Schablone 2004_08_26 Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / cover_front_763.fm / 08.12.
Schablone 2004_08_26 Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / cover_front_763.fm / 08.12.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / SX76x_dslIVZ.fm / 08.12.2006 Contents Schablone 2004_08_26 Contents The Gigaset SX763 WLAN dsl . . . . . . . . . . . . . . . . . . 6 Local area networks with Gigaset products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Wired local area network (Ethernet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Wireless local area network (WLAN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / SX76x_dslIVZ.fm / 08.12.2006 Contents Schablone 2004_08_26 Security Setup Wizard . . . . . . . . . . . . . . . . . . . . . . . 44 Assigning a password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SSID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting up security functions for the wireless network . . . . . . . . .
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / SX76x_dslIVZ.fm / 08.12.2006 Contents Schablone 2004_08_26 Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Regional Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Internet Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . System Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / introduction.fm / 08.12.2006 The Gigaset SX763 WLAN dsl Schablone 2004_08_26 The Gigaset SX763 WLAN dsl The Siemens Gigaset SX763 WLAN dsl is a powerful but simple communications device for connecting your PC or local area network (LAN) to the Internet (via DSL). It contains an integrated ADSL modem (ADSL /ADSL2+) enabling you to access the Internet easily.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / introduction.fm / 08.12.2006 The Gigaset SX763 WLAN dsl Schablone 2004_08_26 Local area networks with Gigaset products You can use the Siemens Gigaset SX763 WLAN dsl to set up a local area network, for example a home network. All PCs in this network can communicate with each other and have access to the Internet.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / introduction.fm / 08.12.2006 The Gigaset SX763 WLAN dsl Schablone 2004_08_26 Wired local area network (Ethernet) In a wired local area network, PCs communicate with one another via an Ethernet cable. When the Siemens Gigaset SX763 WLAN dsl is used, it establishes the connection between the PCs. For this it has four Ethernet LAN ports for connecting four PCs. The PCs have to be equipped with a network port (Ethernet).
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / introduction.fm / 08.12.2006 The Gigaset SX763 WLAN dsl Schablone 2004_08_26 Wireless local area network (WLAN) In a wireless local area network (WLAN), PCs are linked without wires or cables. The PCs have to be equipped with a wireless local area network adapter (WLAN adapter), for example a Gigaset USB Adapter 108.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / introduction.fm / 08.12.2006 Linking wireless networks with the Internet The Gigaset SX763 WLAN dsl has an ADSL interface that permits all stations within its local area network to access the Internet simultaneously. To be able to use this functionality, you need a DSL connection obtainable from an Internet service provider. Find out whether your service provider supports parallel access by several PCs.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / introduction.fm / 08.12.2006 The Gigaset SX763 WLAN dsl Wireless local area networks can work easily together with existing Ethernet networks. If you wish to connect mobile stations to an existing wired network, you must group together all mobile stations into a wireless local area network in infrastructure mode.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / introduction.fm / 08.12.2006 The Gigaset SX763 WLAN dsl Using the Gigaset WLAN Repeater, you can extend your wireless network's coverage. Set it up within the range of your network. The repeater will now transmit data traffic into its own wireless area. This technology allows you to set up wireless networks that cover a much larger area than is possible with a single Gigaset SX763 WLAN dsl.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / introduction.fm / 08.12.2006 The Gigaset SX763 WLAN dsl Schablone 2004_08_26 Internet telephony and connecting analogue phones The Gigaset SX763 WLAN dsl allows a combination of analogue fixed network telephony and Internet telephony (VoIP) over DSL for two analogue telephones and four other wired or wireless VoIP telephones or SIP clients. This provides you with the full benefits of both technologies.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / introduction.fm / 08.12.2006 The Gigaset SX763 WLAN dsl Schablone 2004_08_26 Features and applications The Gigaset SX763 WLAN dsl's wide range of features makes it ideal for a large number of applications, such as: u Internet access The Gigaset SX763 WLAN dsl allows several users to have Internet access via the integrated ADSL /ADSL2+ modem.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / introduction.fm / 08.12.2006 The Gigaset SX763 WLAN dsl Schablone 2004_08_26 u Security functions The Gigaset SX763 WLAN dsl offers comprehensive security measures: – Firewall protection against unauthorised access from the Internet All PCs in the local area network use the Public IP address of the Gigaset SX763 WLAN dsl for their Internet connections, which makes them 'invisible' on the Internet.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006 Schablone 2004_08_26 First steps First steps Pack contents The package contains the following components: Annex A: u 1 Gigaset SX763 WLAN dsl, u 1 mains adapter (230 V/12V 1.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006 Schablone 2004_08_26 First steps Note: An 802.11b-compatible network adapter has a maximum transmission speed of 11 Mbps. An 802.11g-compatible network adapter has a maximum transmission speed of 54 Mbps. A network adapter that supports Super G has a maximum transmission speed of 108 Mbps. or – an Ethernet port (10Base-T or 100Base-TX) A Web browser such as Microsoft Internet Explorer V 6.0 or higher or Mozilla Firefox V 1.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006 First steps Schablone 2004_08_26 Overview of the installation steps The Gigaset SX763 WLAN dsl is supplied in two different versions for Internet and telephone connection, depending on the connection type used in the respective country: Annex A (ADSL) and Annex B (DSL). Installation is described for both versions. 1.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006 First steps Schablone 2004_08_26 Setting up the Gigaset SX763 WLAN dsl Front panel The Gigaset SX763 WLAN dsl can be set up in any suitable location in the home or office. You do not need any special wiring. However, you should comply with the following guidelines: u Operate the Gigaset SX763 WLAN dsl only indoors within a temperature range of 0 to +40 °C. Do not position the Gigaset SX763 WLAN dsl near sources of heat.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006 First steps Schablone 2004_08_26 u Lay the cables so that nobody can trip over them. You should not cover the cables with anything. Please remember: Network connections (LAN) via cables and telephone lines may only be set up with the Gigaset SX763 WLAN dsl within enclosed rooms. Connecting and activating the Gigaset SX763 WLAN dsl Ports on the rear panel The rear panel of the Gigaset SX763 WLAN dsl houses the ports.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006 Schablone 2004_08_26 First steps Element Description Phone1/2 Sockets for connecting two phones, fax or answering machine Reset button The underside of the Gigaset SX763 WLAN dsl houses the reset button. Reset button Reboot function: Press and hold the right end of the button for more than 1 second but less than 5 seconds to reboot the device. This does not affect the configuration settings.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006 First steps Schablone 2004_08_26 Connecting to the splitter data port You can operate the Gigaset SX763 WLAN dsl in two different operating modes in order to set up an Internet connection: – with an integrated ADSL modem – with an external modem, such as a VDSL or cable modem Using the integrated ADSL modem u Annex A version ì Connect the ADSL port (black) on the Gigaset SX763 WLAN dsl to the ADSL socket on the splitter.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006 First steps Schablone 2004_08_26 u Annex B version ì Connect the ADSL port(black) on the Gigaset SX763 WLAN dsl to the DSL socket on the splitter. To do this, use the DSL cable supplied (black). Splitter DSL cable (black) Using an external modem ì Connect the LAN4/WAN port on the Gigaset SX763 WLAN dsl with an external modem. To do this, use the cable supplied (black).
