SX66
SX66 User Manual Please Read Before Proceeding THIS DEVICE IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. WHEN INSERTING YOUR SIM CARD, MAKE SURE THE DEVICE IS POWERED OFF, AND THAT THE SIM CARD SNAPS INTO THE SOCKET. YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE’S OUTER CASING.
SX66 User Manual Important Safety Precautions When using this product, the safety precautions below must be taken to offset possible legal liabilities and damages. n ELECTRICAL SAFETY This product is intended for use when supplied with power from the battery. Other usage may be dangerous and will invalidate any approval given to this product.
SX66 User Manual Contents Safety Precautions and Legal Notices Chapter 1 Getting Started 1.1 Knowing Your Device ...................... 1.2 Battery........................................... 1.3 Accessories .................................... Chapter 2 Knowing Your Phone 2.1 2.2 2.3 2.4 2.5 2.6 Chapter 3 9 38 39 41 43 44 Starting Up..................................... Entering Information....................... Writing on the Screen ..................... Drawing on the Screen...................
SX66 User Manual Chapter 4 4.1 4.2 4.3 4.4 Chapter 5 Synchronizing Information 78 Using ActiveSync ............................ Synchronizing Information ............... Infrared and Bluetooth Connection... ActiveSync Errors ............................ 79 80 82 83 Personalizing Your Phone 84 5.1 Device Settings............................... 5.2 Phone Settings ............................... Chapter 6 Getting Connected 6.1 About Connections.......................... 6.
SX66 User Manual Chapter 7 7.1 7.2 7.3 7.4 Chapter 8 Using Microsoft Outlook 120 Calendar......................................... Contacts......................................... Tasks ............................................. Notes ............................................ 121 123 125 126 Messaging Features 128 8.1 E-Mail and Text Messages................ 8.2 MSN Messenger .............................. 8.3 MMS Messages ............................... Chapter 9 9.1 9.2 9.3 9.4 9.
SX66 User Manual Chapter 10 Using Album 151 Appendix A Adding or Removing Programs ....................... Managing Memory ........................................ Backing Up Files ........................................... Resetting the SX66 ...................................... 162 163 165 166 Appendix B Regulatory Agency IDs .................................. European Union Notice.................................. FCC Compliance Statement............................
SX66 User Manual
Safety Precautions and Legal Notices
SX66 User Manual Legal Notices The mobile phone described in this guide is approved for use on the GSM and GPRS networks operating on the GSM 850/900/1800/1900 bands. It is approved for use in the country where it was originally sold and may be approved for use in other countries. © 2004 Siemens Information and Communication Mobile, LLC. All rights reserved.
SX66 User Manual 11 use. Some of these Network Services may not be available when roaming on a network other than your home network. Standby and Talk Time Information The mobile phone incorporates features that are new to the mobile phone world. These may include color displays and lighting, graphic games, music reproduction and browsing the Internet. The way you use the display and the features will affect the performance of the battery and how long it lasts between charge cycles.
SX66 User Manual Safety Precautions Please read the operating instructions and safety precautions carefully before use. Information for parents Explain the conent and the hazards associated with using the phone to your children. Remember to comply with legal requirements and local restrictions when using the phone. For example, in air planes, gas stations, hospitals or while driving. Cellular phones can interfere with the functioning of medical devices such as hearing aids or pacemakers.
SX66 User Manual 13 Do not open the phone. Only the battery (100% mercury-free) or SIM card may be replaced. You must not open the battery under any circumstances. Any other changes to this device are strictly prohibited, as they will invalidate the type approval required for operation of the unit. Important Please dispose of unwanted batteries and phones as specified by the laws in your country. The phone may cause interference close to TVs, radios and PCs. Use only Siemens original accessories.
SX66 User Manual Tips on efficient operation • Extend your antenna fully (if applicable). • Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Driving Laws pertaining to the use of mobile phones while driving vary significantly from state to state and sometimes even from locality to locality within states.
SX66 User Manual 15 • should not carry the phone in a breast pocket; • should use the ear opposite the pacemaker to minimize the potential for interference; • should turn the phone OFF immediately if there is any reason to suspect that interference is taking place. Hearing aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider or your hearing aid manufacturer to discuss alternatives.
SX66 User Manual Potentially explosive atmospheres Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often but not always clearly marked.
SX66 User Manual 17 Battery safety precautions To reduce the risk of fire, injury or electric shock, and to properly dispose of batteries, please read and understand the following instructions. CONTAINS LITHIUM POLYMER BATTERY. BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. DO NOT DISPOSE IN MUNICIPAL WASTE. 1. Only use the batteries specified for use with this mobile phone. 2. Do not use batteries of different sizes or from different manufacturers in this mobile phone. 3.
SX66 User Manual When calling customer service, please have ready your receipt and the phone identity number (IMEI, to display press * # 0 6 #), the software version (to display, press * # 0 6 #, then info) and if available, your Siemens Service customer number. Note Only qualified service personnel must repair equipment. If repair work is necessary, please contact one of our service centres: Abu Dhabi........................................ 0 26 42 38 00 Australia......................................
SX66 User Manual 19 Quality Battery quality statement The capacity of your cellular phone battery will be reduced every time it is charged/discharged. Storage at excessively high or low temperatures will also result in a gradual capacity loss. As a result, the operating time of your cellular phone may be considerably reduced, even after a full recharge of the battery.
SX66 User Manual to address these questions, no clear picture of the biological effects of this type of radiation has emerged to date. Thus, the available science does not allow us to conclude that mobile phones are absolutely safe, or that they are unsafe. However, the available scientific evidence does not demonstrate adverse health effects associated with the use of mobile phones.
SX66 User Manual 21 When 20 types of glioma were considered separately, however, an association was found between mobile phone use and one rare type of glioma, neuroepithelliomatous tumors. It is possible with multiple comparisons of the same sample that this association occurred by chance. Moreover, the risk did not increase with how often the mobile phone was used, or the length of the calls. In fact, the risk actually decreased with cumulative hours of mobile phone use.
SX66 User Manual What is known about cases of human cancer that have been reported in users of hand-held mobile phones? Some people who have used mobile phones have been diagnosed with brain cancer. But it is important to understand that this type of cancer also occurs among people who have not used mobile phones. In fact, brain cancer occurs in the U.S. population at a rate of about 6 new cases per 100,000 people each year.
SX66 User Manual • Federal Communications Commission • Occupational Health and Safety Administration • National Telecommunications and Information Administration 23 The National Institutes of Health also participates in this group. In the absence of conclusive information about any possible risk, what can concerned individuals do? If there is a risk from these products – and at this point we do not know that there is – it is probably very small.
SX66 User Manual Tice et al. Tests of mobile phone signals for activity in genotoxicity and other laboratory assays. In: Annual Meeting of the Environmental Mutagen Society; March 29, 1999, Washington, DC; and personal communication, unpublished results. 2 Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim, E, and Varey, A. Effect of a 915-MHz simulated mobile phone signal on cognitive function in man. Int. J. Radiat. Biol., April 8, 1999.
SX66 User Manual 25 removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voicemail answer it for you. Suspend conversations during hazardous driving conditions or situations Let the person you are speaking to know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road.
SX66 User Manual Use your phone to help others in emergencies Your wireless phone provides you a perfect opportunity to be a “good Samaritan” in your community. If you see an auto accident, crime in progress or other serious emergencies where lives are in danger, call 9-1-1, as you would want others to do for you.
SX66 User Manual 27 patents by the Product or any parts thereof. Laws in the United States and other countries preserve for Siemens certain exclusive rights for copyrighted Siemens software, such as the exclusive rights to reproduce and distribute copies of such Siemens software. Siemens software may be used only in the Product in which the software was originally embodied when purchased, and such software in such Product may not be replaced, copied, distributed.
