BA Cover SXG75.QXD 13.09.2005 18:44 Uhr Seite 1 s s issued by BenQ Mobile GmbH & Co.OHG Haidenauplatz 1 D-81667 Munich BenQ Mobile GmbH & Co.OHG All rights reserved. Subject to availability. Rights of modification reserved. Manufactured by BenQ Mobile GmbH & Co.OHG under trademark license of Siemens AG www.siemens.
right page (1) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) Table of Contents © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- See also index at the end of this User Guide See also index at the end of this User Guide Safety precautions ..................... 3 Phone overview ......................... 6 Display symbols ......................... 8 Getting started ......................... 10 Inserting the SIM card/ battery ...................................
left page (2) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) Table of Contents Organiser ................................. 94 Calendar ................................ 94 Dictat. machine ...................... 96 Time zones ............................ 96 Remote sync .......................... 97 Extras ....................................... 99 My menu ............................... 99 SIM toolkit (optional) ............. 99 Alarm clock .......................... 100 FM radio .............
right page (3) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) 3 Safety precautions Information for parents Please read the operating instructions and safety precautions carefully before use. Explain the content to your children and the hazards associated with using the phone. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Remember to comply with legal requirements and local restrictions when using the phone.
left page (4) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Safety precautions Do not open the phone. Only replacing the battery, SIM card and RS MultiMediaCard is permissible. You must not open the battery under any circumstances. Any other changes to this device are strictly prohibited and will invalidate the operating licence. The phone may cause interference in the vicinity of TV sets, radios and PCs.
right page (5) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Bluetooth® Your phone has a Bluetooth interface. This makes it possible to establish a wireless connection of your phone with a headset of a car kit, or with other Bluetooth-enabled devices.
left page (6) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Phone overview Phone overview 1 2 3 4 5 6 7 j Video call key Press the video call key. The phone is in video call mode. k WAP key Open the browser if not predefined. A Call key Dial the number/name displayed/highlighted, take calls. B On/Off/End key • Switched off: Press and hold to switch on. • During a conversation or in an application: press briefly to finish. • In menus: Press and hold to go back to standby mode.
right page (7) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) 1 Earpiece 2 Integrated antenna © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- 3 4 5 Do not obstruct the phone above the battery cover unnecessarily. This reduces the signal quality. Camera lens ; Camera key : Media player key Start the Media player.
left page (8) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Display symbols Display symbols Display symbols (selection) Z Signal strength Y Charging W Battery charge level, e.g. 50% L Contacts P Call records O R Internet M Messages Q Organiser § ¦ ¥ Games Camera Media player Å ¯ Auto answer feature on ® IrDA transmission ¨ © ª ¬ œ ~ Bluetooth activated My stuff (file management) Settings Ê ¹ Ä Alarm set Keypad locked Inst.
right page (9) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Message symbols (selection) Camera symbols p Unread Ù Brightness q Read Ú Zoom factor Û White balance r Draft s Sent t w MMS not sent x MMS read y MMS with DRM contents (page 18) z { E-mail forwarded E-mail with attatchment À Voice mail received MMS received × Flash connected 9 Template: X75, Version 2.
left page (10) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Getting started Getting started Your phone's display is supplied with a protective film. Remove this film slowly before using the phone. In rare cases, static discharge may cause discolouration at the edges of the display. However, this will disappear within approx. 10 minutes. Inserting the SIM card/ battery The service provider supplies you with a SIM card on which all the important data for your line is stored.
right page (11) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- • Insert the battery sideways into the phone 1, then press it downwards 2 until it engages. • To remove, press the retaining tab on the side of the battery, then lift the battery out. • Place the cover in position, then push it towards the front in the direction indicated by the arrow, until it clicks into place.
left page (12) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Getting started • Press on the tray. The tray for the card is opened. You can remove the tray. • Insert the card on the tray (ensure that the chamfered corner is in the correct position 1). Insert the tray with the card into the phone 2 until it snaps in. Y Display during charging. Charging time Charging the battery The battery is not fully charged when delivered.
right page (13) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Operating time Display while in service The operating time depends on the operating conditions. Extreme temperatures considerably reduce the phone’s standby time. Avoid placing the phone in the sun or on a heater.
left page (14) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Switch phone on/off, enter PIN Switch phone on/off, enter PIN Switching the phone on/off Entering the PIN Switching the phone on J Enter PIN using number keys. Asterisks appear to ensure nobody can read your PIN on the display. Correct with l. §OK§ Confirm. Logging on to the network will take a few seconds. B Press and hold On/Off/End key to switch phone on. Enter PIN or confirm request (page 25).
right page (15) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Switching the phone off B Press and hold On/Off/End key. Or B © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Switch off Press briefly and select one of the following options. Switch phone off. Phone switches on automatically if alarm or calendar event occurs. Offline mode Phone is not switched off, but has no connectivity (page 18). The shutdown animation (page 114) is displayed.
left page (16) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Switch phone on/off, enter PIN Switching on your phone for the first time When you switch on the phone for the first time or after the battery has been removed, you are prompted to set the time/date. C Select if you want to enter time/date. Time/Date When you first switch on, set the clock and date so that it displays the correct time. You will not have to make this setting again.
right page (17) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) 17 General instructions Standby mode The phone is in standby mode and is ready for use when the name of the service provider appears on the display. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- B Press and hold the On/Off/End key to return to standby mode from any situation. The following information might be displayed: Logo If logo or wallpaper is enabled (page 113) logo is displayed.
left page (18) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) General instructions Offline mode User guide In offline mode you can operate many phone functions but you are not connected to any network (you are not available for incoming calls and you cannot initiate a call). Symbols This is the mode to be used in aircrafts. Switching between offline and online mode: B C Press briefly and select Offline mode/Online mode. Confirm request. Digital Rights Mgmt.
right page (19) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Main menu Navigation key The main menu is displayed graphically with symbols: The symbol in the centre of the lower line of the display shows the current function when the navigation key is pressed down vertically. C Call up from standby mode. F/I Select application symbols. C Start application.
