Operating Instructions

Siemens Building Technologies, Inc. 4-1

System 600 APOGEE Blocks

Chapter 4 explains adding System 600 APOGEE points in a FIX database.

This chapter discusses the following topics:

• Overview

• Point Type Definitions

Overview

There are two ways to enter System 600 APOGEE points in a FIX Database.

• Use the System 600 APOGEE - Intellution 32-Bit FIX Conversion Utility described in

Chapter 5. This conversion utility is useful for automating the entry of a large number

of points.

• Use the System 600 APOGEE block dialog boxes, similar to the generic block dialog

boxes used while editing a FIX database. There are eleven System 600 APOGEE

block dialog boxes used to configure database blocks for eleven of the System 600

APOGEE point types. Table 4-1 lists the eleven System 600 APOGEE points that

can be directly configured on a FIX node.

Table 4-1. System 600 APOGEE Points Supported by FIX.

Point Type Description Database Dynamo

LAI Logical Analog Input btk_lai.dll

LAO Logical Analog Output btk_lao.dll

LDI Logical Digital Input btk_ldi.dll

LDO Logical Digital Output btk_ldo.dll

L2SL Logical Two State Latched btk_l2l.dll

L2SP Logical Two State Pulsed btk_l2p.dll

LFSSL Logical Fast/Slow/Stop Latched btk_lfl.dll

LFSSP Logical Fast/Slow/Stop Pulsed btk_lfp.dll

LOOAL Logical On/Off/Auto latched btk_lol.dll

LOOAP Logical On/Off/Auto Pulsed btk_lop.dll

LPACI Logical Pulsed Accumulator Input btk_lpa.dll