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006 First steps Schablone 2004_08_26 Connecting to the phone port To make conventional calls via the fixed network, you must connect your Gigaset SX763 WLAN dsl with the phone port of the splitter. Analogue phone port u Annex A version ì Connect the Gigaset SX763 WLAN dsl with the splitter as follows: – Insert one plug of the telephone cable supplied (green) into the Line port (green) on the Gigaset SX763 WLAN dsl.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006 Schablone 2004_08_26 First steps Adapter with TAE connector Splitter Telephone cable Connecting to the phone u Annex A version ì Connect the Gigaset SX763 WLAN dsl with the analogue phone as follows: – Insert the plug of the telephone into the Phone 1 or Phone 2 port on the Gigaset SX763 WLAN dsl.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006 Schablone 2004_08_26 First steps Note: If your telephone has the appropriate connector, plug it directly into one of the Phone ports on the Gigaset SX763 WLAN dsl. Adapter with TAE socket Note: You cannot make calls in the event of a power failure. Emergency numbers are also not accessible in this case.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006 Schablone 2004_08_26 First steps If the correct SSID has been entered in your PC's wireless network adapter, the wireless link will be established automatically as soon as you connect your Gigaset SX763 WLAN dsl to the mains (page 27). WLAN adapter ((( Wired ì Connect one of the LAN ports (LAN1 – LAN4, yellow) on the Gigaset SX763 WLAN dsl to the Ethernet network card in your PC.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006 Schablone 2004_08_26 First steps ì Connect the mains adapter cable to the PWR socket on the Gigaset SX763 WLAN dsl. ì Plug the mains adapter into a mains socket. The Gigaset SX763 WLAN dsl is now switched on and ready for operation.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006 First steps Schablone 2004_08_26 Checking the operating state Your Gigaset SX763 WLAN dsl is now ready for use. The LED displays on the front panel of the Gigaset SX763 WLAN dsl provide information about the operating state: The LEDs (from left to right) have the following functions: LED State Status Power On (green) Off The Gigaset SX763 WLAN dsl is connected to the mains.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006 First steps Schablone 2004_08_26 LED Phone 1/ Phone 2 State Status On Flashing The relevant port is configured. The phone is ringing and a call is being received or a call is being conducted. The receiver of the phone connected to the port has been lifted. The port is not configured, no connection is possible. Off When the device is ready for use, the LEDs light up as follows: u The Power LED on the front lights up.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006 First steps Schablone 2004_08_26 Connecting and configuring additional PCs (optional) Once you have configured one PC as described above you can connect additional PCs to the Gigaset SX763 WLAN dsl. You will need an additional cable for each PC you want to connect via cable. For the wireless connection of additional PCs, you will need a wireless network adapter.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 The user interface Schablone 2005_05_02 The user interface You have connected a PC to the Gigaset SX763 WLAN dsl and possibly made the settings in the local area network. You can now configure the Gigaset SX763 WLAN dsl using this PC from the user interface of the Gigaset SX763 WLAN dsl. We recommend for initial configuration that you connect the PC in wired mode.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 The user interface Note: For security reasons you should change this password at a later stage (page 45). A page with security information will appear. You can skip this when configuring the device for the first time. If you carry out all the general and security settings using the wizard as described below, your device and network will be fully protected.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 The user interface Schablone 2005_05_02 The configuration program comprises the following functions: Basic Setup Wizard Use this wizard to make the settings required for connecting to the Internet. You can set up data for your region, make settings for your wireless and wired local network and configure Internet telephony. This is described from page 37.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 The user interface Schablone 2005_05_02 Selecting a language The user interface can be presented in various languages. ì Click Language at the top right of the start screen. ì If you wish to change the preset language, select the new language you require from the list. ì Click OK to apply the setting. Once the procedure has been concluded, the start screen will be displayed again.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 The user interface Schablone 2005_05_02 Elements on the user interface The user interface screens contain the following elements: Button Log Off The Log Off button is always displayed on the right of the user interface. If you click Log Off, the session is ended and the login screen appears again. Help Click the question mark to display explanations about the current user interface screen.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Basic Setup Wizard Schablone 2005_05_02 Basic Setup Wizard The Basic Setup Wizard wizard guides you step by step through the general configuration of the Gigaset SX763 WLAN dsl. This includes settings for your region and your Internet access. Connection to the Internet is established via the Gigaset SX763 WLAN dsl for all PCs connected to it.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Basic Setup Wizard Schablone 2005_05_02 Regional Options You can select your present location for the regional settings on this screen. ì Select the country in which you are currently located from the list. You can set the time so that it automatically switches to summer time and/or another time zone of your choice. ì Select the required option and/or the time zone for your location. ì Click Next >.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Basic Setup Wizard Schablone 2005_05_02 Configuring Internet connections You will find the access data you require for configuring the Internet connection in the documentation you received from your Internet service provider (ISP). You can perform the initial configuration of your Internet connection on this screen. If you want to change the data later on, you can do this in the Advanced Settings (page 54) menu.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Basic Setup Wizard Schablone 2005_05_02 ì Leave the default settings for the parameters MTU, Line mode, Encapsulation, QoS class and VPI / VCI, unless your service provider has provided you with other data. Note: Connection to the Internet is only possible if you have entered all the data for your Internet service provider correctly.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Basic Setup Wizard ì Deactivate PPPoE pass-through if you do not wish to use this function. ì After entering the data click Next > Using UPnP (Universal Plug and Play) PCs with UPnP (Universal Plug & Play) can offer their own network services and automatically use services offered in the network. Further information about this can be found on page 59.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Basic Setup Wizard Schablone 2005_05_02 Telephony You will find the access data you require for configuring Internet telephony (VoIP) in the documentation you received from your service provider. ì Select the option On for VoIP account if you wish to use Internet telephony (default setting).
