Operating Instructions

System 600 APOGEE Database Dynamos for Intellution's 32-Bit FIX Owner's Manual
3-2 Siemens Building Technologies, Inc.
Installing the System 600 APOGEE Database
Dynamos
To install the System 600 APOGEE Database Dynamos, proceed as follows:
1. Log onto Windows NT as an administrator or as a user in the Administrator group. The
user should be a domain administrator for that particular NT machine. Make sure that the
user does not have any other conflicting user rights.
2. Insert the System 600 Database Dynamos for Intellution FIX32 CD-ROM into the CD-
ROM drive (for example, the “D” drive).
• If the installation program starts automatically, proceed to Step 5.
• If installation does not start, proceed to Step 3.
3. From the Microsoft Windows NT Toolbar, click Start, and then Run.
4. Type D:\setup.exe (where “D” represents the CD-ROM drive letter). Proceed to Step 5.
5. The System 600 APOGEE Database Dynamos Installation Setup screen appears. The
self-explanatory screen messages lead you through the following steps:
• Choose the destination location for the Database Dynamos. The default is C:\FIX32.
• Enter the maximum number of FIX 32 Blocks. This number is used to allocate RAM
and hard drive resources for the blocks (2k of each per block). Accuracy is important
because overestimating could result in installation failure due to lack of memory.
• Enter the System 600 APOGEE network node number of the workstation.
• Enter the System 600 APOGEE network communication rate in bps.
• Enter a Program Folder name for the Database Dynamos. The default is S600 DB
Dynamos v1.X.
6. The install program will ask if you would like to configure the new block types. Click Yes
to choose the System 600 APOGEE block types you will need for the FIX application.
7. When the Intellution Database Dynamo Configurator dialog appears, click ADD ALL to
have access to Database Dynamo Blocks for all eleven System 600 APOGEE point
types. If not all blocks are needed, you may choose only the ones applicable to the
application.