Environmental Declaration

Building Automation
HVAC Products
Siemens Building Technologies CE1E4893en01 21/07/09 Page 5 of 5
Actuator
SSA81
.1 /00 UG
Total weight of device*
259 300 186 193
Plastics Polyetheretherketon PEEK
1 1 1 1
Polyamid PA
4
17
4 4
Polybutylene terephthalate PBT
20% GF
26 26 26 26
ABS-polycarbonate blend PC-ABS
52
65
52 52
Polyohenylene sulfide PPS 40%
GF
17 17 17 17
Polyoxymethylene POM
8
11
8 8
Polyvinyl chloride PVC
52
52 0 0
Metals Non alloyed copper Cu
21 21
0 0
Alloyed copper Cu-X
14 14 14 14
Non alloyed steel Fe-C
7
8
7 10
High alloy steel Fe-Cr-Ni
6
7
6 6
Other materials Glue
1
1
1 1
External
products
Motor, contains less than 3,5g Cu
26/
x
26/
x
26/
X
26/
X
Circuit boards
with components
Total weight/
FR4 board contains halogens
17/
10
23/
11
17/
10
17/
10
*The total weight includes even substances under 0.1% of the total weight that are not declared separately.
Disposal
Do not dispose of the device as part of standard household garbage, but as special waste
from electrical and electronic components. This particularly applies to electronic circuit
boards.
Additionally, the law may mandate special treatment for specific components or special
treatment may be ecologically sensible.
Observe all local and applicable laws!
Environmental benefits:
The actuator reduces consumption of energy due to switch off in the end positions.
Legal disclaimer: This declaration is for information purposes only
This environmental product declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that
the product will retain a particular composition for a particular period.
Siemens Building Technologies Ltd. therefore does not assume liability for any error or for any consequences which may arise from the
use of this information to the maximum extent under the law.
If you require further information on environmental aspects and disposal, contact your local Siemens branch office.