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Basic Setup Wizard Schablone 2005_05_02 ì Select Other from the Service provider selection menu (default setting) or, if required, use one of the suggested providers from the list. Enter the data you have received from your service provider: User name, Displayed name, Authorization user name, Password, SIP domain, SIP realm, Proxy server address and Registrar server address.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Security Setup Wizard Schablone 2005_05_02 Security Setup Wizard The Security Setup Wizard offers you additional settings for improving your network security.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Security Setup Wizard Schablone 2005_05_02 Assigning a password In the first step of the configuration you can change the password for the user interface. When the device is supplied, the configuration of your Gigaset SX763 WLAN dsl is protected with the admin password. To prevent unauthorised changes to the configuration, you should change the password at regular intervals.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Security Setup Wizard Schablone 2005_05_02 SSID For the wireless network components to be able to communicate with one another, you must use the same SSID (Service Set Identifier). The default SSID for the Gigaset SX763 WLAN dsl is ConnectionPoint. For security reasons you should change this SSID and deactivate SSID broadcast.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Security Setup Wizard Schablone 2005_05_02 Setting up security functions for the wireless network In the next step you can set up the encryption and authentication methods for your wireless network. Wireless networks are even more susceptible to eavesdropping than wired networks. With conventional network adapters, an intruder only needs a device with a WLAN adapter (e.g.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Security Setup Wizard Schablone 2005_05_02 WPA2/WPA with pre-shared key (PSK) WPA is a more advanced procedure than WEP for protecting wireless networks. Dynamic keys, based on TKIP (Temporal Key Integration Protocol) offer increased security. The new standard WPA2 uses AES (Advanced Encryption Standard) for encryption.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Security Setup Wizard If you transmit data wirelessly and not all components in your wireless network support the higher security standard WPA (page 48), we recommend that you activate WEP Encryption. You can choose either the standard 64-bit key or the more robust 128-bit key. The keys are generated in hexadecimal or in ASCII format.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Security Setup Wizard Schablone 2005_05_02 Manual key entry ì Select the Key type, Hex or ASCII. If you select Hex as the key type you can use the characters 0 to 9 and A to F. – With a 64-bit encryption depth, the key is 10 characters long. – With a 128-bit encryption depth, the key is 26 characters long.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Security Setup Wizard Schablone 2005_05_02 Access control within the wireless network In this step you can specify which PCs will have wireless access to the Gigaset SX763 WLAN dsl and hence to the LAN. Access control is based on the MAC address of the PC network adapters. You can enter the MAC addresses for the PCs manually or select these from the list of PCs that are currently logged in.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Security Setup Wizard Schablone 2005_05_02 Note: If you activate MAC access control, you must at least add the PC on which you are configuring the Gigaset SX763 WLAN dsl to the list. Otherwise, you will have no access to the user interface and will receive an appropriate error message.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 Configuring Advanced Settings In the Advanced Settings menu, you can configure all the options for the Gigaset SX763 WLAN dsl. If required, you can also change the settings you made using the wizard. The following table contains the options available in this menu. Menu Description Internet This menu comprises all the setting options relating to the Internet.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 Internet If you have configured the Gigaset SX763 WLAN dsl using the two wizards, you have also configured the WAN connection (Internet access). You can check or change these settings in the Internet menu.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 Internet selection You can activate or deactivate the Internet connection for the Gigaset SX763 WLAN dsl on this screen. You can choose the connection type and set up and edit a number of connection services. ì Select Internet from the Advanced Settings menu.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 ì For an ADSL connection, make the following settings: – Enter the values for VPI / VCI for each connection service that you have received from your Internet service provider. – Enter a description to identify the respective connection service. – Click Add to create a new entry. – Click Delete to delete an entry. – Click OK to save and apply the changes.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 Internet Connection You can set up or change the configuration of your Internet connection on this screen. All the settings you make here must coincide with the features your Internet service provider makes available to you. False information can lead to problems with your Internet connection.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 ì Enter the name of the connection given to you by your service provider in the Access concentrator name field. ì Apply the default settings for the parameters IP address type, IP address, MTU, Line mode, Encapsulation, QoS class and VPI / VCI unless your service provider has provided you with other data. The default settings also depend on your choice of country.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 ì Click OK to apply the settings. If the following two functions are not displayed in the window, click the Show Additional Settings button. PPPoE pass-through If you activate the PPPoE pass-through function, a PC in the network can connect to the Internet via its own connection ID. The router puts this connection through.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings Your Internet service provider will usually provide you with a DNS server that makes this assignment when an Internet connection is set up. If necessary, you can define the DNS server such that it is used manually for the Internet connections. ì In the Advanced Settings – Internet – Internet Connection menu, select DNS Servers.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 MAC Address If you already had Internet access through the same Internet service provider before connecting the Gigaset SX763 WLAN dsl, it is possible that the MAC address of one of your PCs was used for registration when the connection was being set up.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings – Use custom MAC address: Select this option if you have asked your Internet service provider to register a new MAC address and this is not the MAC address of the PC on which you are currently carrying out the configuration. ì Click OK to apply the settings.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 Attack Detection If the firewall functions of the Gigaset SX763 WLAN dsl are activated, the device monitors and limits access to incoming data traffic via the DSL connection with a function called "Stateful Packet Inspection" (SPI). This allows the Gigaset SX763 WLAN dsl to detect and prevent certain types of attack from the Internet, such as Denial-of-Service (DoS).
