User Manual

20
Info pages overview
Number and content of the info pages depend on the loaded application
User level Service and Description
password level
Shows actual room temperature
and setpoint
Shows actual supply air tempe-
rature and calculated setpoint
or temperature limits
Shows all configured sequen-
ces.
The active sequence flashes
Shows the outside temperature
Shows the status of the analog
outputs in [V].
Y1=3V, Y2=0V, Y3=not used
Shows the status of the relay
outputs Q1…Q3. (I=closed,
0=open).
Q1=closed, Q2=open, Q3=
open
Shows the status of the relay
outputs Q4…Q6. (I = closed, 0
= open)
This page only appears if the
plant works fine. Otherwise a
fault message is displayed.