Operating Instructions

System 600 APOGEE Database Dynamos for Intellution's 32-Bit FIX Owner's Manual
6-14 Siemens Building Technologies, Inc.
Viewing the Data Links
This section demonstrates how to switch to the View application using the QuickView
function. The View Screen shows the results of the data links added to the Draw Screen.
1. Do one of the following:
• Click the QuickView icon,
.
• From the View menu, click QuickView to switch from Draw to the View application.
Switching to View allows you to see the link updating with real data from your
Siemens Building Technologies, Inc. system.
The link should be updating with real-time data. If you see a group of question marks,
such as ????????, this indicates that the driver is having problems communicating with
the hardware. The problem could be that the connection between S600 Database
Dynamos and the S600 network point has not been established.
2. To return to the Draw application, click QuickDraw from the View menu, or press
CTRL+Q.
3. When the picture is complete, save the configuration as FILENAME.ODF (example:
RMTEMP.ODF) by clicking Save-As from the File menu.
Continue with this process until you have finished populating all of the graphics screens with
dynamic information from the Siemens Building Technologies, Inc. system.