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 ì Activate the Access Control function by selecting On. You have the following setting options for Access Control: Access Rules You can limit access to the Internet for all or only for certain clients in the network. You can assign a Schedule rule to each access rule, thereby allowing or blocking access to URLs and services. ì Click Add to create an access rule.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings – Specify IP address or Specify MAC address: The rule applies to a PC you have selected via the IP address or MAC address. ì Enter a name for the Comment for the access rule. ì Define the Access level. You can choose Deny access to the Internet or Allow web browsing.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings Using port forwarding (the forwarding of requests to particular ports) the router is forced to send requests from the Internet for a certain service, for example a game, to the appropriate port(s) on the PC on which the game is running. Port triggering is a special variant of port forwarding.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings You can activate or deactivate the NAT function (by default the NAT function is activated). ì In the Advanced Settings – Internet menu, select Address Translation (NAT) and then select the required option. Port Forwarding If you configure Port Forwarding, the Gigaset SX763 WLAN dsl outwardly assumes the role of the server.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings ì ì ì ì Select the required application from the Predefined applications list. Activate Enabled by ticking the check box. Click the Add button. The data for the required service is entered on the screen. Click the Delete button to delete an entry.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings ì ì ì ì ì Comment: Enter a description that makes it easy to identify different entries. Activate Enabled by ticking the check box. Click the Add button to add a new entry. Click the Delete button to delete an entry. Click OK to apply the settings.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings ì Click the Add button to add the entry to the list. ì Click the Delete button to delete the entry from the list. ì Apply the settings by clicking OK. Routing Your Internet service provider can permit you to set up a number of connection services. The entire data traffic between your local network and the Internet uses the first connection service (route) by default.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings If you specify routes by entering the MAC address, you can also enter the device name in order to identify the individual clients. – For each route, choose the Connection service that the respective client is to use to connect to the Internet. A default route is used for all non-listed clients. Click Delete to delete an entry.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings ì Select a service from the Service provider list. ì Enter Domain name, User name and Password. You will have received all the necessary information when you registered with your Service provider. ì Click OK to apply the settings.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings Defining the private IP address for the Gigaset SX763 WLAN dsl On this screen you can change the device's IP address. The preset IP address is 192.168.2.1. This is the Private IP address of the Gigaset SX763 WLAN dsl. This is the address under which the device can be reached in the local network. It can be freely assigned from the block of available addresses.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings The Subnet mask specifies how many address parts of the IP address must be identical for all network components (including routers). Note: New settings can only be made after the Gigaset SX763 WLAN dsl has been rebooted. If necessary, reconfigure the IP address on your PC (including one that is statically assigned) so that it matches the new configuration.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 ì You can define the name of a domain (Windows workgroup) in the Domain name field. Assigning static IP addresses to individual PCs Even if you have activated the DHCP server, you can still assign a static IP address to individual PCs (e.g. when setting up these PCs for NAT functions).
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 Configuring wireless connections If PCs are communicating wirelessly via the Gigaset SX763 WLAN dsl, you should also improve the security of your wireless network. This configuration is made via the Advanced Settings – Wireless Network menu.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings Channel All clients in the network use the set radio channel for wireless data transfer. You can choose between various channels, depending on your current location. ì Select Automatic so that the best channel for transmitting the data is used automatically.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 Sending power ì Select the required sending power for your device. It is recommended that you select a sending power with a range to suit the spatial environment of your local network. A much greater range makes it easier to eavesdrop on your wireless data transfer.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 Security settings in the wireless network If you are sending data over radio channels, we recommend that you activate encryption (WEP or WPA) on the components in the wireless network. WPA offers greater security than WEP. You should therefore select WPA encryption if it is supported by all components in your wireless network.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 WPA2-PSK and WPA2-PSK / WPA-PSK WPA with pre-shared key (WPA-PSK) WPA-PSK is a special WPA mode for private users and users in small companies without their own authentication server.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings WPA and WPA2 with authentication server In large networks (e.g. in companies) WPA enables the use of an additional authentication service. In this case, user access is controlled by user accounts and passwords, in addition to WPA encryption. A RADIUS server acts as an authentication server.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 WEP encryption If WPA is not supported by all components in your wireless network, we recommend that you activate WEP Encryption on the components. ì Choose the WEP option in the Security field. ì Select the Authentication type: – Select Shared to require that each client log in to the network with a specified key.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 Manual key entry ì Select the Key type, Hex or ASCII. If you select Hex as the key type you can use the characters 0 to 9 and A to F. – With a 64-bit encryption depth, the key is 10 characters long. An example of a valid key: 1234567ABC – With a 128-bit encryption depth, the key is 26 characters long.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 Generating a key by means of a Passphrase ì Enter a Passphrase (up to 32 characters) and confirm it by entering it again. Four keys are generated. ì Select one of the four keys as the Default key. ì Click OK to apply the settings.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 Permitted clients On this screen you can specify the PCs that are to have wireless access to the Gigaset SX763 WLAN dsl and hence to your LAN and WLAN. In the Advanced Settings – Wireless Network menu, select Allowed Clients. The default setting for access control is deactivated. This means that all PCs that use the correct SSID can be logged in.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 Note: If you activate MAC access control, you must at least add the PC on which you are configuring the Gigaset SX763 WLAN dsl to the list. Otherwise, you will have no access to the user interface and will receive an appropriate error message.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 u Do not change the default setting for the Internet connection mode (= "permanent connection") if you are using VoIP (page 39). You can only be called via VoIP if this setting is used. Remember, though, that this setting can result in high connection costs if you have agreed a time-based tariff with your Internet service provider.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings – Fixed gain control (input/output): To adjust the volume for call input or output, simply enter a different value. The smaller the value, the lower the volume. Setting up or modifying a VoIP account ì To set up a new account, select On. ì In the Service provider menu, select the Other option or otherwise select one of the preconfigured providers.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 If you wish to add or modify data, click the Show Additional Settings button. If you have selected the Other option, enter the data for Displayed name, Authorization user name, SIP domain, SIP realm, Proxy server address and Registrar server address.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings Phone connectors The two telephone ports Phone 1 and Phone 2 of the Gigaset SX763 WLAN dsl have the internal phone number *1 or *2. ì Click Edit to adapt the settings for an entry (page 91).
