User Manual

Building Automation
HVAC Products
Materials [g]
Actuator
SSB819/1012
Total weight of device*
307
Plastics Polyamid PA
4
Polybutylene terephthalate PBT
20% GF
19
Polybutylene terephthalate PBT
30% GF
11
ABS-polycarbonate blend PC-ABS
52
Polyoxymethylene POM
8
Polyohenylene sulfide PPS
17
Polyvinyl chloride PVC
77
Polyetheretherketon PEEK
1
Metals Non alloyed copper Cu
35
Alloyed copper Cu-X
24
Non alloyed steel Fe-C
6
Low alloy steel Fe-C-X
1
High alloy steel Fe-Cr-Ni
7
Other materials Glue
1
External products
Motor, contains less than 3,5g Cu
and less than 0,004g Pb
26
Circuit boards with
components
Total weight/
FR4 board contains halogens
18/
10
*The total weight includes even substances under 0.1% of the total weight that are not declared separately.
Disposal
Do not dispose of the device as part of standard household garbage, but as
special waste from electrical and electronic components. This particularly applies
to electronic circuit boards.
Additionally, the law may mandate special treatment for specific components or
special treatment may be ecologically sensible.
Observe all local and applicable laws!
Environmental benefits:
The actuator reduces consumption of energy due to switch off in the end positions.
Legal disclaimer: This declaration is for information purposes only
This environmental product declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that
the product will retain a particular composition for a particular period.
Siemens Building Technologies Ltd. therefore does not assume liability for any error or for any consequences which may arise from the
use of this information to the maximum extent under the law.
If you require further information on environmental aspects and disposal, contact your local Siemens branch office.
Siemens Building Technologies CE1E4891enX1 2005-04-12 Page 2 of 2