Operating Instructions

Rev. 3, September, 2000
NOTICE
This document contains information proprietary to Siemens Building Technologies, Inc. (“Siemens” ). Any reproduction
or disclosure of this information to unauthorized persons is prohibited, except as is allowed by prior written permission of
Siemens.
Every effort has been made to ensure that the contents of this manual are accurate. Siemens reserves the right to
change the specifications in this manual without notice. Siemens assumes no responsibility for maintaining or upgrading
the contents of this document. THE INFORMATION IN THIS MANUAL IS PRESENTED FOR INFORMATION PURPOSES
ONLY. IT IS NOT A CONTRACTUAL COMMITMENT OR A MODIFICATION OF ANY CONTRACT THAT MAY EXIST
BETWEEN US. THIS INFORMATION IS SUBJECT TO CHANGE WITHOUT NOTICE, AND IS PRESENTED AS IS.
All software described in this document is furnished under a license and may be used or copied only in
accordance with the terms of such license.
SERVICE STATEMENT
Control devices are combined to make a system. Each control device is mechanical in nature and all
mechanical components must be regularly serviced to optimize their operation. All Siemens Building
Technologies, Inc. branch offices and authorized distributors offer Technical Support Programs that will
ensure your continuous, trouble-free system performance.
For further information, contact your nearest Siemens Building Technologies, Inc. representative.
Copyright 2000 by Siemens Building Technologies, Inc.
TO THE READER
Your feedback is important to us. If you have comments about this manual, please submit them to
[e-mail]
APOGEE is a trademark of Siemens Building Technologies, Inc.
Microsoft

is a registered trademark, Windows and Windows NT

are registered trademarks of Microsoft
Corporation.
Intellution

and THE FIX

are registered trademarks of Intellutions, Inc.
FIX MMI

Dynamo Object

are trademarks of Intellution, Inc.
DigiBoard

is a registered trademark of Digi International, Inc.
Company and product names mentioned in this manual are trademarks or registered trademarks of their
respective companies.
All Rights Reserved. No part of this manual may be reproduced, in any form or by any means, without permission in
writing from Siemens.
Printed in U.S.A.