Cell Phone User Guide

Setup
77
SX1 K1 en, A31008-H6500-A1-4-7619 (8. January 2004, 12:27)
© Siemens AG 2001, I:\Mobil\SX1_v2\en_an_uebs_v2\k1gb_setup.fm
GPRS connection
(General Packet Radio Service)
With packet data technology which
connects only to send/receive data in
packets.
To configure this access point:
• Connection name: your choice
• Data bearer: GPRS
• Access point name: from provider
• User name: from provider
• Prompt password: choose Yes if you
want to key it in every logon
• Password: from provider if required
• Authentication: from provider
• Gateway IP address: from provider
Advanced Setup
If editing an access point:
OptionsKAdvanced settings
Your provider will supply you with
further information on this if
necessary.
• Phone IP address: from provider
• Primary name server: from provider
• Second. name server: from provider
• Use callback: data phone number
• Callback type: from provider
• Callback number: from provider
• Use PPP compression: from provider
• Use login script: from provider
• Login script: insert login script
• Modem initialisation: using AT modem
commands. From provider.
Access point options
Edit, New access point (Use default set-
tings, Use existing settings), Delete, Exit.
C KSetupKSettingsKConnection
KSelect a function:
GPRS
The setup data are needed for all ac-
cess points using GPRS.
GPRS connection
• When available Always use GPRS for
text/data communication (if the network
supports it)
• When needed Use only GPRS if an appli-
cation/action needs it to work
Access point
If you want to use your phone as a
modem to your computer, an access
point name is needed.
Data call
C KSetupKSettingsKConnection
KData call
The setup data are needed for all
access points using a (high speed)
data call.
Online time
The data call is switched off after a
time-out period.
• User defined: Key in a period in minutes
for time-out
• Unlimited: No time-out