left page (20) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) General instructions Menu control Standard functions The steps needed to reach a function are shown in a condensed form in the user guide, e. g. to set ringtones Options menu C ¢ T ¢ Ringtones The list contains functions that are offered in several options menus. Open menu. This comprises the following steps: §Options§ C F/I Create new entry. C I C Open main menu. Select T to open Settings menu.
right page (21) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Set as e.g. set picture as wallpaper, logo, screensaver, melodies as ringtones. Rename Rename selected entry. Send Select transmission type (e.g. MMS, SMS, Instant Message, e-mail, IrDA or Bluetooth) and send entry. If you send via Bluetooth, select Search/Known devices/Last connected (page 117).
left page (22) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) General instructions Mark mode Menu speed dialling Within some applications (e.g. Contacts/My Stuff) one or more entries in a list can be highlighted to carry out a function jointly. All menu functions are numbered internally. A function may be selected directly by entering these numbers in sequence. §Options§ E.g., write new SMS (from standby mode): I C Open menu and select Mark. Select entry/entries. Mark/unmark entry.
right page (23) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Task switching Task switching options The phone supports the use of multiple applications at the same time. The function you are currently using is in foreground, the other open applications are in the background. If any applications are currently open, an options menu is offered. You can switch from the current application to the main menu, standby mode or to any open application.
left page (24) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Security Security C ¢ T ¢ Security ¢ PIN codes The phone and SIM card are protected against misuse by several security codes. PIN control Keep these confidential numbers in a safe place where you can access them again if required. PIN codes PIN PIN2 Protects your SIM card (personal identification number). This is needed to set the charge detail display and to access additional functions on special SIM cards.
right page (25) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Change phonecde You define the phone code (4-8 digits) when you call up a phone-code protected function for the first time. It is then valid for all phone-code protected functions. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- To change phone code proceed as with Change PIN. Preventing accidental activation Even if PIN use is deactivated (page 14) confirmation is required to switch on the phone.
left page (26) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Text entry Text entry * Press briefly: Special characters are shown. Press and hold: Open edit menu. Text entry without T9 Press number key repeatedly until the required letter appears. After a brief interval the cursor will advance. Example: 2 Press once briefly to write the letter a, twice to write b etc. Press and hold to write the number. 0 Press once/repeatedly: .,?!’"0+-()@/:_ Press and hold: inserts 0.
right page (27) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Text edit menu Marking text For text entry: You can highlight text in order to copy and paste it to a different place. * Press and hold: The edit menu is displayed: Insert symbol Spell word Mark text Copy/Paste Input language Selecting the input language © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- 27 Select the language in which you want to compose your message. §Options§ Open edit menu.
left page (28) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Text entry Writing with T9 T9-word suggestions The display changes as you proceed. If several options are found in the dictionary for a key sequence (a word), the most probable is displayed first. If the word you want has not been recognised, the next suggestion from T9 may be correct. It is best if you finish a word without looking at the display. Simply press the keys once where the relevant letter is located.
right page (29) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- l Deletes the character to the left of cursor and displays a new possible word! Additional information Within a "T9-word", individual letters may not be edited without first removing the T9 status. In most cases it is better to rewrite the complete word. 0 Set a full stop. Word is concluded if it is followed by space.
left page (30) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Calling Calling With your phone you can make conventional (voice) calls as well as video calls. However, it is not possible to make a voice call and a video call at the same time. Dialling with number keys Video calls J Enter the number (always with prefix/international dialling code). A Press the Call key. C Press. j Press the video call key to make a video call.
right page (31) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Setting the volume +/ - Regulate the volume (only possible during a call). Additional information * Press and hold to switch microphone off. If a Car Kit is used, its volume setting will not affect the usual setting on the phone. International dialling codes 0 Press and hold until a "+" is displayed. Redialling previous numbers Number memo You can enter a number during the call.
left page (32) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Calling If the incoming call is a video call and Show my image is deactivated (default, page 123) Do you want to show your video image? is displayed. You have the following options: §Yes§ Your video is shown to the caller. §No§ The video mute picture is shown to the caller (Select image, page 123). Rejecting a call §Reject§ Press. Or B Press briefly.
right page (33) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- 33 Incoming calls during a call Conference You may need to register for this service with your service provider and set your phone accordingly. During a call, you may be advised that there is another call waiting. You will hear a special tone during the call (page 121).
left page (34) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Calling After the Return to conference call? display, you have the following options: §Yes§ You return to the conference. §No§ You end all calls. Private call Call options The following functions are only available during a call: §Options§ Open menu. Mute call/ Mute sound If switched off, the person on the other end of the line cannot hear you (muting). Also: Press and hold *.
right page (35) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Drop End a call in a conference. Private Make private call in a conference (see page 34). Transfer DTMF Frame rate Adjust how many frames per second the camera will capture. White Balance Adjust the sensitivity to light. Connect two calls in a conference and disconnect oneself.
left page (36) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Calling Tone sequences (DTMF) Using Contacts You can enter control codes (numbers) for remote access to an automatic answering machine while another connection exists. These inputs are transmitted directly as DTMFcodes (control codes). Store numbers and control codes (DTMF codes) in Contacts in the same way as a normal entry. §Options§ Open menu. DTMF Select. J Enter digits and confirm with C. J Enter number.
right page (37) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) 37 Contacts You can store contacts with a variety of phone and fax numbers as well as additional address details. Contacts All contacts (including SIM contacts) and distribution lists. The contacts may contain the following types of entries: Groups All groups. SIM contacts Contacts saved on the SIM card. Filter Apply different filter criteria to all contacts. • Contacts saved on the phone (page 38).
left page (38) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Contacts Several numbers selected Within the tabs: If several contacts or a distribution list is selected: I J • The call key A and the video call key j have no effect. Contacts All contacts (excluding SIM contacts) are displayed in alphabetical order. Distribution lists and groups are displayed additionally. Contacts can include 4 numbers, 4 e-mail addresses, 2 URLs, 2 fax numbers and 2 postal addresses.
right page (39) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Contact options §Options§ Open menu. Set as default Set selected field as default for that type (e.g. default number or e-mail). Current default is marked with *. Create e-mail Send e-mail to selected contact(s). © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Switch tab... Select contact tab for more input fields. Add birthday/ If no birthday is entered, Remove open birthday field.
