Operating Instructions

System 600 APOGEE Database Dynamos for Intellution's 32-Bit FIX Owner's Manual
4-20 Siemens Building Technologies, Inc.
Logical Pulsed Accumulator Input (LPACI)
Figure 4-23 shows the dialog box used to configure an LPACI point block. An LPACI point
counts pulses of one digital input point.
Figure 4-23. Logical Pulsed Accumulator Input Dialog Box.
All of the fields in Table 4-20, except for the Initial Value field, are the same as those
described for the LAI block. Refer to the LAI descriptions for more information regarding
these fields.
Initial Value
For Intellution programming use. Allows the operator to set the value of a point when it is
placed on scan (e.g., to turn on all fans before a batch is run). This does not affect the initial
value set in field panels.