Operating Instructions

System 600 APOGEE Blocks
Siemens Building Technologies, Inc. 4-11
Logical Analog Output (LAO)
Figure 4-5 shows the dialog box used to configure an LAO point block. An LAO provides one
commandable analog output point (e.g., position valves and dampers).
Figure 4-5. Logical Analog Output Dialog Box.
All of the fields in Figure 4-5, except for the Initial Value field, are the same as those
described for the Logical Analog Input Dialog Box. Refer to the LAI descriptions for more
information regarding these fields.
Initial Value
For Intellution programming use. Allows the operator to set the value of a point when it is
placed on scan, e.g., to turn on all fans before a batch is run.
NOTE:
This does not affect the initial value set in field panels for LAO points.