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 SIP client accounts ì Make the extension settings for each SIP user account, which is used for registering wireless VoIP phones and other SIP clients with the SIP proxy server of your device. The User name and Extension number are displayed for identifying the individual telephone ports. These extensions have the internal phone numbers *3 to *6.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 ì In the Additional phone numbers fields, you can select which numbers you want to use for calls on this extension with a prefix. You can choose up to six other connection options from the configured fixed network numbers and VoIP accounts. Incoming calls for the selected phone number are signalled.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 Dialing Plans On this screen you can: u Enter your area code, u Define for Internet telephony whether the area code should be automatically dialled, u Specify whether certain phone numbers or prefixes are to be dialled via the Internet or the fixed network, u Enter a call-by-call provider for the fixed network, u Block phone numbers.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 ì If you wish to make all fixed network calls via a call-by-call provider, activate the Preselection function. ì Enter the provider's number in the Preselection number field. ì Choose whether you want to use dialling rules. ì In the Phone number field, enter an individual number or also the first digits of phone numbers (e. g.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 USB Using your device's USB port, you and other users in the local network can u share USB mass storage or u use a USB printer. Notes: u If you connect a USB hub to the USB port of the Gigaset SX763 WLAN dsl, you can connect and use a USB memory and a USB printer at the same time.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 File Server The device's integrated FTP server allows you to manage folders and files in a connected USB mass storage (for example a USB stick or a USB hard disk) and make them available to all users in the local network and on the Internet. Connect a USB data carrier to the Gigaset SX763 WLAN dsl via the USB port.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Schablone 2005_05_02 Configuring Advanced Settings Internet users can access your USB mass storage by entering the public IP address in the Internet browser. As Internet service providers often change this each time someone dials in, it is worth using dynamic DNS (page 71) in addition. For your security, data may only be published on the Internet if it is stored in the \gigaset_ftp directory.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006 Configuring Advanced Settings Schablone 2005_05_02 Print Server Your device's integrated print server allows you to offer a USB printer to all users in the local network. Notes: u The Windows XP or Windows 2000 operating system is a prerequisite for using the print server.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / telefone.fm / 08.12.2006 Call guide Schablone 2005_05_02 Call guide Your Gigaset SX763 WLAN dsl allows you to make calls via the Internet (VoIP) and your fixed line. A description of how to configure your Gigaset SX763 WLAN dsl for using the telephone functions is provided in sections "Telephony" on page 42 and "Setting up Internet telephony (VoIP)" on page 86.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / telefone.fm / 08.12.2006 Schablone 2005_05_02 Call guide Key combination Effect #51# Cancel calling line identification restriction as default *#*51# Calling line identification restriction as default (at exchange) *##51# Cancel calling line identification restriction default (at exchange) Description You have opted to suppress the display of your number by default (see above): Dial #51# to cancel this default.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / telefone.fm / 08.12.2006 Call guide Schablone 2005_05_02 Key combination Effect R0 Reject call waiting R1 Terminate one call and return to the waiting call Description Press R0 to reject an incoming call during a call. The second call is rejected automatically after 120 seconds have elapsed. Press R1 to end the current call. You then switch to the waiting call. The second call is ended automatically when you replace the receiver.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / telefone.fm / 08.12.2006 Call guide Schablone 2005_05_02 Key combination *61*[number]# Effect Description Call forwarding to internal number if absent Dial *61* and the desired internal phone number to which all calls are to be forwarded that are received on this extension and then press the # key.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / telefone.fm / 08.12.2006 Schablone 2005_05_02 Call guide Notes: u If you additionally enter *# in each case before the key combination shown in the table, the settings will be forwarded directly to the exchange and will be activated there. u The phone numbers of waiting calls are not displayed even if the caller permits this.
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006 Administration Schablone 2005_05_02 Administration The Gigaset SX763 WLAN dsl user interface includes several helpful functions for administration.
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006 Administration Schablone 2005_05_02 ì Select the country you are currently in from the list. You can set the time so that it automatically switches to summer time or the Time zone, as required. If you have already configured the basic settings, you can change these here. ì Select the required option or choose the Time zone for your location.
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006 Schablone 2005_05_02 Administration set a System Password when you set up the Security Setup Wizard. If so, you can change it here. ì Enter the old System Password in the Current password field. ì Enter a new system password in the New password field and repeat it in the Confirm new password field. The System Password may contain up to 20 characters. The System Password is case sensitive.
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006 Administration Schablone 2005_05_02 Backing up and restoring a configuration When the Gigaset SX763 WLAN dsl has been configured, it is recommended that you back up the settings. This means you can restore the settings at any time if they are accidentally deleted or overwritten. You can also reset the configuration to the factory settings. You should always do this before handing the device to an external person.