SX66 User Manual Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Internet Association (CTIA) web-site at www.phonefacts.net or the Canadian Wireless Telecommunications Association (CWTA) website www.cwta.ca SAR information on this Siemens SX66 phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID NM8BLUEANGEL.
SX66 User Manual 29 sale, lease, or rental). Reconditioned replacement components, parts or materials may be used in the replacement or repair. Data in the memory of the phone or SIM Card may be lost during repair. This Limited Warranty does not cover and is void with respect to the following: • Cosmetic damage, physical damage to the surface of the product, including, without limitation, breakage, cracks, dents, scratches or adhesive marks on the LCD screen or outside casing of the Product.
SX66 User Manual • Loss of data. • Testing and examination discloses that the alleged defect or malfunction in the Product does not exist. This warranty does not cover customer education, instruction, installation or removal, set up adjustments, problems related to service(s) provided by a carrier or other service provider, and/or signal reception problems. • This warranty is valid only in Canada and the United States.
SX66 User Manual 31 TO PROVIDE SUPPORT SERVICES. ALSO, THERE IS NO WARRANTY OR CONDITION OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, CORRESPONDENCE TO DESCRIPTION OR NON-INFRINGEMENT WITH REGARD TO THE PRODUCT. Some states or provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above exclusions or limitations may not apply to you (applies only in the U.S. and Canada).
SX66 User Manual ABOVE AND ALL DIRECT OR GENERAL DAMAGES), THE ENTIRE LIABILITY OF SIEMENS, SELLER AND ANY OF THEIR SUPPLIERS UNDER ANY PROVISION OF THIS LIMITRED WARRANTY AND YOUR EXCLUSIVE REMEDY FOR ALL OF THE FOREGOING (EXCEPT FOR ANY REMEDY OF REPAIR OR REPLACEMENT ELECTED BY SIEMENS OR SELLER WITH RESPECT TO ANY BREACH OF THE LIMITED WARRANTY) SHALL BE LIMITED TO THE GREATER OF THE AMOUNT ACTUALLY PAID BY YOU FOR THE PRODUCT OR U.S. $5.00.
SX66 User Manual 33 Desktop Software Desktop software Licensor licensed form Microsoft Licensing Inc. or its Affiliates is included with Your phone, and You may install and use the Microsoft®ActiveSync® 3.5 component on one (10) or more computers to exchange information with one (1) or more computing devices that contain a compatible version of the Microsoft® Pocket PC Software 2002 operating system.
SX66 User Manual Your computer by downloading such revocation lists. Secure Content Owners may also require You to upgrade some of the DRM components in this SOFTWARE (“DRM Upgrades”) before accessing their content. When You attempt to play such content, MS DRM Software will notify You that a DRM Upgrade is required and then ask for Your consent before the DRM Upgrade is downloaded. Third party DRM Software may do the same.
SX66 User Manual 35 4. Copyright. Licensor and/or its software suppliers and their respective affiliates own the Software and all rights, including without limitation including proprietary rights therein, are protected by international treaty provisions and other applicable national laws of the country in which it is being used. The structure, organization and code of the Software are the valuable trade secrets and confidential information. 5. Multiple copies/updates.
SX66 User Manual 9. Limitation of liability.
SX66 User Manual 37 Companion CD If any Software component(s) is provided separate from the phone on CD ROM disk(s) or via web download or other means, and labeled “For Upgrade Purposes Only”, You may (i) install and use one (1) copy of such component(s) on the computer(s) You use to exchange data with the phone as a replacement copy for the existing Companion CD component(s). 12. Notice Regarding the MPEG-4 Visual Standard. The Software may include MPEG-4 visual decoding technology. MPEG LA, L.L.C.
Chapter 1 Getting Started 1.1 Knowing Your Device 1.2 Battery 1.
SX66 User Manual 39 1.1 Knowing Your Device Top View, Left-Side View, and Front View Power Button/ Backlight MMC/SD Cards or SDIO Accessories Slot Press to turn ON/OFF your SX66 or Backlight. Insert a MMC/SD card or a SDIO accessory here. Earphone Plug Plug the headset here. Contacts Press for quick access to Contacts. Speaker Listen to audio files or a phone call from here. Record Calendar Press to record a voice note or to launch voice commander.
SX66 User Manual Right-Side View, Back View, and Bottom View Car Antenna Connector You can connect your phone to a car antenna to utilize the superior reception quality. Stylus and Stylus Slot Notification LEDs On the right: GSM standby, message, GSM network status, PDA notification, and battery charge status. On the left: Bluetooth, Wi-Fi, power notification, and RF signal status. Battery Lock/Unlock Latch Pull the latch to release battery. Soft Reset Use the stylus to reset your device.
SX66 User Manual 1.2 Battery Your SX66 contains a rechargeable Li-ion polymer battery. Battery power depends on whether you are talking on the phone, using the PDA, or if the device is on standby. Battery life estimates: n Talk-time: 3 - 4 hrs. n PDA: 15 hrs (approximate.). n Standby: 168 hrs (approximate.). n Data retention time: 72 hrs. The above are based on using one function at a time. Battery life may vary with switching between functions.
SX66 User Manual Recharging your device You can recharge your device in the following ways: 1. 2. Place your SX66 in the cradle and connect it to an external power source with the travel charger. Before using your SX66 for the first time, charge the battery for at least 8 hours. Place it in the cradle for a short time each day to recharge the battery to its full capacity. Connect the travel charger into the optional USB cable plug. Connect your SX66 directly to an external power source.
SX66 User Manual 43 When the battery is low When the low-battery warning message appears, immediately save any data you are working on, perform a synchronization with your PC, and turn off your SX66. If your device shuts down, the internal backup battery will protect the data for about 20 minutes. 1.3 Accessories USB Sync Station Your SX66 comes with a USB Sync Station.
SX66 User Manual Chapter 2 Knowing Your Phone 2.1 Starting Up 2.2 Entering Information 2.3 Writing on the Screen 2.4 Drawing on the Screen 2.5 Recording a Message 2.
SX66 User Manual 45 2.1 Starting Up Screen tapping and calibration When you first start up your SX66, you will be asked to calibrate the screen by tapping the center of a cross with your stylus as it moves around the screen. This process ensures that when you tap the screen with your stylus, the tapped item is activated. Re-calibrate the screen If your device does not accurately respond to screen taps, you will need to re-calibrate it: 1. Tap the Start menu > Settings > the System tab > Screen. 2.
SX66 User Manual The Today screen The Today screen displays important information such as today’s appointments and status icons for your device. 6 Tap the information listed on the Today screen to open the programs associated with the information. 7 1. Tap to bring up a menu list of programs. 2. Tap to view call status information. 1 2 3 4 8 3. Tap to view network status and options. 4. Tap to change volume or mute all sounds. 5. Tap and hold to change time format. 6. Tap to change date and time.
SX66 User Manual 47 One or more E-mail or SMS messages were received. Network status is on. The Bars indicate the strength of the connection. Indicates that more notification icons need to be displayed. Tap the icon to view all. Indicates that your device has WLAN connection. Indicates that your device is syncing with a PC. Notifications Your device reminds you in a variety of ways when you have something to do or when you have received an SMS message.
SX66 User Manual 1. Tap to switch to a program. 2. Tap to switch to a recently used program. 3. Tap to see more programs. 1 4. Tap to change device settings. 5. Tap to see a Help topic for the current screen. 2 3 4 5 Command bar Use the command bar at the bottom of the screen to perform tasks in programs. The command bar includes menu names, buttons, and the Input Panel button. 1. To create a new item in the current program, tap New. 1 2 3 2. Tap to select menu commands. 3.