left page (40) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Contacts Groups Edit Group Groups are collections of contacts that can be used to categorise contacts. A group can have the same incoming audio/video call alert. SIM contacts cannot belong to a group, you have to copy them to the phone contacts first. §Options§ The following groups have already been created and can be renamed but not deleted: Family, Friends, Office, VIP. New group You can add personal groups.
right page (41) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) §Options§ C Open menu and select Save and confirm request with C. • Video telephony: Contacts with a video allowed number (page 42) are listed. Confirm save notification. • E-mail Additional information If you want to save/edit/delete contacts in the protected SIM area, the PIN2 is required.
left page (42) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Contacts Options menu Depending on the current situation, different functions will be offered. These functions can be applied to the entry currently selected as well as to multiple selected entries. §Options§ Open menu. Distribution lists New distr. list Enter name. You can rename the distribution list and attach an audio/video ringtone and a picture. Add to distr.
right page (43) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Media field selected e.g. Play Start playback of current ringtone. Same for video and picture. e.g. Select new ringtone. Same for video and picture. e.g. Confirm to delete current ringtone from contacts. Same for video and picture. ringtone Replace ringtone Remove ringtone © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- General options Synchronise Initiate synchronisation (see below).
left page (44) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Contacts Send contact Filter contacts If you want to send/receive complete contacts, the contact is transmitted as a vCard. I You can send your own/other contacts via Bluetooth, IrDA, SMS, MMS or e-mail. Voice-activated dialling Receiving vCard You can receive contacts included in a message or via IrDA/Bluetooth. You can save vCards as contacts: §Options§ Open menu and select Save contact to save vCard as new contact.
right page (45) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) §Options§ Open menu and select Record voice tag. §Start§ Start recording. A short signal is sounded. An appropriate prompt appears on the display. Speak the name (max. 3 seconds). Repeat the name after playback. A second signal tone is sounded and you are prompted on the display. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- C Confirm completed recording.
left page (46) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Call records Call records C ¢ P ¢ Call records The different call information is listed on 5 tabs: All calls, Dialled calls, Missed calls, Received calls and Time & charges. F Navigate to tabs. Each list displays the 100 most recent calls. Call log lists The number of a caller is displayed if • the caller has switched off the Hide ID function and • the network supports the Caller Id function.
right page (47) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Call log list menu Depending on the current situation, different functions will be offered. §Options§ Call Open menu. Dial number (if number is available) © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- View contact/ If number is saved as Add to Contacts contact, view contact. If number is not yet saved, create new contact.
left page (48) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Camera Camera Displayed information The phone has a front and rear camera (page 6). The following symbols are displayed over the preview: You can view photos/videos recorded with the integrated camera immediately: Ù Ú • Use a picture as background image, logo or screensaver. • Send picture/video via MMS or e-mail. • Save pictures/videos on the phone or on the RS MultiMediaCard (page 11).
right page (49) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Taking pictures/videos Settings prior to taking pictures/recording videos F I © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Confirm save notification. The picture/video is displayed. Zoom in/out in 7 levels. C/ ; Start the camera in picture mode. Take picture. Recording videos Start the camera in video mode. Start recording. You can record up to 5 minutes. §Pause§/§Resume§ Control recording.
left page (50) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Camera Camera options Flash The following functions are available, depending on the current situation. Turn flash auto/off (only included if flash accessory is plugged into phone). Self timer Picture is taken approx. 10 seconds after triggering. For the last 3 seconds, you will hear a signal tone each second. Picture settings/ Video settings Open settings (see below). §Options§ Record Open menu. Start video recording.
right page (51) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12) Default name §Change§ Open settings. J Enter default file name (up to 4 digits). §Options§ Open menu and select Save. Save location §Change§ Open settings. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Phone memory/Card Select default save location and confirm with C. Frame rate (only for video settings) Set how many frames per second the video should capture.
left page (52) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Create message Create message You can create SMS and MMS messages and e-mails. C ¢ M ¢ Create message ¢ Select message type. Additional information You will find information on writing texts with and without T9 in the chapter "Text entry" (page 26). SMS/MMS About SMS You can transmit and receive long messages (up to 760 characters) on your phone.
right page (53) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) SMS options Depending on the current situation, different functions will be offered. §Options§ Open menu. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Add item Select Picture/Video/ Sound. Select file from the corresponding My stuff folder (page 108). Remember that files may be protected (DRM, page 18). If you try to add items that cannot be sent via SMS, message is converted to MMS after confirmation.
left page (54) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Create message MMS options View mode Depending on the current situation, different functions will be offered. If you start the view mode you can change the presentation of the message. §Options§ Open menu. Add item • Picture/Video/Sound (see SMS options). • Text: add text to current slide. • Contact: select and add as vCard. • Appointment: select and add as vCard. Add subject Enter subject.
right page (55) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) SMS/MMS options © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Depending on the current situation, different functions will be offered. §Options§ Open menu. Add recipient See below. Edit recipient Edit entered number/address. Create item • Take picture/Record video: start camera in message mode (page 50). You may also press ; to start the camera. • Record sound: start dictating machine (page 96).
left page (56) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Create message E-mail Your phone has an e-mail program (client). You can use it to create and receive e-mails. If you enter the e-mail editor from another application, eg. the Inbox, all used input fields (To:, CC:, Bcc:, Subject:, Attachment) are displayed. Additional information If the cursor is at the top of the text entry, you can navigate the input fields with G/H.
right page (57) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) E-mail options Depending on the current situation, different functions will be offered. §Options§ Open menu. Add recipient • Add frm Contacts: Open contacts (page 38). • Enter e-mail addr.: Enter address manually. Edit recipient Edit entered address. Add subject Enter subject. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Edit subject Edit subject.
left page (58) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Inbox Inbox The inbox contains all MMS, SMS, CB, e-mail and WAP push messages received on the phone. C ¢M¢ Inbox Or §Inbox§ Press and hold. If a new MMS message is available for downloading, the MMS notification is displayed including number/contact and subject of the MMS. You can download the MMS immediately or later: §Yes§ Receiving messages SMS Or If a new SMS is received a notification is displayed.
