User Manual

8
Siemens
A6V11858278_en--_a
Smart Infrastructure
2020-07-30
WARNING
If operating voltage is switched on, press button (a) before and after adjusting the
position of the actuator stem. If you switched off operating voltage and control signal, you
can adjust the position directly without pressing button (a).
Maintenance
WARNING
Operating voltage must be switched off during any maintenance!
NOTICE
When carrying out service work on the plant, note the following:
Switch off operating voltage.
If necessary, disconnect electrical connections from the terminals.
The actuator must be commissioned only with a correctly mounted valve in place!
Disposal
The device is considered an electronic device for disposal in accordance
with the European Guidelines and may not be disposed of as domestic
garbage.
Dispose of the device through channels provided for this purpose.
Comply with all local and currently applicable laws and regulations.
Warranty