User Manual

Application Guide

Advanced application

No. 06

Meeting Room – Room Automation

Synco

™

& Gamma

Ventilation with

radiator

heating

with blinds, light

control

according to

occupancy

Highlights

· Flush mount sensor for CO

control

· Room box, the modular system for room automation

· Remote control of individual rooms or room groups

Room setup

· UP 237K, Room temperature controller: The UP 237K measures the room temperature and controls

the radiator heating via the thermo drive actuator. It allows to operate the heating and the fan.

· AQR2576, Flush mount sensor: The AQR2576 measures the air quality (CO

) and controls the fan

accordingly in the auto mode. The AQR offers two digital inputs to connect a standard wall switch to

operate lights and blinds.

· UP 258E21, presence detector: The UP 258 detects occupancy in the room and measures the

brightness. These data are distributed to the AQR2576, to the UP 237 and the devices in the room box.

· AP 641, room box: The room box includes the universal dimmer RS 525/23, the shutter actuator RL

521/23 and the binary output RS 510/23 to control the lights, blinds and the fan.

· N 605, thermo drive actuator: The N 605 receives the heat command from the Contouch room

temperature controller and drives the valve actuator STA23 of the floor heating.

· AP 257/22, weather station: The AP 257 measures the outside temperature, brightness and windspeed

and calculates drive commands for the blind actuator.

· RMB795B, central control unit: The RMB795B is the room group manager which provides individual

time schedules for up to 10 rooms or room groups.