Operating Instructions

System 600 APOGEE Database Dynamos for Intellution's 32-Bit FIX Owner's Manual
5-8 Siemens Building Technologies, Inc.
Message:
Unable To Open filename.gdb
Cause: The import file from FIX32 must be present in same directory as
CNVT_FIX.EXE.
Message:
Unable To Open filename.csv
Cause: File dbase.csv must be present in same directory as CNVT_FIX.EXE.
Message:
Unable To Close File filename.csv
Cause: Probably ran out of disk space.
Message:
Unable To Close File filename.gdb
Cause: Probably ran out of disk space.
Message:
Error Creating Point xxxxxx
Cause: Probably ran out of disk space.
Message:
Error: Invalid File Name filename.xxx
Cause: Valid filenames must have either a CSV or GDB extension.
Message:
Error: Point Name 'xxxxxxxx' Improper Length
Cause: Either nothing was entered for the point name in the appropriate field or the point
name exceeds the maximum length of six characters.
Message:
Error: Point Name 'xxxxxx' Contains Illegal Character 'x'
Cause:
Legal characters are A to Z and 0 to 9.
Message:
Warning: Duplicate Point Name 'xxxxxx'
Cause: System 600 APOGEE point names must be unique. Only the first instance of a
particular point name is used. Subsequent names are ignored.
Message:
Error: Unknown Point Type 'xxx'
Cause:
Refer to the CSV File Structure section of this document for valid point types.
Message:
Inform: LCTLR Point Type Found
Cause:
Refer to the
CSV File Structure section of this document for valid point types.
LCTLR points will not be validated or entered into the FIX32 GDB import file.
Message:
Error: Invalid Cabinet Number 'xx’
Cause:
Valid cabinet numbers are from 0 to 99. 00 is also valid.
Message:
Error: Invalid P2 Trunk Number
Cause:
Valid P2 trunk numbers are from 0 to 7. The trunk number must be entered as a
single digit.
Message:
Error: Point Descriptor 'xxxxxxxxxxxxxx' Too Long
Cause:
Maximum number of characters for a point descriptor is twelve. Characters may
be alphanumeric.
Message:
Unable To Write To File filename.csv
Cause: Check for a write protected disk, low disk space, or file attributes of dbase.csv
using attrib.exe.
Message:
Unable To Add Point xxxxxx