SX66 User Manual 49 The following contains a partial list of programs on your device. Look on the SX66 Companion CD for additional programs that you can install onto your device. ActiveSync synchronizes information between your device and PC. Calendar keeps track of your appointments and creates meeting requests. Contacts keeps track of your friends and colleagues. Messaging sends and receives E-mail/SMS messages. Internet Explorer browses Web sites and downloads new programs and files from the Internet.
SX66 User Manual WLAN Manager allows you to manage the WiFi connection. Wireless Modem uses your SX66 as an external modem for a PC. SIM Manager collects, organizes, and sorts the Contacts list stored on your SIM card. xBackup backs up your SX66 files. MIDlet Manager installs, runs and deletes Java MIDlets. Xpress Mail provides secure access to various applications. 2.
SX66 User Manual Press twice to type a serial of numbers symbols. Tap to change input panel options Using the Soft Keyboard To show or hide the input panel, tap the Input Panel button . To see your choices, tap the arrow next to the Input Panel button. Tap the arrow next to the Input Panel button Keyboard. Tap to select an input panel Tap to see the list of input panels Tap to open the selected input panel , and then To type lowercase letters, tap the keys with the stylus.
SX66 User Manual Using the Letter Recognizer With the Letter Recognizer, you can write letters using the stylus just as you would on paper. 1. Tap the arrow next to the Input Panel button then Letter Recognizer. , and 2. Write a letter in the box. When you write a letter, it is converted to typed text that appears on the screen. For specific instructions on using Letter Recognizer, with Letter Recognizer open, tap the question mark next to the writing area.
SX66 User Manual scriber open, and tap the question mark in the lower righthand corner of the screen. To punctuate in Transcriber: 1. Tap the keyboard button on the tool bar. 2. Tap the desired punctuation. 3. Tap the keyboard button keyboard. again to hide the To learn writing in Transcriber: 1. Tap on the tool bar. 2. A Letter Shapes Selector screen will appear: n At the bottom of the screen, select the character you wish to explore. n At the top of the screen, tap the picture of this character.
SX66 User Manual To select typed text, drag the stylus across the text you want to select. You can cut, copy, and paste text by tapping and holding the selected words, and then tapping an editing command on the pop-up menu, or by tapping the command on the Edit menu. 2.3 Writing on the Screen In any program that accepts writing, such as Notes, and in the Notes tab in Calendar, Contacts, and Tasks, you can use your stylus to write directly on the screen. Write as you would on paper.
SX66 User Manual Converting writing into text: 1. On the writing note, tap Tools and Recognize from the menu bar. 2. If you want to convert only certain words, select them before tapping Recognize on the Tools menu (or tap and hold the selected words and then tap Recognize on the pop up menu). If a word is not recognized, it will be left as writing. And if the conversion is incorrect, you can select different words from a list of alternates, or return to the original writing.
SX66 User Manual 2.4 Drawing on the Screen You can draw on the screen in the same way that you write on the screen. The difference between writing and drawing on the screen is how you select items and how they can be edited. For example, selected drawings can be re-sized, while writing cannot. To create a drawing: Cross three ruled lines on your first stroke. A drawing box appears. Subsequent strokes in, or touching, the drawing box become part of the drawing.
SX66 User Manual 57 2.5 Recording a Message In any program where you can write or draw on the screen, you can also quickly capture thoughts, reminders, and phone numbers by recording a message. In Calendar, Tasks, and Contacts, you can include a recording in the Notes tab. In the Notes program, you can either create a stand-alone recording or include a recording in a written note. If you want to include the recording in a note, open the note first.
SX66 User Manual Change recording formats In the note list, tap Tools > Options > the Global Input Options link (at the bottom of the page). Mobile Voice is a 2.4 KB audio codec (compressor/decompressor). It is the recommended format because it provides good voice recording and takes up far less storage space than PCM. Pulse Code Modulation (PCM) provides slightly better sound quality. However, PCM recordings may take up to 50 times more storage space than Mobile Voice recordings.
SX66 User Manual 59
Chapter 3 Using Your SX66 3.1 About Your Phone 3.2 Making a Call 3.3 Receiving a Call 3.4 In-Call Options 3.5 Contacts Information 3.6 Photo Contacts 3.7 Additional Dialing Information 3.
SX66 User Manual 61 3.1 About Your Phone Like a standard mobile phone, you can use your SX66 to keep track of calls and send SMS messages. You can also take notes while talking, dialing directly from Microsoft Contacts, and easily transfer contacts between your SIM card and the RAM of your device. The phone dialer screen To access the Phone Dialer Screen, tap the Start menu > Phone, or press on your SX66. From this screen, you can access Call History, Speed Dial, and Phone Setting.
SX66 User Manual The navigation pad and dialing 2 1 3 7 4 6 5 1. Phone Dialer Screen: Press to activate the Phone Dialer Screen. 1. Take Call: Press to take an incoming call. 1. Speakerphone: During a call, press and hold to turn the speakerphone ON or OFF. 1. Dial: Press to dial a phone number. 2. Scroll Up: Press to scroll up through a list, or enter Call history. 3. End Call: Press to end a call or to end a GPRS connection. 4.
SX66 User Manual Checking your connection By default, your SX66 will automatically connect to your service provider’s network once you have inserted a SIM card and entered the required PIN code. The icon indicates that you are connected to your service provider's network. A full strength signal is indicated by . As the strength of the signal diminishes, so will the number of vertical bars in the icon, with no bars indicating no signal.
SX66 User Manual To adjust the conversation phone volume, you must do it during a call. Adjusting the volume at another time will affect the ring, notification, and MP3 sound levels. 3.2 Making a Call With your SX66, you can make a call from the Dialer, Contacts, Speed Dial, Call History, and SIM Manager. Making a call from the Dialer The most direct method is by using the Phone keypad. 1. Press to bring up the dialer screen. 2. Tap the number on the keypad, then tap press or .
SX66 User Manual A pop-up number right after pressing the will call the Work Tel by default. However, you can customize it so that the mobile number or E-mail is displayed instead. 65 Tap the w here to pop-up all the phone n In the Contacts list, tap the w in the right column next numbers and E-mails for this contact to the contact you want to customize. A pop-up menu will display the phone numbers and E-mail addresses for this contact with a dot next to the priority number.
SX66 User Manual 3. In the Location field, tap the Up/Down arrows to select an available location to assign as the new Speed Dial entry. (The first Speed Dial location is reserved for your voice mail). By memorizing the position in the Speed Dial list of a number, you can dial the number by entering its position number. By default the Location function will give you the next available position in the Speed Dial setting screen.
SX66 User Manual 67 3.3 Receiving a call Answering an incoming call When you receive a phone call, a message will appear, giving you an option to either answer or ignore the incoming call. 1. Tap Answer, or press . 2. Tap Ignore or press to silence the phone and reject the call. This may route the call to your voice mail, depending on your service provider. Ending a call Once an incoming or outgoing call is in progress, you can press the Dialer screen to hang up. , or tap on 3.
SX66 User Manual Setting up conference calls: 1. Either put a call on hold, dial a 2nd number and wait for it to be picked up. Or, accept a 2nd incoming call when you already have one in progress. 2. In the screen that appears tap . 3. If the conference connection is successful, the word Conference will appear at the top of the Phone Dialer screen. 4. To add additional people to your conference call, tap then tap to return and continue.
SX66 User Manual 69 1. Wait until the phone is ringing. 2. Hold down bar. until the speakerphone comes ON and the icon 3. To turn OFF the speakerphone hold down appears in the status again. WARNING: To avoid damage to your hearing, do not leave your SX66 on speakerphone mode and hold it against your ear. Muting a call You can mute your microphone during a call so that you can hear the caller without being heard. From the Phone Dialer keypad, tap to mute or un-mute a call. 3.
