Install Instructions

Document No. 129-253
Installation Instructions
October 20, 2008
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and
models as design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective
owners. © 2008 Siemens Building Technologies, Inc.
Siemens Building Technologies, Inc.
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
U.S.A.
Your feedback is important to us. If you have comments about this
document, please send them to
[e-mail]
Document No. 129-253
Country of Origin: US
Page 4 of 4
Start-up
Check the wiring and the position indicator (Figure 10).
Position
Indicator
Output
Shaft
0
1
EA1158R1
0 Retracted
1 Extended
NOTE:
"0" and "1" markings are
intended for reference only,
and not stroke
measurement.
Figure 10. Position Indicator (Shown in 0 Position).
Troubleshooting
Check the wiring for the proper connections.
References
Technical Instructions Document No.
EA 599-15 Powermite 599 Series SSC
Electronic Valve Actuator 24 Vac
Proportional Control
155-313P25
EA 599-16 Powermite 599 Series SSC
Electronic Valve Actuator
3-position (Floating) Control
155-314P25
TB251, Powermite 599 Series, MT Series
Terminal Unit Valve and Actuator Assembly
Selection
155-306P25
Dimensions
2
(48)
4.4
(110.8)
3.5
(89.)
.85
(21.6)
4.5
(115.1)
5.5
(140.)
EA1159R1
0
1
Figure 11. SSC Actuator Dimensions in Inches (Millimeters).
Service Envelope
Minimum access space
recommended:
1. 8 inches (200 mm)
above the actuator.
2. 8 inches (200 mm)
beside the terminal
cover.