User Manual

Building Automation
HVAC Products
Siemens Building Technologies CE1E4860enX1 2009-09-10 Page 2 of 2
Materials [g]
Actuator
SSA31.04
Total weight of device*
266
Plastics Polyamid PA
4
Polybutylene terephthalate PBT
30% GF
56
ABS-polycarbonate blend PC-ABS
52
Polyoxymethylene POM
8
Polystyrene acrylnitrile PSAN
5
Polyphenylene sulfide PPS
17
Polyvinyl chloride PVC
42
Polyetheretherketon PEEK
1
Metals
32
7
Non alloyed copper Cu
Non alloyed steel Fe-C
Low alloyed steels Fe-C-X
36
Other materials Grease
1
External products Motor, contains less than 3,5g Cu
26
Circuit boards with
components
Total weight/
FR4 board contains halogens
27/
10
*The total weight includes even substances under 0.1% of the total weight that are not declared separately.
Disposal
Do not dispose of the device as part of standard household garbage, but as
special waste from electrical and electronic components. This particularly applies
to electronic circuit boards.
Additionally, the law may mandate special treatment for specific components or
special treatment may be ecologically sensible.
Observe all local and applicable laws!
Environmental benefits:
The actuator reduces consumption of energy due to switch off in the end positions.
Legal disclaimer: This declaration is for information purposes only
This environmental product declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that
the product will retain a particular composition for a particular period.
Siemens Building Technologies Ltd. therefore does not assume liability for any error or for any consequences which may arise from the
use of this information to the maximum extent under the law.
If you require further information on environmental aspects and disposal, contact your local Siemens branch office.