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006 Administration Schablone 2005_05_02 Restoring factory settings You can reset the Gigaset SX763 WLAN dsl to the factory settings. You should do this before making the device available to others or exchanging it through the dealer. Otherwise unauthorised persons may use the Internet access data at your expense. ì Select Reset configuration to factory default settings and click OK.
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006 Schablone 2005_05_02 Administration The firmware version that is currently installed on the device is displayed in the Current firmware version line. ì In the Firmware update file field, enter the file with the new firmware that you have downloaded from the Internet or click Browse to search for the file in your PC's file system. ì Click OK. The firmware will now be updated.
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006 Administration Schablone 2005_05_02 System Log The System Log is displayed in the Status – Device menu. It contains important information about how the device functions and possible problems. This information can also be automatically transferred to a system log server.
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006 Status information Schablone 2005_05_02 Status information Information about configuration and the status of the Gigaset SX763 WLAN dsl is displayed in the Status of the Gigaset SX763 WLAN dsl. On the first screen you will find an overview of the status of the Internet connection, the local and wireless networks and the device.
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006 Schablone 2005_05_02 Status information Telephony u VoIP accounts Shows the status and the data of the VoIP accounts. Device u System time The system time of the device. u Firmware version The firmware version currently installed on the device. ì Click Refresh to refresh this screen and update the displayed data.
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006 Status information Schablone 2005_05_02 u Address translation for your Internet connection turned off The clients in the network are not protected against unauthorised access via the Internet. Information on how to avoid this security risk is given in Section "Setting up the NAT function" on page 65.
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006 Status information Schablone 2005_05_02 Shows the public IP address of the device. u PPPoE pass-through Shows the status of PPPoE pass-through for the DSL or cable connection for establishing an Internet connection directly between a PC and the network. u ADSL Line – Status The status of the cable connection from your device to your DSL port. – Line mode The current line mode used by your DSL port.
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006 Schablone 2005_05_02 Status information Shows the status of the DHCP server of the device for automatic assignment of IP addresses to clients in the local network. u DHCP clients Shows all the clients in the network that have been assigned an IP address. The Host name and the MAC address are listed as identification for each client.
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006 Status information Schablone 2005_05_02 Telephony You will find information about the VoIP accounts and statistic on the phone calls on the Telephony screen in the Status menu. u VoIP accounts Shows the data and the status of the VoIP accounts. u SIP client accounts All WLAN handsets currently set up as extensions or other SIP clients in your local network are displayed.
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006 Status information Schablone 2005_05_02 Shows your device's hardware version. u Serial number Shows your device's serial number. u System Log The system log contains important information about how the device functions and possible problems. You can adapt the scope of the system log to suit your requirements (see "System Log" on page 110). ì Click Refresh to refresh this screen and update the displayed data.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / printer.fm / 08.12.2006 Installing the printer port for network printers Schablone 2004_08_26 Installing the printer port for network printers Your Gigaset SX763 WLAN dsl is equipped with a USB port that you can use, for example, to connect a printer for use as the network printer. The Windows XP or Windows 2000 operating system is a prerequisite for connecting a printer.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / printer.fm / 08.12.2006 Schablone 2004_08_26 Installing the printer port for network printers Installing a standard TCP/IP printer port under Windows XP/ 2000 You can use the standard TCP/IP port driver available in this operating system. Make sure that the Gigaset SX763 WLAN dsl is connected and can be reached in the network. A printer need not be connected to the USB port on your Gigaset SX763 WLAN dsl at this point.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / printer.fm / 08.12.2006 Schablone 2004_08_26 Installing the printer port for network printers ì In the Add Printer Wizard, click Next. The printer port you are installing will behave like an additional parallel port on the PC. For this reason you must click the option button next to Local printer in this window. The Automatically detect and install my Plug and Play printer check box must not be selected. ì Click Next.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / printer.fm / 08.12.2006 Schablone 2004_08_26 Installing the printer port for network printers ì Click the Create a new port option button. ì Then select Standard TCP/IP Port from the selection menu in the field next to this option. ì Click Next. ì In the wizard for setting up a standard TCPI/IP port, click Next.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / printer.fm / 08.12.2006 Schablone 2004_08_26 Installing the printer port for network printers ì In the Printer Name or IP Address input field, enter the IP address of the print server (Gigaset SX763 WLAN dsl): e.g. 192.168.2.1. A copy of your entry is displayed in the second field. ì Double-click in the Port Name field and enter a name. This name will appear in the list of printer ports. Name this port, for example, Gigaset_printerport.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / printer.fm / 08.12.2006 Schablone 2004_08_26 Installing the printer port for network printers ì Enter the following data in the relevant fields: – Printer name or IP address: Enter the IP address of the print server. – Protocol Choose the option LPR. – Queue name: lp0 (lowercase: lima, papa, number 0) ì Click OK ì Click Next. The window for finishing the wizard is opened and shows you all the settings you have made.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / printer.fm / 08.12.2006 Schablone 2004_08_26 Installing the printer port for network printers ì Click Finish. Once the wizard for installing the printer port is finished, the Add Printer Wizard is opened. ì If you wish to install a printer for this port immediately, click Next and follow the instructions of the Add Printer Wizard.