in the Point Monitor.
Figure 24: Reset Submenu