right page (59) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Only one CB of the same type is saved. If another message is received, it overwrites the older one. E-mail E-mails are not received automatically. Before an e-mail can be read, it must be retrieved from the server (page 61). © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- WAP push WAP push messages are provided by special service centres.
left page (60) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Inbox Additional information +Set volume. * Switch sound on/off. Only MMS: Navigate within a slide. I E/D Switch to next/previous slide. On first/last page switch to last/first page. Play media file. C Additional information • SMS messages may be stored on the phone memory or on the SIM card. The storage location is indicated with an icon.
right page (61) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Read options menu Depending on the current situation, different functions will be offered. §Options§ Open menu. View Start view mode (page 54). Send CB: If e-mail address is highlighted select MMS/Email. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Send MMS MMS: If e-mail address is highlighted create new MMS. Open link If URL is highlighted: Start browser (page 87).
left page (62) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Inbox POP3 account The inbox on the phone contains all the e-mails that are in the inbox on the POP3 server. You can configure whether or not an e-mail is deleted on the server when deleted on the phone (page 73). IMAP4 account The inbox lists e-mails as well as subscribed folders (e.g. mailboxes). You can subscribe to various folders on the IMAP4 server. E-mails are retrieved only from the subscribed folders.
right page (63) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Retrieve e-mail Move to folder Depending on the download mode (page 73), either entire e-mails or only the headers are retrieved, or you may be asked whether the entire e-mail or only the header should be downloaded. The number of retrieved e-mails is displayed. You can move e-mails from one subscribed folder to another. The move is synchronised with the server the next time you retrieve e-mails.
left page (64) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Inbox Go to URL If URL is highlighted: Start browser and load URL (page 87). Save as bookmark If URL is highlighted: Start Browser and add URL to bookmarks (page 90). Save Select To phone/To card as save location. Downloaded file is saved in corresponding My stuff folder (page 108). Selected vCard is saved as contact. Selected calendar object saved as calendar event.
right page (65) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) WAP push The following messages are displayed: • Service Indication (SI) • Audio, video, image, text • Service loading © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Reading WAP push message Select desired message I and confirm with C. Read messages/information about received data/software. Where required start download.
left page (66) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Message lists Message lists Messages are displayed the same as in the inbox (page 58). The most recently edited/sent message is displayed at the top of the list. Sent messages C ¢ M ¢ Sent messages Drafts The list contains all sent messages and is organised on two tabs: SMS/MMS and e-mail. C ¢ M ¢ Drafts Send options The list is organised on two tabs: SMS/MMS and e-mail.
right page (67) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) 67 Message settings You can configure SMS, MMS, e-mails, cell broadcast (CB), voice mail and instant messages. The following options are displayed: SMS settings Recipient You can set a default recipient for the profile. Select Add fr. contacts and select contact/distribution list or enter number. Validity period Select Maximum/ 1 week/1 day/ 12 hours/1 hour.
left page (68) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Message settings Reset profile Auto SMS delete I Select profile. §Options§ Open menu and select Restore to default. If the function is activated, the oldest SMS message in the Inbox will be deleted upon arrival of a new SMS message. §Yes§ Confirm request. On/Off The SMS profile is reset to an unconfigured state. If your provider has locked a predefined profile, it cannot be reset.
right page (69) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) MMS settings The following options are displayed: C ¢ M ¢ Message settings Name Enter profile name. Connect. profile: Select profile (page 119). ¢ MMS ¢ Select function. MMS profiles The MMS parameters are configured in up to 5 different profiles. Profiles can be renamed, edited and set as default. You will receive the necessary data from your service provider or via the "Setting Configurator" (page 138).
left page (70) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Message settings Home retrieval/Roaming retrieval I You can configure when new MMS messages are to be downloaded from the message server for Home and Roaming retrieval. Req. read report The following settings are possible: Automatic Messages are automatically downloaded as soon as an MMS notification is received. Always ask When an MMS notification is received, you are asked whether to download it or not.
right page (71) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Hide number Allow adverts If the function is activated your number is withheld from the recipient. If the function is deactivated MMSbased advertisements are automatically rejected. Yes/No © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- 71 Activate/deactivate function and confirm with C. Yes/No Activate/deactivate function and confirm with C. Anon.
left page (72) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Message settings Additional information Forwarded and answered e-mails use the account that was used to receive the original e-mail. C ¢ M ¢ Message settings ¢ E-mail ¢ Select function. Activating an account If account is already configured: I Select account and press C to activate. Deleting an account I Select account. §Options§ Open menu and select Delete. §Yes§ Confirm warning request.
right page (73) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) You can edit the following fields: Data service provider: Select connection profile (page 119). Receive server Select POP3/IMAP4. type: © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- POP3 server: If you want to use a POP3 server, enter the Internet address of the receive server or leave the input field empty. POP3 server port: Enter the port number of the POP3 receive server (default: 110).
left page (74) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Message settings Save sent message: Select Yes/No to save a copy of the sent e-mails in the local Sent folder (page 66). To save sent e-mails on server you should set your own address as CC. Include orig on Select Yes/No to include reply: the original text in the reply message or not. Req. deliv. receipt: Select Yes/No. Request read receipt: Select Yes/No.
right page (75) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Topic list Inst. message settings You can configure the types of broadcast messages you want to receive. The list of configured topics is displayed. You can add/remove topics. C ¢ M ¢ Message settings © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- §Options§ Open menu. Topic status Select • Receive: New messages are received and stored in the Inbox. No notification is displayed.
left page (76) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Instant messaging Instant messaging b C ¢ M ¢ Instant messaging This function allows text-based conversation with one or more users who are also registered for this service. This function is not offered by all service providers. Please refer to your service provider for further information. Your dialogue partners are entered in the contact lists.
right page (77) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- 77 Auto login Online contacts If auto login is activated (page 85), the phone uses saved account information (see above) to establish a connection to the server when the phone is powered on. This is a filtered list of all Instant message contacts that are currently online. Log out • Yellow: Contact is busy. §Options§ Open menu and select Exit.
left page (78) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Instant messaging Add new contact Authorisation message You can enter either a mobile number or the Instant message ID. If the user you want to add to your contact list has privacy settings (page 84), the presence is not available immediately. A request is sent to the user. If the user confirms the request an authorisation message is sent. Presence is displayed. Select and confirm with C.
