Scanner User Manual

20
Scan and Reconstruction
Slice Collimation and Slice Width for Spiral Mode
and HR Spiral Mode
Slice Collimation and Slice Width for Sequence
Mode and HR Sequence Mode
1 mm: 1, 1.25, 2, 3, 5 mm
1.5 mm: 2, 3, 5, 6 mm
2.5 mm: 3, 5, 6, 8, 10 mm
4 mm: 5, 6, 8, 10 mm
5 mm: 6, 8, 10 mm
1.0 mm: 1, 2 mm
1.5 mm: 1.5, 3 mm
2.5 mm: 2.5, 5 mm
4.0 mm: 4, 8 mm
5.0 mm 5, 10 mm
C2-025.630.01.01.02_APPLICATIONGUIDE_SPIRIT.book Page 20 Friday, April 8, 2005 9:55 AM