SX66 User Manual 2. After the SIM contents have loaded, tap New. 3. Fill in the Name and Phone details, tap Add. Transferring contacts from SIM to Microsoft Contacts: On SIM Manager, tap Tools > Select All > Save to Contacts. Press and hold the center of the navigation pad when a contact has been selected, or tap and hold a contact from the list. Select Save to Contacts from the pop-up menu. Saving your own numbers You can choose to save your personal phone numbers in a separate screen in SIM Manager.
SX66 User Manual 71 Viewing calls details Tap in the top left corner of the screen and then select a category from the drop down menu. Calls are categorized as follows: n All Calls: Displays all calls made to and from the phone in chronological order. n Missed : Displays calls that were not answered. n Outgoing : Displays calls made from the phone. n Incoming : Displays calls made to the phone. n By Caller: List calls alphabetically by caller.
SX66 User Manual 3.6 Photo Contacts Photo Contacts make your SX66 more fun and practical. It allows you to assign still or animated photos to the entries in your Contacts. When a person calls you (for whom you have previously assigned a photo in Photo Contacts), that photo will appear on your SX66’s incoming call screen. Use the rich set of features to get the photos displayed with the size, position, and animated template you want. Creating a new photo contact: 1.
SX66 User Manual 73 Toolbar Icons The Toolbar provides a convenient way for you to select frequently-used commands. From left to right, the functions of the icons on the Toolbar are: n Create a new Contact entry (same as New... on the Edit Menu). n Modify data for the selected Contact entry (same as Edit... on the Edit Menu). n Delete the selected Contact entry (same as Delete on the Edit Menu). n Assign a Photo ID to a Contact entry (same as Assign Photo... on the Edit Menu).
SX66 User Manual To disable the display of photos during incoming calls: 1. Tap the Start menu > Programs > Photo Contacts. 2. Tap Tools > Options. Uncheck the Display photo during incoming or waiting call box. (Photo ID for each contact will still display in the Contacts list). To manage your groups You can create a new group, rename, delete, and assign and unassign a photo to a group by tapping Tools > Manage group. To assign a contact to a group: 1. Tap the Start menu > Programs > Photo Contacts.
SX66 User Manual 75 Not-found photo This option in the Set Default Photos screen lets you assign a generic Photo ID to any incoming call from a person whose number is not found in your Contacts. That is, the phone number of the incoming call is known, but has no matching entry in your Contacts.
SX66 User Manual 3.8 Securing Your Phone You can customize the level of security you want to have on your SX66 by locking the keypad, the entire device, or the SIM card. Locking the keypad The keypad lock turns off the keypad functionality. This is a helpful feature if, for example, your SX66 is turned off and in your pocket, and you want to prevent accidental keypress. 1. Tap the Start menu > Settings > System tab > Button Lock. 2. Select Lock all buttons except Power button. 3.
SX66 User Manual 77
Chapter 4 Synchronizing Information 4.1 Using ActiveSync 4.2 Synchronizing Information 4.3 Infrared and Bluetooth Connection 4.
SX66 User Manual 79 4.1 Using ActiveSync With Microsoft ActiveSync on both your PC and your SX66, you can exchange information between a PC or server and your SX66. This process is called "synchronization." To synchronize your SX66 with your PC, you must install ActiveSync on the PC. Using ActiveSync, you can: n Synchronize information between your SX66 and PC or server so that you have the latest information in all locations. n Change synchronization settings and synchronization schedule.
SX66 User Manual Connecting to a PC by Infrared You can use an infrared connection to create a direct connection between your SX66 and another IR-enabled mobile device or PC quickly. This method is ideal for quickly switching between multiple devices since there are no cables or adapters to change. When creating a partnership, you must connect using infrared, a cable, or a cradle connection. 1. Set up an infrared connection.
SX66 User Manual Mobile Information Server 2002 or later. By default, you’ll receive messages from the last three days only, the first 100 lines of each new message, and file attachments of less than 100 KB in size. n Messages in the Outbox folder on your device are transferred to Exchange or Outlook and then sent from those programs. n The messages on the two computers are linked. When you delete a message on your device, it’s deleted from your PC the next time you synchronize.
SX66 User Manual Synchronizing Tasks n Tasks stored on your device can be synchronized with Outlook on your PC. Task synchronization is automatically selected in ActiveSync. n New items entered on one computer are copied to the other during synchronization. Handwritten notes and drawings are saved as metafiles (pictures). For more information on synchronization, see ActiveSync Help on the PC.
SX66 User Manual 83 By default your device detects incoming infrared (IR) and Bluetooth beams and prompts you to accept them. If you do not want your SX66 to detect or receive beams, clear the Receive all incoming beams check box. NOTE: If someone attempts to send you an IR beam from an older device, you may not be prompted to accept it. In this case, before the beam is sent from the other device, tap Receive an infrared beam at the bottom of the Beam screen. Bluetooth: 1.
Chapter 5 Personalizing Your Phone 5.1 Device Settings 5.
SX66 User Manual 85 5.1 Device Settings You can adjust the device settings to suit the way you work. To see available options, tap the Start menu > Settings > the Personal tab or System tab located at the bottom of the screen. The Personal tab Buttons assigns an application program to a hardware button. Input sets up the input portion of your device. Menus customizes the menu appearance and enables a pop-up menu from the New button. Owner Information displays your contact information.
SX66 User Manual Keyboard customizes the keyboard settings to switch the device backlight mode. Memory displays the memory allocation status and current running programs. Microphone AG adjusts the volume automatically when you are recording. Permanent Save saves Contacts to the permanent flash memory. Power maximizes battery life. Regional Settings customizes the display format for geographic locations. Remove Programs creates more memory by removing programs.
SX66 User Manual 87 Input: 1. Tap the Start menu > Settings > the Personal tab > Input. 2. On the Input Method tab, select an input method and change desired options. On the Word Completion tab, select the desired settings for word completion. On the Options tab, select the desired options for writing and recording. These options apply to any program on the device where you can record or write. These options do not apply to text you enter using the input panel.
SX66 User Manual Password A strong password must have at least 7 characters that are a combination of uppercase and lowercase letters, numerals, and punctuation. 1. Tap the Start menu > Settings > the Personal tab > Password. 2. To enable this function, select how long your mobile device must be turned off before the password is required for using the device by tapping Prompt if device unused for. 3. Select the type of password you would like to use: Simple 4 digit or Strong alphanumeric. 4.
SX66 User Manual NOTE: The recommend picture size for the background is 240x320 pixels in jpeg file format. To beam a favorite theme to a friend, select the desired theme, and tap Beam on the Appearance tab Customizing the displayed information: 1. Tap the Start menu > Settings > the Personal tab > Today > the Items tab. 2. Select the information you want displayed on the Today screen. 3.
SX66 User Manual Clock & Alarms: Tap the Start menu > Settings > the System tab > Clock & Alarms. n If you visit a particular time zone often, select it as your Visiting time zone on the Time tab so that you can quickly see the correct date and time. n You can use your device as a travel alarm clock by setting a wake-up alarm on the Alarms tab. Tap the alarm icon to select the type of alarm you want.
SX66 User Manual 91 Permanent Save You can choose to back up Contacts and Appointments, Tasks, and Connection Setting to non-volatile memory. Backing them up in this way means they will not be lost in the event your device loses all power and you have to perform a full reset. To back up to FlashROM: 1. Tap the Start menu > Settings > the System tab > Permanent Save. 2. Select the desired item by checking the boxes. Tap OK.
SX66 User Manual 5.2 Phone Settings You can easily view and change settings, such as the ring type and ring tone to be used for incoming calls, and the keypad tone to be used when entering phone numbers. You can also protect your phone from unauthorized use. There are two ways to change phone settings: n Tap the Start menu > Settings > the Personal tab > Phone. n To change the phone settings from the Phone keypad, tap Tools > Options.