right page (79) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Start conversation Open text input field You can initiate a new conversation from any tab within the Instant message application. During a conversation you can open the input field by pressing C or any key 1-9. §Options§ Open menu and select Start conversation. J Enter text (up to 500 digits). §Options§ Open menu and select Send. • If a single contact is selected, message is sent directly.
left page (80) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Instant messaging View conversation options menu Invite contacts Depending on the current situation, different functions will be offered. During an ongoing conversation or at the start of a new conversation you may invite contacts to join in. §Options§ Open menu. Dial If number is highlighted: Dial number. Send e-mail If e-mail address is highlighted: Create e-mail.
right page (81) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Receive message §View§ Press if you want to view the conversation immediately (page 79). Or §Ignore§ Press if you want to view conversation later. Receive invitation message §Accept§ Press if you want to join the conversation. Or © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- §Reject§ Press if you want to reject the invitation.
left page (82) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Instant messaging Inst. message options menu Depending on the current situation, different functions will be offered. These functions can be applied to the entry currently selected as well as to multiple selected entries. §Options§ Open menu. Start conversation Start conversation with selected contact(s) (page 79). End conversation • Initial message: Reject request. • Ongoing conversation: End conversation. View convers.
right page (83) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Select Logo You can either set a logo from My Stuff or enter a URL pointing to an image to display as logo. The maximum size for a logo is 2 KB with maximum resolution 100x60 pixel. If a logo is already set, it is displayed. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- §Options§ Open menu. Insert image Select file from My stuff folder (page 108). Insert link Enter Internet address.
left page (84) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Instant messaging Private list Alerts All remote users are listed who can see your private presence attributes (page 82). You can configure whether a notification is displayed when you receive new messages while Instant message is not open and you are online. If you want notify the server that a contact no longer has access to your private presence attributes: §Options§ Open menu and select Del. from priv. list.
right page (85) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Sounds Server You can switch sounds on/off. The settings directly correlate to the ringtone settings (page 112). You can configure the server you use for Instant Messages. Depending on your provider you may not be able to edit the server data. I Navigate to input fields. Receiving msgs Select On/Off to activate/deactivate alert for new received messages.
left page (86) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Voice mail Voice mail b Most service providers supply you with a mailbox in which a caller can leave a voice mail for you if • your phone is switched off or not ready to receive, • you do not want to answer, • you are making a phone call (and if Call waiting (page 121) is not activated).
right page (87) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Internet C ¢O¢Select function. Or © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- k Press the key to start the browser. Get the latest information from the Internet that is specifically adapted to the display options of your phone. In addition, you can download games and applications to your phone. Internet access may require registration with the service provider.
left page (88) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Internet §Options§ Open menu and select Save. ID cache Select Enable service/ Disable service. Set whether or not the browser should store your user ID and password. Cookies Select Enabled/Disabled to activate/deactivate cookies. Look and feel I Font size Navigate to functions. Select Small/Medium/Large. Text wrap Select Char. bounds./Word bounds.. Scroll step Select Single line/Half page/ Whole page.
right page (89) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) WAP push Edit profile You can accept or reject message requests from trusted and untrusted sources. If Ask first is set, you can decide for each message request whether or not the content should be loaded. §Options§ I Navigate to functions. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Trusted content/Untrusted content Select Fetch content/ Ignore/Ask first.
left page (90) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Internet Browser options §Options§ Send link Display the URL of the current page for sending via SMS/MMS/e-mail. Privacy Clear cache, Clear cookies or Clear history and confirm with C. Open menu. Go Load entered URL. Prefix Change URL prefix. Home Call up the pre-set homepage for the current profile. Set as startpage Bookmarks list Display the list of stored bookmarks.
right page (91) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) The Internet browser is under licence of: 91 Java Application Manager (JAM) Display the list of Java applications currently available on the phone and manage those applications. I Download Downloads are offered on the Internet. Once downloaded, the content is available to you on the phone.
left page (92) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Internet Security I Navigate to input fields. Application is: Select Trusted/Untrusted. Send/rec. message:/Internet access: Select the security permission for the application. Available settings are: Allow always/Ask at start/ Ask each time/Never Allow. Java settings Navigate to input fields. I Connection profile: Select profile (page 119).
right page (93) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Games C ¢§ Games are offered on the Internet. You can download games to the phone (page 91). Once downloaded, these are available to you via the phone. Some games are already pre-installed on your phone. You will find these listed here: © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- www.siemens.com/sxg75 93 Template: X75, Version 2.
left page (94) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Organiser Organiser Calendar Weekly view C ¢ Q ¢ Calendar You can enter events in the calendar. The time and date must be set for the calendar to work correctly. Events are shown as vertical bars of different colours on the horizontal hour division. The first 2 upcoming events for the current day are displayed below the calendar. AM/PM or 24 h display depends on your settings (page 128).
right page (95) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Calendar options Default repeat Depending on the current view different functions are offered. Set the default repeat state for newly created events. §Options§ Open menu. Delete event Non-repeating event: Confirm with §Yes§. Repeating event: Select §One§/§All§ occurrences. e.g. Daily Switch to the daily/weekly/monthly view. view Go to date Enter the date and confirm.
left page (96) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Organiser New event/Edit event §Snooze§ Events are displayed in all calendar views. Overlapping events are displayed in parallel as different vertical bars. Select the snooze option. Reset the alarm for 10 minutes. §Off§ Disable the alarm. C Launch the calendar and display the event. §Options§ Open menu and select New event/Edit event.
right page (97) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Remote sync C ¢ Q ¢ Remote sync ¢ Select function. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- You can use this function remotely to access externally filed data (addresses, calendar) and synchronise these with the data on your phone. The data can, for example, be saved on a company computer or on the Internet. www.siemens-mobile.
left page (98) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Organiser HTTP authent.: Enable/disable HTTP authentication. Select No/Yes. HTTP usrname: Enter your user name when HTTP authent.: is active. HTTP passwd: Enter your password when HTTP authent.: is active (shown as a series of asterisks). Restore defaults §Options§ Open menu and select Restore defaults. Sync mode I Navigate to input fields.
