User Manual

Application Guide
Advanced application
No. 05
Meeting Room – Room Automation
Synco
™
& Gamma
31
The temperature of each office or meeting room is acquired and individually controlled. The fan can be operated on
the room temperature controller or controlled by the presence detector. The heating plant is controlled in depend-
ence on the outside temperature and on the heat demand from the rooms. Non-occupancy periods during the night
can be programmed in a time scheduler for each room. During these time periods (night, weekend, holidays), the
room temperatures are automatically reduced. Also during the day the temperature is slightly reduced when the
room is not occupied.
Control of lighting
Presence detectors also help save energy by automatically turning off the lights when the room is not occupied. A
brightness sensor integrated in the presence detector helps switch and dim the lights according to the brightness
level so that the whole room is optimally illuminated using as little artificial light as necessary.
Control of blinds
A weather station outside of the building protects up to 8 facades against excessive solar irradiance in the summer.
This function helps keep meeting rooms cool. The weather station also protects the blinds from damage caused by
storms or other natural influences and controls it according to a time schedule and temperature to save heating
energy during winter nights. Finally, sunlight tracking and shadow outline tracking provide the room users with as
much natural light as possible to ensure optimum working conditions.
Remote control
By integrating a Web server, remote control and monitoring are made possible via Web browser on a PC or
smartphone.