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / printer.fm / 08.12.2006 Installing the printer port for network printers Schablone 2004_08_26 ì If you do not wish to install a printer until later, click Cancel. Note: The print server of the Gigaset SX763 WLAN dsl does not work bidirectionally. It does not evaluate any of the printer's response messages. For this reason please make sure that your printer is likewise only configured unidirectionally.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / printer.fm / 08.12.2006 Installing the printer port for network printers Schablone 2004_08_26 Instructions for setting up a printer on the PC Once you have installed the printer port you still cannot start printing. The printer port is nothing more than an additional interface on your PC, comparable with the USB port.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / appendix.fm / 08.12.2006 Appendix Schablone 2004_08_26 Appendix Troubleshooting This section describes common problems and their solution. Any problems can be identified from the different LED displays. If you cannot solve the connection problem after checking the LED displays, please consult the sections of the following table. Further help is available on the Internet at http://www.siemens.com/gigasetcustomercare.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / appendix.fm / 08.12.2006 Schablone 2004_08_26 Appendix Symptom Possible cause and solutions The LAN LED on a connected device does not light up. No LAN connection ì Make sure the connected device is turned on. ì Check whether the Ethernet cable is plugged in. ì Check that you are using the right cable type (CAT5) and that the cable is not too long (100m). ì Check that the network card on the connected device and the cables are not defective.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / appendix.fm / 08.12.2006 Schablone 2004_08_26 Appendix Symptom Possible cause and solutions You cannot open a connection from a wireless device to the Gigaset SX763 WLAN dsl. u The wireless network adapter is not using the cor- rect SSID. ì Change the SSID on the network adapter. u Either encryption has been activated on the Gigaset SX763 WLAN dsl but not on the wireless network adapter or it is using the wrong key.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / appendix.fm / 08.12.2006 Appendix Schablone 2004_08_26 Symptom No connection to the configuration environment of the Gigaset SX763 WLAN dsl. Possible cause and solutions ì Use the ping command to check whether you can establish a network connection to the Gigaset SX763 WLAN dsl. ì Check the network cable between the PC you want to use to administer the device and the Gigaset SX763 WLAN dsl.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / appendix.fm / 08.12.2006 Schablone 2004_08_26 Appendix Operating information: u USB port If connecting a device without its own power supply directly to the USB port, please note that the power consumption must not exceed 500mA. If this value is exceeded, you will have to use a separate power supply unit for your USB device or connect a USB hub with a separate power supply.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / appendix.fm / 08.12.2006 Schablone 2004_08_26 Appendix Configuring a popup blocker If working with Windows XP Service Pack 2, popups are blocked by default. You must allow popups for the configuration program in order to start it. Carry out the following steps: ì Right-click the browser information bar. ì Select Allow popups from this screen. ì Confirm the dialogue window by clicking OK.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / appendix.fm / 08.12.2006 Appendix Schablone 2004_08_26 Specifications Interfaces 1 DSL RJ-11 (Annex A) 4 LAN RJ45, 10Base-T/100Base-TX, Auto-sensing RJ45, ITU G.992.1 (Annex B) 1 USB USB 2.0, for printer server or file server (max. 500 mA) 1 FXO RJ45, for connecting to the analogue telephone network 2 FXS RJ11, for connecting analogue terminals (phone, fax, answering machine) WLAN 802.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / appendix.fm / 08.12.2006 Appendix Schablone 2004_08_26 Software Browser-based configuration environment NAT, PPPoE, PPPoA VPN pass-through, L2TP, IPSec DHCP server and client, DynDNS NAT, virtual server, DMZ Security setup Firewall, prevention of hacker attacks MAC address filtering Log file WEP encryption WPA encryption WPA2 encryption IEEE 802.1x Integrated SIP client Authorisation This device is intended for analogue phone lines worldwide.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / appendix.fm / 08.12.2006 Schablone 2004_08_26 Appendix Communication Devices GmbH & Co. KG are governed by the relevant Open Source Software license conditions. Your compliance with those license conditions will entitle you to use the Open Source Software as foreseen in the relevant license.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / glossary.fm / 08.12.2006 Glossary Schablone 2004_08_26 Glossary Access point An access point, such as the Gigaset SX763 WLAN dsl, is the centre of a wireless local network (WLAN). It handles the connection of the wireless linked network components and regulates the data traffic in the wireless network. The access point also serves as an interface to other networks, for example an existing Ethernet LAN or via a modem to the Internet.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / glossary.fm / 08.12.2006 Schablone 2004_08_26 Glossary Broadcast A broadcast is a data packet not directed to a particular recipient but to all the network components in the network. The Gigaset SX763 WLAN dsl does not pass on broadcast packets; they always remain within the local network (LAN) it administers. BSSID Basic Service Set ID BSSID permits unique differentiation of one wireless network (WLAN) from another.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / glossary.fm / 08.12.2006 Schablone 2004_08_26 Glossary DNS Domain Name System DNS permits the assignment of IP addresses to computers or Domain names that are easier to remember. A DNS server must administer this information for each LAN with an Internet connection. As soon as a page on the Internet is called up, the browser obtains the corresponding IP address from the DNS server so that it can establish the connection.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / glossary.fm / 08.12.2006 Schablone 2004_08_26 Glossary DynDNS Dynamic DNS The assignment of Domain names and IP addresses is handled by the Domain Name Service (DNS). This service is now enhanced with so-called Dynamic DNS (DynDNS) for Dynamic IP addresses. This enables the use of a network component with a dynamic IP address as a Server on the Internet.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / glossary.fm / 08.12.2006 Schablone 2004_08_26 Glossary Half duplex Operating mode for data transmission. Only one side can send and/or receive data at the same time. See also: Full duplex HTTP proxy An HTTP proxy is a Server that network components use for their Internet traffic. All requests are sent via the proxy.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / glossary.fm / 08.12.2006 Schablone 2004_08_26 Glossary Internet The Internet is a wide-area network (WAN) linking several million users around the world. A number of Protocols have been created for exchanging data, and these are known collectively as TCP/IP. All participants on the Internet can be identified by an IP address. Servers are addressed by Domain names (e.g. siemens.com).