SX66 User Manual 93 Keypad tone You can change the tone you hear when entering a phone number on the keypad. If set to Tones, the tone is heard continuously for as long as the number on the keypad is pressed. If set to Beep, the tone is heard only for one or two seconds. 1. Tap the Keypad list, then select the option you want. 2. To prevent tones from being heard when entering a phone number, select Off.
Chapter 6 Getting Connected 6.1 About Connections 6.2 Connecting to the Internet 6.3 CSD Line Type 6.4 Internet Explorer 6.5 Wireless Manager 6.6 WiFi Manager 6.7 Network Cards Settings 6.8 Terminal Services Client 6.9 Bluetooth 6.
SX66 Phone User Manual 6.1 About Connections This device is equipped with powerful networking functions that allow you to connect to the Internet through a GPRS network, a built-in WiFi (Wireless LAN) module, or a Bluetooth modem. You can also use an external modem with this device to access the Internet. You can set up connections to the Internet and to a corporate network at work to browse the Internet, send and receive E-mail, use instant messages, and synchronize with ActiveSync.
SX66 Phone User Manual 2. Tap the Start menu > Settings > the Connections tab > Connections > Connections. 3. To create a new connection in My ISP, tap Add a new modem connection, and follow the instructions in the Make New Connection wizard. 4. Wireless connections can be made via a mobile phone network or GPRS. If you are using a mobile phone network to connect, tap Cellular Line in the Select a modem list. If you are using GPRS, tap Cellular Line (GPRS).
SX66 Phone User Manual 97 NOTE: The default setting on your SX66 Phone is set for the most optimal use. Do not change this setting unless you have trouble using the circuit switch data connection. GPRS Settings This program allow you to choose the GPRS setting method when you make a GPRS connection.
SX66 Phone User Manual 1. In the address bar that appears at the top of the screen, enter the Web address you want to connect to. Tap 1 the down arrow to choose from previously entered addresses. 2. Tap 3. Tap 2 to go to the web address you entered. to go back to the previous page. 4. Tap to refresh the web page on the screen. 5. Tap to go back to the Home page. 6. Tap (the Favorites button), then tap the favorite address you want to view.
SX66 Phone User Manual 99 Enabling/Disabling Wireless connection: n Wireless Manager: Tap a button to enable or disable a wireless channel. Or, tap on the specific wireless icons located at the bottom of the screen to enable or disable connections. NOTE: Tapping on Bluetooth indicator will not turn off Bluetooth. Instead, the Bluetooth Internet connection via a Bluetooth access point will be disconnected.
SX66 Phone User Manual 6.6 WiFi Manager WiFi Manager allows you to conveniently manage WiFi Internet connections on your SX66 phone. You can manage the network setting and configure the device’s power save mode to make optimal use of the battery under the WiFi networking environment. WiFi Manager is designed to work with the existing 802.11b devices such as access points or routers.
SX66 Phone User Manual 1. Tap the Start menu > Settings > the Connections tab > WiFi. 2. On the Main tab, select the Wireless LAN ON check box to turn the WiFi on. When your WiFi is powered on, the LED indicator for Wireless LAN, located on the left upper corner of your device, will blink green for every 6 seconds to indicate WiFi is on, or alternate between blinking green and blinking blue for every 3 seconds if Bluetooth is also turned on.
SX66 Phone User Manual 2. Tap the Settings tab, select the Auto turn off WiFi if not connected box, choose between 2,3,4, or 5 minutes intervals. Activating LEAP The LEAP (Lightweight Extensible Authentication Protocol) section of the application allows you to increase the security of your device by setting the SSID, username, password, and domain to ensure that no one can access your network without your permission. Most 802.
SX66 Phone User Manual 103 (This is set by default)You should only check this option if it is supported by your network environment. Check with your network administrator if you are unsure. To search for a network to access: Networks that you have already configured are listed in Wireless Networks. You can choose whether to connect only to preferred networks or to have your SX66 Phone search for and connect to any available network. 1.
SX66 Phone User Manual Connecting to a Terminal Server Start a remote connection to the server via a GPRS or Wireless LAN connection: 1. Tap the Start menu > Programs > Terminal Services Client. 2. To connect to a server you have previously connected to, in Recent Servers, tap a server. To connect to a new server, enter the server’s name in the Server box.
SX66 Phone User Manual 105 Disconnecting and ending a session: 1. In the Terminal Services Client window, tap Start > Shutdown. 2. Tap Log Off. 6.9 Bluetooth Bluetooth is a short-range wireless communications technology. Unlike infrared, you don't need to line up the devices to beam information within a closer range when operating with a Bluetooth connection.
SX66 Phone User Manual Bluetooth Settings With Bluetooth Settings, you can: n Turn Bluetooth on/off and enable/disable Bluetooth services. n Create or Change a name for your SX66 Phone when using Bluetooth to connect with other devices. n Set your connection preferences and user profile. n Specify security settings and define settings for sharing and connecting. Turning On Bluetooth In the lower right corner of the Today Screen, tap to open the menu. Select Turn Bluetooth ON.
SX66 Phone User Manual 107 Creating a new profile: 1. In the General tab, tap profile. to access a screen in which you can Add, Rename, or Delete a 2. Tap the New button. 3. Enter a descriptive name for the new profile, for example, Office. 4. Select an existing profile on which to base the new profile. 5. Tap OK. The new profile does NOT automatically become the active profile; to activate the new profile, select it from the Current Profile field in the General tab. Renaming or deleting a profile: 1.
SX66 Phone User Manual Setting Accessibility Properties You can enter or change the accessibility properties to define how your SX66 Phone interacts with other Bluetooth devices by tapping the Bluetooth icon on the lower-right corner of the Today screen > Bluetooth Settings > the Accessibility tab. 1. Enter the Bluetooth name of your SX66 Phone, as displayed to remote devices when the associated profile is active if the Use SX66 device name for Bluetooth checkbox is un-checked. 2.
SX66 Phone User Manual 109 n Information Exchange: Send the default business card (Pocket Outlook contact) on request. n Serial Port: Bluetooth serial port operations. Bluetooth serial ports are used as a replacement for a physical cable between devices. n Personal Network Server: Join or host a Bluetooth-based personal area network. n Dial-up Networking: Provide access, via a phone line or other access system, to a remote computer network such as an Internet service.
SX66 Phone User Manual 1 2 3 4 1. Authorization required: When enabled, your SX66 Phone will require that each attempt to establish a connection be individually authorized on the pop-up Authorization Request screen; that is, you must authorize each connection, when a remote device attempts to connect to this service. 2. Authentication (Passkey) required: When enabled, a passkey or a Link Key is required from the remote device before allowing the connection.
SX66 Phone User Manual 111 Exchanging Information or Business Cards To exchange information or business cards choose either Paired devices or Business Card Exchange. Tap the Bluetooth icon on the lower-right corner of Today screen > Bluetooth Manager > Tools. Pairing with another device: Pairing essentially means giving two devices permission to communicate with each other. When two devices are paired, they share, and exchange prior to each connection, an internally generated security key.
SX66 Phone User Manual establishing the parameters of the connection. The exact content of the succeeding screen will vary, depending on the type of connection being created. Tap Next to move to the next page, or Back to return to the previous page. Some of the connection types included in the wizard can help you perform are: n Hands-free/Headset setup: Locate and pair with a Bluetooth headset or other handsfree devices.
SX66 Phone User Manual 113 To determine the communications port assigned to the Bluetooth serial port: 1. Tap the Bluetooth icon in the lower-right corner of the Today screen > Bluetooth Settings > the Services tab. 2. Select Serial Port from the services area, and then tap Advanced. 3. The Outbound COM Port is the lower listing on the screen. You must configure the application that will use the Bluetooth Serial Port to send data to this port.