right page (99) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) 99 Extras My menu Create your own menu with frequently used functions, phone numbers from the contact list or applications. The list of 10 entries is preset. You can, however, change it as you wish. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Using I C Select an entry. A If the selected entry is a phone number, you can also call it with the call key. Confirm.
left page (100) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Extras Alarm clock End alarm C ¢ S ¢ Alarm clock The alarm will ring at the set time, even when the ringtone or the phone is switched off. The alarm clock can be set for each day of the week separately. Set alarm I Select day of the week. §Options§ Open menu and select Set alarm. J Set time (hh:mm). §Options§ Open menu and select Save. The saved alarm is activated automatically.
right page (101) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Additional information • Volume is set by pressing the volume keys +/- (page 6). • An incoming call or messages interrupts the radio application. The radio starts playing again after you reject or end the incoming call.
left page (102) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Extras FM radio options §Options§ Open menu. Preset stations Open list of preset radio stations. Add to presets Add current radio station to preset list. Speakerphone Press §Change§ to turn speakerphone on/off. Auto store Start automatic search for the 10 strongest radio stations and stores them in the preset list. Mono mode Press §Change§ to turn mono audio mode on/off.
right page (103) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) You can use both input fields alternately. C Opens the calculator with the current converted value. Special key functions: * # Set decimal point. Change sign. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Currency When you call up the function, you must enter a basic currency into which the conversions are to be made. J Enter currency (e.g. euro). §Save§ Store entry.
left page (104) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Extras If the sound recorder was started from another application, e.g. Media Player, you return to that state automatically. Additional information • A brief tone sounds when the remaining time available is less then 5 sec. • If available memory is insufficient, recording is not started. If phone runs out of memory during recording, recording stops. An corresponding message is displayed.
right page (105) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) 105 Media player C ¢¦ or : Press to launch the Media player. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- When you view a picture/video or listen to a melody, the application (e.g. Camera, Messages, My stuff) starts the media player automatically. The media player functions are accessible via 4 tabs: Music, Pictures, Videos and Bookmarks. F Select tab.
left page (106) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Media player Create new playlist You can order several tracks in playlists. Playlists Select category on the top level of the music tab and confirm with C. Select and confirm with C. J Enter name and confirm with C. Add files to playlist via the options menu (page 107). Pictures All files are listed with thumbnail, file name and size. Display picture I Select file and confirm with C.
right page (107) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) I Select bookmark and confirm with C. Start Playback music/video directly from bookmark (live stream). © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Music/Video is downloaded. To ensure a continuous playback, the data is buffered on the phone. The playback starts about 5 seconds after the connection was established. The buffer progress is displayed before and during playback.
left page (108) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) My stuff My stuff To organise your files, you can use the file system like a PC file manager. There are some folders in My stuff for various data types for this purpose. If, for example, you want to download new pictures or sounds, the download function is contained in the relevant folder. Remember that pictures and sounds may be protected (DRM, page 18). You can open My stuff either from other applications, e.g.
right page (109) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Folder Content/Options © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Sounds Melodies, records • New entry: Start sound recorder (page 103). Formats (e.g.
left page (110) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) My stuff Options File search The following functions are available, depending on the current situation. For easy file search you can enter several criteria: name, file type and date of creation. §Options§ Open menu. View/Play Start Media player and view/play selected file. New folder Create new folder on the current level and name it. Search Open file search dialogue (see below).
right page (111) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) 111 Settings Profiles C ¢ T ¢ Profiles © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Several settings can be stored in a phone profile, for example to adapt the phone to the surrounding level of noise. • 6 standard profiles are provided with default settings: General, Silent, Meeting, Outdoor, Car kit, Headset. You can edit the default settings.
left page (112) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Settings Ringtones Tone C ¢ T ¢ Ringtones Depending on the selected function, the following options will be offered: Volume On/Off Activate/deactivate melody specified above. You cannot turn off the alarm clock tone. Beep Set ringtone to beep. Ascending Set ringtone to melody with ascending volume. Set the tones on the phone to suit your requirements.
right page (113) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Themes C ¢T¢ Display Themes Load a completely new user interface in your phone. With the press of a key, various functions are re-organised based on a theme, e.g. • switch on/off animation • switch on/off melody © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- • additional animations Theme files are packed to save memory space.
left page (114) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Settings Screensaver Picture displayed when a time period specified by you has elapsed. An incoming callor pressing any key will end the function unless the safety function is activated. I Navigate to input fields. Style: Select style. Picture: If style Picture: is selected: Select file from corresponding folder in My stuff (page 108). Timeout: Select standby time before screensaver is shown.
right page (115) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Greeting message Set a message to be displayed instead of an animation when phone is switched on. J Enter greeting (up to 2 lines). Backlight time Set the backlight duration for the display. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- I Select time and confirm with C. Brightness Set the brightness level for the display. F Decrease/increase brightness and confirm with C.
left page (116) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Settings Connectivity Bluetooth® (BT) C ¢ T ¢ Connectivity Bluetooth is a short-range radio connection by means of which a headset or car kit or such can be connected without the need for wires. IrDA Your phone has an infrared interface. With this interface, you can exchange data such as pictures, ringtones, contacts, business cards or organiser data with other appliances which also have an infrared interface.
right page (117) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Bluetooth active © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- On/Off Activate/deactivate Bluetooth and confirm with C. 117 Search Search for specific categories of devices or for all Bluetooth devices. If Bluetooth is activated, IrDA (Infrared) is deactivated and vice versa. All devices/Audio/Phone/PC Select and confirm with C to start search.
left page (118) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Settings Bluetooth visibility GPRS The device address/name is shown or not to other BT devices if they request this in order to receive or send data. (General Packet Radio Service) I Data counter Select one of the following options and confirm with C. On/Off Activate/deactivate visibility. Auto Set visibility for 5 minutes, then visibility is disabled automatically.
right page (119) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Connect'n profiles b Internet profiles 119 b Depending on your provider up to 25 profiles may be preset containing a collection of settings utilised by applications. Depending on your provider you may rename/edit/delete the profiles via the options menu.
left page (120) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Settings Shortcuts Start function/call number You can assign one important number/function to each softkey, the navigation key (every direction) and the number keys 2 to 9 (speeddial numbers). The function is started or the number is dialled at the touch of a button. Press and hold key to start application/dial number.
