Operating Instructions
Table Of Contents
- Cyber security disclaimer
- How to Use This Manual
- Chapter 1—Introduction
- Chapter 2—Hardware Features
- TC Modular Product Diagram
- Expansion Module Product Diagram
- Modular Series Backup Batteries
- Memory
- Communication Connections
- Modular Series Specifications
- Modular Series Smoke Control Application Requirements
- PXM10S/T Product Overview and Description
- TX-I/O Product Range Overview
- PX Series Enclosures and Service Boxes
- Chapter 3—Applications
- Chapter 4—Troubleshooting
- Glossary
- Index
Chapter 2—Hardware Features
TALON Automation Networking
0
20
| 79
Siemens Industry, Inc.
Owner's Manual
588-781
Building Technologies
2018-10-01
Expansion Module Product Diagram
LED, Symbol, or Feature
Status
Indication
1 S - + -- MS/TP Field Level Network (FLN) ports.
2 Expansion connector -- Connection for future expansion devices.
3 RUN (green) ON
Normal operation. 24 Vac power is ON and the module firmware has
booted.
OFF Error.
● 24 Vac input is not present.
● Power is ON, but the module firmware has not booted.
TX (yellow) and RX (yellow) Flashing
Normal operation. Transmitting (TX) or receiving (RX) over the RS-
485 ALN
trunk.
OFF or ON solid Error. No device, no connection, or bad connection.
4 TC Modular Expansion port --
TC Modular connection for an RS-485 Expansion Module or future
expansion devices.
5 Expansion connector -- Connection to the TC Modular.
Modular Series Backup Batteries
The TC Modular Series contains one non-rechargeable AA (LR6) battery and one non-
rechargeable coin cell (BR2032) battery that serve as a power backup in the event of a
power failure. The batteries only discharge during a power loss. They do not recharge.