SX66 Phone User Manual your PC is the same as the COM port setting used for Bluetooth on your PC. 4. Follow the Bluetooth Browser screen, select the PC you want to synchronize with, tap Next. 5. Under Serial Port Selection, select the name of the serial port for the PC selected above, tap Next, and Finish. Connecting to a remote PC Dial-up Networking (DUN) allows you to connect to a remote computer via a phone line. Once connected, you can browse the Internet or check your E-mail.
SX66 Phone User Manual 115 Send via Bluetooth Pocket Outlook Contacts, Calendar items, and Tasks can be sent individually or collectively to a remote device. To send data via Bluetooth transfer: 1. Tap the Start menu > Programs. Then, open Calendar, Contacts or Tasks. 2. Highlight the item(s) to be sent. 3. Tap-and-hold the item(s), and in the pop-up menu, tap Send via Bluetooth. 4. On the Select a Bluetooth device screen, tap the name of the destination device, and then tap OK.
SX66 Phone User Manual 2. On the next wizard screen select Join a personal network > Next. When Bluetooth Browser appears, select the host of the personal area network, and then tap Next to establish a connection to the personal area network. If asked to enter IP network settings, select Use server-assigned IP address, and then tap OK. The network host’s authorization and authentication settings, and/or its Personal Area Network service availability may prevent you from joining the network.
SX66 Phone User Manual 117 Settings on your PC Contact your ISP to get the APN (Access Point Name). Before you start using your Wireless Modem with a serial port or IrDA connection, you need to create a new modem on your PC first: 1. Click Start > Settings > Control Panel > Phone and Modem Options. 2. Add a new modem by selecting the Modem tab. 3. Enable the checkbox Don't detect my modem; I will select it from a list. 4.
SX66 Phone User Manual Settings on your SX66 Phone You need to complete these actions before you start using the Wireless Modem on your SX66 Phone: n A GPRS SIM card is inserted in your SX66 Phone. n Disable the ActiveSync com port connection of your PC. n Disable the Infrared function by tapping the Start menu > Settings > the Connections tab > Beam. Uncheck Receive all incoming beams. n Insert your SX66 Phone to your PC/Notebook by Serial connection (using the optional serial sync cable). 1.
SX66 Phone User Manual 119 5. Select the Display a list of the known drivers for this device so that I can choose a specific driver option, and then click Next. 6. Select Modem from the Hardware types list, and then Next. 7. Click the Have Disk button, and then Next. 8. Select the recognized USB Modem in the Models list, and then Next. After the installation is completed, select Finish. 9.
Chapter 7 Using Microsoft Outlook 7.1 Calendar 7.2 Contacts 7.3 Tasks 7.
SX66 User Manual 121 7.1 Calendar Use Calendar to schedule appointments, including meetings and other events. You can check your appointments in one of several views (Day, Week, Month, and Agenda) and set Calendar to remind you of appointments with a sound or other method. Appointments for the day can be displayed on the Today screen. If you use Outlook on your PC, you can synchronize appointments between your SX66 and PC. See Using ActiveSync in Chapter 4. 1 3 2 4 1.
SX66 User Manual When entering a time, you can type military and abbreviated time forms, such as 2300 (becomes 11:00 PM), 913pm (becomes 9:13 PM), 911 (becomes 9:11 AM), and 9p (becomes 9:00 PM). Send a meeting request You can use Calendar to set up meetings with users of Outlook or Pocket Outlook. The meeting request will be created automatically and sent either when you synchronize Inbox or when you connect to your E-mail server. 1. Create an appointment and enter the meeting information. 2.
SX66 User Manual 123 Set a reminder for an appointment: 1. In the Calendar, tap the appointment, and then tap the upper portion of the summary screen when editing the appointment. 2. Tap Reminder and select Remind me. 3. To change how many minutes before the appointment you are to be reminded, tap the minutes displayed. To automatically set a reminder for all new appointments, in the calendar, tap the Tools > Options > the Appointments tab > Set reminders for new items.
SX66 User Manual Create or change a contact: 1. Tap the Start menu > Programs > Contacts > New. 2. Using the input panel, enter a name and other contact information. You will need to scroll down to see all available fields. 3. To assign the contact to a category, scroll to and tap Categories and select a category from the list. In the contact list, you can display contacts by category. 4. To add notes, tap the Notes tab. You can enter text, draw, or create a recording. 5.
SX66 User Manual 125 When using infrared (IR), align the IR ports between the devices so that they are unobstructed and within close range. Change options: 1. In the contact list, tap Tools > Options. 2. To increase the available space for displaying contacts in the list, clear Show ABC tabs. 3. The area code and country/region for new contacts are automatically entered based on the information in Country/Region settings.
SX66 User Manual Set a reminder for a task: 1. In the task list, tap the task, and then tap Edit. 2. Tap the Due field and set a due date if you have not already done so. 3. Tap the Reminder field and select Remind me. You will be reminded at 8:00 in the morning on the due date. 4. To change the reminder date, tap the date displayed. To be automatically reminded of new tasks with a due date, in the task list, tap Tools > Options and select Set reminders for new items.
SX66 User Manual 127 Create a note: 1. Tap the Start menu > Programs > Notes > New. 2. Create your note by writing, drawing, typing, and recording, see Entering Information in Chapter 2 for more information about using the input panel, writing and drawing on the screen, and creating recordings. You can insert the date in a note. First, deselect and make sure that no drawings are selected. Next, tap and hold anywhere on the note and then tap Insert Date. Send a note by E-mail: 1.
Chapter 8 Messaging Features 8.1 E-Mail and Text Messages 8.2 MSN Messenger 8.
SX66 User Manual 129 8.1 E-Mail and Text Messages You can receive E-mail and text messages in Messaging. E-mail messages are sent by using an address you receive from your Internet service provider (ISP), an E-mail service provider, or your employer. Text messages are sent and received through your phone service provider by using a phone number as the message address.
SX66 User Manual 4. Select the appropriate Account type that your E-mail provider supports (POP3 or IMAP4). Enter a Name for your E-mail account, then tap Next. 5. Enter your E-mail provider’s server name information for Incoming mail and Outgoing mail, then tap Finish. When finished, tap Accounts. Your new E-mail account will be displayed under this menu. You can start connecting to your E-mail server at this point.
SX66 User Manual 131 Receiving attachments An attachment sent with an E-mail message or downloaded from the server appears as an icon at the bottom of the message in its own window pane. Tapping the attachment icon opens the attachment if it has been fully downloaded. You can mark an attachment for downloading (IMAP4 account only) the next time you connect. Through synchronization: 1. Start ActiveSync on your PC. 2. Click File > Mobile Device > and then select your mobile device. 3.
SX66 User Manual You can also send a text message from the Phone Dialer Screen by tapping Tools > Send Text Message. A new message screen will appear in Messaging. 1. In the message list, tap Accounts and select Outlook E-Mail, Text Messages (SMS), or the desired E-mail account. 2. Tap New. 3. Enter the E-mail address or text message address of one or more recipients, separating them with a semicolon. To access addresses and phone numbers from Contacts, tap To. or tap the Address Book button. 4.
SX66 User Manual 133 For all accounts except Outlook E-Mail, you can access folder options by tapping Tools > Manage Folders. 8.2 MSN Messenger MSN Messenger features include: n Seeing who is online. n Sending and receiving instant messages. n Having instant message conversations with groups of contacts. n Notifying contacts of your on-line status. n Blocking contacts from seeing your status or sending you messages.
