Operating Instructions

Installing the Software Module
Siemens Building Technologies, Inc. 3-3
Table 1-1 lists the optional files, relative to the point types that must be supported.
Table 1-1. Optional Files.
Block System 600 APOGEE Point Type
btk_L2L.dll L2SL Point Type
btk_L2P.dll L2SP Point Type
btk_LAI.dll LAI Point Type
btk_LAO.dll LAO Point Type
btk_LDI.dll LDI Point Type
btk_LDO.dll LDO Point Type
btk_LFL.dll LFSSL Point Type
btk_LFP.dll LFSSP Point Type
btk_LOL.dll LOOAL Point Type
btk_LOP.dll LOOAP Point Type
btk_LPA.dll LPACI Point Type
After installation, run the Intellution Database Dynamo Configurator utility BTKCFG.EXE
to add or remove Database Dynamo Block types. BTKCFG.EXE is normally located in
the Fix32 root directory (C:\Fix32\ BtkCfg.exe ). Export any existing FIX32 databases
before running BTKCFG.EXE.
8. From the File menu, click Save.
9. Reboot the system when prompted before continuing.
Configuration
After the system starts, configure the new LocalNet device and Async Server as follows:
1. From the Microsoft Windows NT Toolbar, click Start, and then click Programs.
2. From the S600 DB Dynamos v1.X Program Folder, select LocalNet Configuration
Utility.
3. Select Locate if the utility does not automatically start to find the Digiboard.
4. The Utility will search for the Digiboard and display the following message, LocalNet
is properly configured with 1 Digiboard. To close this utility, click the Close
button.
5. From the Microsoft Windows NT Toolbar, click Start, Settings, Control Panel, and then
Services.
6. Confirm that the service AsyncSvc is Started and Automatic.