right page (121) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Settings Call setup Or Check status Select to display current setting. C ¢ T ¢ Call setup ¢ Select function. b Hide ID When you make a call, your number can be shown on the display of the called party or suppressed. You may need to register separately with your service provider for these functions.
left page (122) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Settings Divert other call types All calls/Data/Fax/Messages Select a call type and confirm with C. §Options§ Open menu and select Set. J Enter the number you want to divert to. Or select Contacts from the options menu and select a contact. Check status b §Options§ Open menu and select Check status. You can check the current divert status for all conditions.
right page (123) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Any key answer Select image Incoming calls can be accepted by pressing any key (except for B). When you do not want to transmit your video image to the caller (Show my image is deactivated) you can select a video mute picture that is shown instead. On/Off Activate/deactivate and confirm with C. Auto volume Set automatic gain control (AGC) and automatic volume control (AVC).
left page (124) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Settings Phone Key tones C ¢ T ¢ Phone Set the tone that is played when pressing keys. Language C ¢ T ¢ Shortcuts Set the language of the display text. Tone/Silent ¢ Select function. Display language Show the currently set display language. When Automatic is set, the language of your home service provider is used. Input language Select a language for text entry. Languages with T9 support are marked with the T9 symbol.
right page (125) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Eject card Device manager (DM) Eject the RS MultiMediaCard from the phone safely without losing data that is still being transmitted to the card. Sessions can be initiated in different ways. C Press to confirm request. If card is still busy, confirm the error message with C and try again later. Memory assistant Start the memory assistant (page 21).
left page (126) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Settings • Access profiles have already been created by your provider. Select and activate a profile. • The access profiles must be configured manually. If necessary, check with your service provider for details. You will find the current settings for the service provider on the Internet at www.siemens.com/ mobilephonescustomercare under "FAQ".
right page (127) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) HTTP authent. Enable/disable HTTP authentication. Select No/Yes. HTTP name: Enter your user name when HTTP authent. is active. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- HTTP password: Enter your password when HTTP authent. is active (shown as a series of asterisks). 127 Master reset Reset the phone to default values (factory setting). This does not affect the SIM card or the network settings.
left page (128) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Settings Clock §Options§§ C ¢ T ¢ Clock The clock must be set correctly once at start-up (page 16). Setting the time and date Time/Date Select and confirm with C. J/I Enter time (hours/minutes) or date (day/month/year) and confirm with C. If Auto time is activated (page 129), the network time is displayed. Open menu and select option. Set time zone Set a new time zone for the selected city. Confirm with §Yes§.
right page (129) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) b Date format Auto time Set the display format for date. If you activate auto time, the time zone is switched automatically to local time by the network. I Select date format and confirm with C. Show clock Set the time and date display in standby mode. On/Off © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- 129 Activate/deactivate and confirm with C. On/Off Activate/deactivate and confirm with C.
left page (130) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Settings Security PIN codes C ¢ T ¢ Security Description on page 24: ¢ Select function. PIN control, Change PIN, Change PIN2, Change phonecde Auto key lock If activated, the keypad is locked automatically if no key has been pressed for one minute in standby mode. This prevents the phone from being used accidentally. However, you can still be called and you can still make an emergency call.
right page (131) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Activate/Deactivate Select and confirm with C. J C Enter the network password and confirm with C to activate/deactivate barring for selected call type. Confirm barring message. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- All outgoing All outgoing calls except emergency numbers are barred. Outg. internat. (International outgoing) Only national calls can be made.
left page (132) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Settings Network Network info C ¢ T ¢ Network Retrieve information about the network operator currently set. Information is displayed. ¢ Select function. Select line b This function is only displayed if it is supported by the service provider. Two separate numbers must be registered on the phone. I Select the currently used line and confirm with C. Additional information This setting affects only outgoing calls.
right page (133) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) b Auto network Mode selection If you activate this function, the phone searches automatically and selects the next network on the preferred network list. Otherwise you can select a different network manually from the network list. Make sure that your service provider supports the selected mode. On/Off Activate/deactivate function and confirm with C.
left page (134) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Settings Accessories C ¢ T ¢ Accessories ¢ Select function. Announce caller Caller ID of an incoming call is announced to user. On/Off Car kit The Car kit profile is activated automatically as soon as the phone is connected to the car kit. Edit profile To edit the Car kit profile see page 111. Auto answer Voice and video calls are accepted automatically after a few seconds. On/Off Activate/deactivate and confirm with C.
right page (135) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Read SMS Edit profile (only for Car Kit Bluetooth) SMS messages received on the phone are read via TTS when the phone is attached to the car kit. To edit Headset profile see page 111. On/Off Activate/deactivate and confirm with C. Key assignments (only for Car Kit Comfort) You can assign new functions to keys on the car kit.
left page (136) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Mobile Phone Manager Mobile Phone Manager MPM (Mobile Phone Manager) enables you to use extended phone functions from your PC. The phone and PC communicate via IrDA, Bluetooth or a data cable (see Accessories, page 147). You can download the newest version of MPM from the Internet: www.siemens.com/sxg75 Please consult the help files and the readme file for further information on the functions and use of MPM.
right page (137) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Phone Explorer Plug & Sync With Phone Explorer you can access your phone's data fast and comfortably. The phone is simply added to your PC's file structure as if it was just another folder on your PC. Plug & Sync can relieve you of routine tasks. With "Music > Phone" you can always transfer your up-to-date music files and playlists to the phone automatically.
left page (138) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Questions & Answers Questions & Answers If you have any questions about using your phone, visit us at www.siemens.com/mobilephonescustomercare any time. For additional help, we have listed below some frequently asked questions and answers. Configuration service To help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet, you can use a configuration service.
right page (139) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Problem Possible causes Charging error (charge icon not displayed). Battery totally discharged. SIM error. No network connection. Phone loses network. Calls not possible. 139 Possible solution 1) Plug in charger cable, battery is on charge. 2) Charge icon appears after approx. 2 hours. 3) Charge battery.