SX66 User Manual Signing In and Signing Out 1. To sign in, tap anywhere on the screen. Follow the directions on the screen. 2. To sign out, tap Tools > Sign out. To sign in as your device is connected to the Internet, tap Tools > Options > the General tab > and select the Run this program upon connection box. Signing in to an Exchange account may take several minutes depending upon your connection speed. Reducing the number of Exchange contacts will decrease your sign-in time. 8.
SX66 User Manual 135 2 1 3 4 5 1. When you’re ready to send your message, tap here. 2. Here you can enter your recipients and subject. Tap the double down arrow to view the Cc and Bcc fields, and message size. 3. Tap here to insert a photo or video. 4. Tap here to input a text message. 5. Tap here to include an audio clip. Adding a photo or a video clip You can add either a still image or a video clip to each individual slide.
SX66 User Manual Adding text You can add text to any slide. You can either enter in new text with the keyboard, or use “canned” text. Canned text are previously saved words or phrases. Tap the Canned Text icon to see a list of pre-saved text messages. Tap the one you want, and then choose “Select.” Tap and hold on the Canned Text screen to view these additional options: n New: Lets you enter in a new canned text message. n Edit: Lets you modify an existing canned text message.
SX66 User Manual 137 n Options Text: Choose between “Top” and “Bottom.” This determines where your included text will appear in the message. Preview your message to see which looks best. Send Options: • Uncheck the “Send the message now” box to manually set the date and time that you would like the message sent. • From the “Expiration” pull-down, select how long you’d like the message to be stored on the server. The server will stop attempting to deliver the message after the set time expires.
Chapter 9 Applications 9.1 Pocket Word 9.2 Pocket Excel 9.3 Windows Media Player 9.4 Pictures 9.
SX66 User Manual 139 9.1 Pocket Word You can create and edit documents and templates in Microsoft Pocket Word just as you would do in Microsoft Word on your PC. Pocket Word documents can be saved as .psw, .doc, .rtf, or .txt files. You can enter information in a document by typing, writing, drawing, or recording. After you close a document and name it, the document is automatically placed in the Pocket Word document list.
SX66 User Manual 9.2 Pocket Excel You can create and edit workbooks and templates in Microsoft Pocket Excel just as you would do in Microsoft Excel on your PC. Pocket Excel workbooks are usually saved as .pxl files, but you can also save them in the .xls format. When you close a workbook, it is automatically named and placed in the Pocket Excel workbook list. You can attach a password to a workbook to ensure privacy.
SX66 User Manual 141 9.3 Windows Media Player Use Microsoft Windows Media Player to play audio and video files that are stored on your SX66, a network, or the Internet. You can play files in either Windows Media or MP3 format (this includes files with the extensions .asf, .wma, .wmv, and .mp3.) To find contents in the Windows Media Format for your SX66, please go to http://www.windowsmedia.com. To turn on Windows Media Player on your SX66, tap the Start menu > Programs > Windows Media.
SX66 User Manual Pictures can also be stored and transferred to your device from a MMC, SD, or any storage form factor supported by your digital camera. Insert a card into the memory card slot and then copy or drag the pictures from your PC to the My Documents directory on the memory card. (If the memory card does not have a My Documents directory you must create one first.) Transferring pictures Pictures stored on your PC can be synchronized with Pictures on your device.
SX66 User Manual 143 Sorting pictures: 1. Tap the Start menu > Programs > Pictures. 2. Tap to select a sorting option such as Name, Date, Size, and Type from the drop-down menu. Deleting an image Hold the stylus firmly on the file name of the picture you want to delete. Select Delete from the pop-up menu. Edit pictures You can rotate, crop, zoom and adjust the brightness and color contrast of your .jpg pictures. Tap the desired picture, then: n Tap to rotate a picture 90 degrees counter-clockwise.
SX66 User Manual Customizing pictures You can launch Pictures automatically when a digital camera storage card is inserted. You can also set the length of the time delay between slides for a slide show. To select launch automatically: 1. Tap the Start menu > Programs > Pictures. 2. Tap Tools > Options > the General tab. 3. Check the box next to Detect digital camera storage cards. To select the time delay between slides: 1. Tap the Start menu > Programs > Pictures. 2.
SX66 User Manual 145 Once your download is completed, the MIDlet Manager will automatically start and prompt you to install your new MIDlets/MIDlet suite. You must confirm that you want to proceed and the installation of your MIDlets/MIDlet suite is completed. Alternatively, you can cancel the installation at any time. Installing MIDlets from a PC You can install MIDlets/MIDlet suite onto your SX66 from your PC using the USB sync cable, the optional cradle, infrared or Bluetooth.
SX66 User Manual You can tap Show > Running to display the MIDlets/MIDlet suite currently running on your SX66. You can also return to a running MIDlet by selecting it from this screen. You can also tap the Show > Recent option to display up to the 9 most recently used MIDlets. Stopping MIDlets Some MIDlets have an exit or stop command within their menu structure, which are determined by the specific software developer.
SX66 User Manual 147 Changing the display name of your MIDlets You can change the displayed name of any MIDlet on your SX66. However, you cannot change the names of MIDlet suites. 1. Tap and hold the MIDlet you wish to change the name of and the then select Rename from the pop-up menu. 2. Enter the new name for your MIDlet in the dialogue box and press OK to confirm, or Cancel to abort. Un-installing MIDlets/MIDlet suites You can remove MIDlets/MIDlet suites from your SX66’s memory.
SX66 User Manual Network Type Tapping Menu > Choose Network Type enables you to choose your connection from the available list. MIDlet Security You can adjust security settings for each MIDlets/MIDlet suite by selecting a MIDlet and choosing Security. Note that some features may not be available for all MIDlets/MIDlet suites. Security Option Description Net Access Determines whether a MIDlets/MIDlet suite can access the Internet.
SX66 User Manual Invalid Java archive (jar) There is a problem with the installation file provided by the MIDlet manufacturer. This Java application is not compatible with this device One of more features required by this MIDlet is not available on your SX66.
SX66 User Manual
Chapter 10 Using Album
SX66 User Manual Using Album Album allows you to view image and video files, and play audio files. Four view modes are available: Thumbnail, Detailed, Slide Show, and Full Screen. To start Album: • Tap the Start menu > Programs > Album. Thumbnail view The first time you enter Album, the Thumbnail view mode will be invoked. By default, your \My Documents\My Pictures folder will be initially searched.
SX66 User Manual an image in an enlarged view, or to play a video or audio file, tap the desired thumbnail. To make an annotation on your file: The Annotate... command lets you add and remove text or audio annotation for a file. The particular text and audio recording can then be set to display or play during a slide show. In the Thumbnail view mode screen, tap on Edit and then select Annotate..., or select it from the pop-up menu.
SX66 User Manual To set audio files as Ringtones: Select the desired audio file, then select Set as Ringtone from the Tools Menu (or the menu that pops up when you tap and hold on a thumbnail). The previous ringtone will be immediately replaced. A message will display the filename and confirm that the operation was successful. Assign to Contact This command allows you to assign an image as a Photo ID to a Contact entry in your Pocket Contacts. 1. Choose the image you want to use as a Photo ID. 2.
SX66 User Manual 155 Options To change the Album settings, tap Options on the Tools menu. Three tabs are available: General, Association, and Slide Show. The General tab Function Explanation Default zoom The setting in the Default zoom field controls the size of the selected file when it is initially displayed in Detailed View. If set to Smart, Album will automatically calculate the best size in which to display the file on the screen.
SX66 User Manual The Association tab You can associate any or all of the supported file types with Album. When selecting a file of the associated type in the File Explorer, it will automatically open using Album. The Slide Show tab These settings control only the behavior of Slide Show view mode. These options are mostly self-explanatory, just choose the item you need and follow the relevant procedures for the way you want the Slide Show to work.