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / glossary.fm / 08.12.2006 Schablone 2004_08_26 Glossary IP pool range The Gigaset SX763 WLAN dsl's IP address pool defines a range of IP addresses that the router's DHCP server can use to assign Dynamic IP addresses. ISP (Internet Service Provider) Internet service provider LAN Local network A local area network (or local network) links network components so that they can exchange data and share resources.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / glossary.fm / 08.12.2006 Schablone 2004_08_26 Glossary NAT Network Address Translation NAT is a method for converting IP addresses (Private IP addresses) within a network into one or several Public IP addresses on the Internet. With NAT, several network components in a LAN can share the router's public IP address to connect to the Internet.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / glossary.fm / 08.12.2006 Schablone 2004_08_26 Glossary Port forwarding In port forwarding, the Gigaset SX763 WLAN dsl directs data packets from the Internet that are addressed to a particular Port to the corresponding port of the appropriate network component. This enables servers within the local network to offer services on the Internet without them needing a Public IP address.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / glossary.fm / 08.12.2006 Schablone 2004_08_26 Glossary Rekey interval The rekey interval is the period after which new keys are automatically generated for data encryption with WPA-PSK. Remote management Remote management refers to the ability to manage a network from a network component that is actually outside the local network (LAN).
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / glossary.fm / 08.12.2006 Schablone 2004_08_26 Glossary SMTP Simple Mail Transfer Protocol The SMTP Protocol is part of the TCP/IP protocol family. It governs the exchange of electronic mail on the Internet. Your Internet service provider provides you with access to an SMTP server. SNMP Simple Network Management Protocol The SNMP Protocol is part of the TCP/IP protocol family.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / glossary.fm / 08.12.2006 Schablone 2004_08_26 Glossary TCP Transmission Control Protocol The TCP Protocol is part of the TCP/IP protocol family. TCP handles data transport between communication partners (applications). TCP is a session-based transfer protocol, i.e. it sets up, monitors and terminates a connection for transferring data. See also: UDP TCP/IP Protocol family on which the Internet is based.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / glossary.fm / 08.12.2006 Schablone 2004_08_26 Glossary Virtual server A virtual Server provides a service on the Internet that runs not on itself, but on another network component. The Gigaset SX763 WLAN dsl can be configured as a virtual server. It will then direct incoming calls for a service via Port forwarding directly to the appropriate Port of the network component in question.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / glossary.fm / 08.12.2006 Schablone 2004_08_26 Glossary WLAN Wireless LAN Wireless LANs enable network components to communicate with a network using radio waves as the transport medium. A wireless LAN can be connected as an extension to a wired LAN or it can form the basis for a new network. The basic element of a wireless network is the cell. This is the area where the wireless communication takes place.
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / SX76x_dslSIX.fm / 08.12.2006 Index Schablone 2004_08_26 Index Numerics 10/100 Mbps switch port . . . . . . . . . . 20 128-bit encryption . . . . . . . . . . . . . . . 83 128-bit key . . . . . . . . . . . . . . . . . 49, 82 64-bit key . . . . . . . . . . . . . . . . . . 49, 82 A Access control . . . . . . . . . . . . 51, 63, 85 local area network . . . . . . . . . . . . . 85 Access point . . . . . . . . . . . . .
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / SX76x_dslSIX.fm / 08.12.2006 Schablone 2004_08_26 Index DSL . . . . . . . . . . . . . . . . . . . . . . . . . 138 DSL interface configuring . . . . . . . . . . . . . . . . . . 37 Dynamic DNS see DynDNS Dynamic Host Configuration Protocol, see DHCP Dynamic IP address . . . . . . . . . . . . . 138 DynDNS . . . . . . . . . . . . . . . . . . . 71, 139 DynDNS service, see DynDNS DynDNS.org. . . . . . . . . . . . . . . . . . . . 71 E Encryption . . . . .
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / SX76x_dslSIX.fm / 08.12.2006 Schablone 2004_08_26 Index Internet Explorer . . . . . . . . . . . . . 17, 32 Internet protocol see IP protocol Internet service provider . . 57, 141, 142 Internet telephony . . . . . . . . . . . . . 6, 13 analogue phone . . . . . . . . . . . . . . . 86 dialling plans . . . . . . . . . . . . . . . . . 93 setting up. . . . . . . . . . . . . . . . . . . . 86 VoIP settings . . . . . . . . . . . . . . . . . 87 Internet time .
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / SX76x_dslSIX.fm / 08.12.2006 Index Schablone 2004_08_26 P Pack contents . . . . . . . . . . . . . . . . . . 16 Passphrase . . . . . . . . . . . . . . . . . . . . 50 Password . . . . . . . . . . . . . . . . . . . 32, 45 assigning . . . . . . . . . . . . . . . . . . . . 45 changing . . . . . . . . . . . . . . . . . . . . 45 forgotten . . . . . . . . . . . . . . . . . . . . 45 Permanent Virtual Circuit see PVC Phone analogue . . . . . . . . . . . . .
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / SX76x_dslSIX.fm / 08.12.2006 Schablone 2004_08_26 Index SPI (Stateful Packet Inspection), see SPI Splitter . . . . . . . . . . . . . . . . . . . . 22, 23 SSID. . . . . . . . . . . . . . . . 18, 26, 46, 146 changing . . . . . . . . . . . . . . . . . . . . 46 concealed . . . . . . . . . . . . . . . . . . . 77 default setting on router . . . . . . . . 18 visible . . . . . . . . . . . . . . . . . . . 46, 77 SSID broadcast . . . . . . . . . . . . . . .
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / SX76x_dslSIX.fm / 08.12.2006 Schablone 2004_08_26 Index VoIP see Internet telephony VPI. . . . . . . . . . . . . . . . . . . . . . . . . . 148 W WAN . . . . . . . . . . . . . . . . . . . . . . . . 148 WDS . . . . . . . . . . . . . . . . . . . . . . . . . 78 WEP . . . . . . . . . . . . . 47, 48, 79, 82, 148 encryption mode . . . . . . . . . . . . . . 82 hexadecimal . . . . . . . . . . . . . . . . . . 50 key length . . . . . . . . . . . . . . . .
Schablone 2004_08_26 Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / cover_back.fm / 08.12.2006 Issued by Siemens Home and Office Communication Devices GmbH & Co. KG Schlavenhorst 66 D-46395 Bocholt © Siemens Home and Office Communication Devices GmbH & Co. KG 2007 All rights reserved. Subject to availability. Rights of modification reserved. www.siemens.com/gigaset No.