left page (140) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Questions & Answers Problem Possible causes Certain uses of Call restrictions are in place. phone not possible. Impossible to make Memory is full. entries in contacts. Voice mail not functioning. ã flashes to indicate an SMS. ä flashes to indicate an MMS. å flashes to indicate an MMS. Function cannot be set. Capacity problems with, for example, Games & More, ringtones, pictures, videos, SMS archive.
right page (141) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Problem Possible causes PIN error/ PIN2 error. Three wrong entries. © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Phone code error. Service provider code error. Too few/too many menu entries. 141 Possible solution Enter the PUK (MASTER PIN) supplied with the SIM card according to the instructions. If the PUK (MASTER PIN) has been lost, please contact your service provider. Three wrong entries.
left page (142) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) Customer Care Customer Care We offer fast, individual advice! You have several options: Our online support on the Internet: www.siemens.com/ mobilephonescustomercare We can be reached any time, any place. You are given 24 hour support on all aspects of our products.
right page (143) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:13) © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Kenya.....................................................2 72 37 17 Kuwait ....................................................2 45 41 78 Latvia .....................................................7 50 11 18 Lebanon...............................................01 44 30 43 Libya ...............................................02 13 50 28 82 Lithuania ..........
left page (144) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) Care and maintenance Care and maintenance Your phone has been designed and manufactured to the highest of standards and should be treated with great care. The suggestions below will help you to enjoy your phone for many years. • Protect your phone from moisture and humidity. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.
right page (145) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) Product data Declaration of conformity © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- BenQ Mobile hereby declares that the phone described in this user guide is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC (R&TTE). The declaration of conformity (DoC) concerned has been signed.
left page (146) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) SAR SAR European Union (RTTE) and international (ICNIRP) INFORMATION ON RF EXPOSURE / SPECIFIC ABSORPTION RATE (SAR) THIS MODEL MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines.
right page (147) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:31) 147 Accessories Fashion & Carry Handsfree Portable Carrying Cases A range of carry cases is available at specialist shops or you can visit the our online shop at: Headset Basic HHS-500 Simple headset without key to accept calls. Siemens Original Accessories © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- www.siemens.
left page (148) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:31) Accessories Multitainment Car Solutions Flash IFL-600 Plug-in flash module for taking photos in areas with low ambient light. Car Kit Portable HKP-500 The portable handsfree car kit can easily be moved from one car to another. Simply plug into the cigarette lighter socket, connect and talk.
right page (149) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.
left page (150) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.
right page (151) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- • The above provisions does not imply a change in the burden of proof to the detriment of the customer. To invoke this Guarantee, please contact our online support on the Internet www.siemens.com/ mobilephonescustomercare or the Siemens telephone service. The relevant number is to be found in the accompanying user guide. 151 Template: X75, Version 2.
left page (152) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) License Agreement License Agreement This License Agreement ("Agreement") is between You and Siemens Aktiengesellschaft, Germany (“Siemens”).
right page (153) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- (d) You may not reverse engineer, decompile, modify, or disassemble those Licensed Software programs except and only to the extent that such activity is ex-pressly permitted by applicable law notwithstanding this limitation. Parts of the Licensed Software may be supplied by third parties and may be subject to separate license terms.
left page (154) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) License Agreement VISED OF THE POSSIBILITY OF SUCH DAMAGES. THE LIMITATION OF LIABILITY SHALL NOT APPLY IF AND TO THE EXTENT SIEMENS´ LIABILITY IS MANDATORY UNDER THE APPLICABLE LAW E.G. ACCORDING TO PRODUCT LIABILITY LAW OR IN THE EVENT OF INTENTIONAL MISCONDUCT, PERSONAL INJURY OR DEATH. 10. TECHNICAL SUPPORT.
right page (155) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.
left page (156) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) Menu tree Messages > Message settings > SMS settings > SMS profiles Auto header Auto signature Autosave sent Auto SMS delete Emoticons Text size MMS settings E-mail > MMS profiles Retrieval mode Validity period Hide number Anon. messages Req. read report Req.
right page (157) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) Messages > Message settings > Cell broadcast Media album 157 > Rec. broadcasts Cell info display Topic list Voicemail Instant messaging Organiser > Voicemail no.: Vmail notific. > Calendar Dictat.
left page (158) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) Settings Menu tree > Ringtones > Calendar Themes > Melody Tone Alarm clock Inst.msg sounds > Melody Tone Game sounds Startup sound Shutdown sound Display > Logo Screensaver Startup animation Shutdown anim. Greeting message Backlight time Brightness Power save Vibration > Off Standard Helicopter UFO Shock Mosquito Train © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Template: X75, Version 2.
right page (159) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) Settings > Connectivity > IrDA 159 > IrDA active File location Bluetooth > Bluetooth active Data counter File location Connect'n profiles Search Internet profiles Known devices Linger time Last connected My BT name Bluetooth visibility © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- Shortcuts > Left soft key Right soft key Navigation key > Up Down Left Right Number keys > Key 1 ...
left page (160) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.
right page (161) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) Settings > Security > Barrings > All outgoing Content downl'd ? Outg. internat. Content expiry Outg. int.
left page (162) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) Index Index A Accessories ....................................... 147 Car solutions ................................ 148 Energy.......................................... 147 Handsfree..................................... 147 Multitainment .............................. 148 Office ........................................... 147 Settings........................................ 134 Alarm clock.......................................
right page (163) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- 163 D H Data counter..................................... 118 Date format ...................................... 129 Declaration of conformity ................. 145 Device manager................................ 125 Dialled calls (call log) .......................... 46 Dialling code....................................... 30 Dialling with number keys.........
left page (164) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) Index M O Mailbox .............................................. 86 Main menu ......................................... 19 Maintenance of phone ...................... 144 Mark mode ......................................... 22 Master reset...................................... 127 Media player..................................... 105 Bookmarks ................................... 106 Music ........................................
right page (165) of SXG75, FUG en, A31008-H8900-A1-1-7619 (19.09.2005, 20:16) © Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SXG75_Wolf_5_1\out- S Safety precautions ................................ 3 Screensaver ...................................... 114 Security Codes ............................................. 24 Settings........................................ 130 Settings ............................................ 111 Short cuts ......................................... 120 Short message (SMS) .