SX66 User Manual Images too big for the screen 1. Whenever the image is too large to be shown in the display area in its entirety, you can press your stylus anywhere in the display area and drag to interactively quick-pan the image to any desired position. 2. Alternatively, you can open the Quick View window, by tapping the Quick View icon on the Toolbar. The dotted outline within the Quick View window shows the currently displayed portion, in relation to the entire image.
SX66 User Manual Slide Show View When in the Thumbnail view or Detailed view, you can tap the icon in the Command Bar to enter Slide Show mode. In the Slide Show mode, all image, video, and audio files will automatically be displayed/played, after one another. If video and audio files are encountered during a Slide Show, they will be played once, and then the next file in the Slide Show will be displayed/played. However, you can play it over manually again using the Play button on the Toolbar.
SX66 User Manual 159 Full Screen View Mode You can enter the Full Screen View only from the Detailed View. In the Detailed View mode, simply tap the Full Screen icon on the Toolbar to switch to Full Screen. Tap to switch to Full Screen View mode. As with the Detailed View, if the image or video is currently displayed in a size that is too large to fit in its entirety on the screen, you can “pan” the desired portion into view by pressing and dragging your stylus on the screen.
Appendix A Maintaining your SX66 n Adding or Removing Programs n Managing Memory n Backing Up Files n Resetting your SX66
SX66 User Manual Adding or Removing Programs By default, programs added to your device at the factory are stored in the ROM (read only memory). You cannot remove these programs, and you will never accidentally lose them. You can install any other programs created for your device, as long as your device has enough memory. The most popular web site to find software for SX66 devices is http: //www.microsoft.com/mobile/pocketpc.
SX66 User Manual 163 To remove a program: Tap the Start menu > Settings > System > Remove Programs. You can only remove programs installed in storage memory. Programs that came with your device cannot be removed. You can quickly return your device to the factory default configuration by clearing all memory. All data, except the installed ROM application, will be lost. Managing Memory Memory on your SX66 is shared between the storage memory and the program memory.
SX66 User Manual Files stored in folders other than My Documents (or in folders under the sub-folders in My Documents) may not show up in the list view of some programs. When you use Notes, Pocket Word, or Pocket Excel, move files by opening the item and tapping Tools or Edit and then Rename/Move. Move E-mail attachments 1. Tap Messaging > Tools > Options. 2. On the Storage tab, select Store attachments on storage card, and then tap OK.
SX66 User Manual 165 Backing Up Files Because any new programs or data are stored in RAM, and therefore will be lost if your device loses power for any reason, it is critical that you back up the device's files to your PC or a memory card. You can back up files by synchronization while working on a PC. However, if you are unable to access your PC, you will need to back up files to a SD or MMC card. Your device enables you to back up individual files in Word or Excel. All files could be saved on a SD.
SX66 User Manual Resetting the SX66 You can perform a soft reset or a full reset. During a soft reset, the device is restarted and only some data in opened programs may be lost. However, a full reset turns the battery off, returns the device to its original factory settings, and deletes all programs, files, contacts and other information you have saved to the device.
Appendix B Regulatory Notices Regulatory Agency Identification n European Union Notice n FCC Compliance Statement n Important Health and Safety Information n Troubleshooting n
SX66 User Manual Regulatory Agency IDs For regulatory identification purposes your product is assigned a model number PH20Bx. The following accessories have been approved for use with your device. Their assigned model numbers listed below can identify these approved accessories. To ensure continued reliable and safe operation of your SX66, use only the accessories listed below with your PH20Bx.
SX66 User Manual FCC Compliance Statement n n n Consult the dealer or an experienced radio/ TV technician for help. n Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. n RF EXPOSURES FCC part 15, 22 and part 24 This device complies with Part 15 of the FCC Rules.
SX66 User Manual Important Health and Safety Information n Retain and follow all product safety and operating instructions. Observe all warnings in the operating instructions on the product. n To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment, observe the following precautions. General Precautions n n n n Heed service markings Except as explained elsewhere in the Operating n or Service documentation, do not service any product yourself.
SX66 User Manual n Handle battery packs carefully This product contains a Li-ion Polymer battery. There is a risk of fire and burns if the battery pack is handled improperly. Do not attempt to open or service the battery pack. Do not disassemble, crush, puncture, short external contacts or circuits, dispose of in fire or water, or expose a battery pack to temperatures higher than 60oC (140oF).
SX66 User Manual Troubleshooting If you still encounter problems after reviewing this troubleshooting guide, contact your mobile operator or an authorized Technical Support center in your area. Operating Problems Problem Solution n My SX66 keeps turning itself off. Your SX66 is designed by default to turn itself off if not used for 3 minutes. This period can be adjusted to a maximum of 5 minutes. Refer to the Power setting in Chapter 5 for more information. n My SX66 is not making any sound.
SX66 User Manual Problem n The screen is dark. Solution 1 2 n A Running out of memory warning message pops up on the screen. n The Battery low warning message pops up on the screen. n The screen is hard to read, or the text on the screen is too small for you. Check the Brightness setting by tapping the Start menu > Settings > the System tab > the Backlight > Brightness tab. Prolonged exposure to direct sunlight may also cause your SX66 screen to temporarily darken.
SX66 User Manual Tapping and Writing Problems Problem Solution n Device buttons do not respond, or bring up the wrong program. Check the Buttons setting to see if the program assignment for each function button is set as you wanted. Tap the Start menu > Settings > the Personal tab > Buttons. For detailed information about Button settings, see Chapter 5. n Inaccurate response to stylus taps. Adjust the touchscreen to respond more accurately to screen taps.
SX66 User Manual Problem n ActiveSync is connected, but data cannot be synchronized. Solution On your desktop computer, check the Tools Menu > Options > the Sync Options tab in the ActiveSync Manager window to see if the information type for the program you want has been selected for synchronizing. See more details about synchronizing information in Connection Problems Solution Problem n Unable to use Infrared (IR) port to transfer information.
SX66 User Manual Problem n Problems with the cable and cradle connection. Solution 1 2 3 4 Make sure that your SX66 is turned on. Make sure that you do not have any other active connections. Tap the Start menu > Today, and then tap or at the bottom of the screen, and then Disconnect. Make sure that the cable is securely plugged into the COM or USB ports on the back of your PC. Use the cable that came with the SX66 without any extra cables or extenders attached.
SX66 User Manual Specifications System Information Processor Intel PXA263 CPU at 400MHz Memory - ROM : 64 MB - RAM : 128 MB Controls and Lights Navigation Buttons 5-way navigation pad - 8 program buttons : Calendar,Contacts, Multimedia, Record, Start, Messaging, Internet Explorer, OK.
SX66 User Manual Index A Accessibility 108 Accessories 43 ActiveSync 79, 113 ActiveSync Errors 83 Active Connections 116 Adding programs 162 Address Book 132 Album 152 Annotation 153 APN 117 Appointment 121 Attachments 131 Authentication 102 Auto-configuration 126 B Background 85, 143 Backup 165 Battery 41 Beam 123 Beaming Information 83 Block recognizer 52 Bluetooth 105 Bluetooth Connection 111 Bluetooth Manager 110 Bluetooth Services 108 Bluetooth Settings 106 Business Card Exchange 111 Button Lock
SX66 User Manual My Shortcuts 116 My Work Network 95 R N Recording 57 Reminder 118, 123 Reset 166 Ringtone 92 Navigation bar 47 Navigation pad 62 Network 93 Network Adapters 103 Network Cards 102 Notes 126 Notifications 47 Notification LED 40 O Outlook E-mail 132 Owner Information 87 P Paired devices 111 Password 88 Permanent Save 91 Personal 85 Personal Area Network 115 Phone Dialer Screen 61 Phone Settings 92 Phone Volume 63 Pictures 141 PIN 62 Playlist 141 Pocket Excel 140 Pocket Word 139 POP3 42
