User's Manual

Industry Automation and Drive Technologies - SCE
TIA Training Document
Page 15 of 47 Module
E12
Status: 01/2010 Vision Sensor Shape Check with SIMATIC S7-300F 2PN/DP and VS120
4.2 Configuring the Hardware
6. With a double click, open the configuration tool for the ’Hardware’. ( Hardware)
7. Open the hardware catalog by clicking on the symbol ' ’. ( )
Insert the ’Mounting Channel’ with a double click ( SIMATIC 300 RACK-300
Mounting Channel).
Note:
Then, a configuration table is displayed automatically for setting up Rack 0.