User Manual

5
Siemens
A6V11858278_en--_a
Smart Infrastructure
2020-07-30
Type
Detail
RDG..
RDG160KN, RDG160T, RDG405KN
RDU..
RDU340
RCU..
RCU50..
NOTICE
SSA151.05HF cannot be used in combination with the above thermostats as its control
signal of DC 4...20 mA is not supported by these thermostats.
Product documentation
Topic
Title
Document ID:
Mounting and installation
Mounting instructions
1)
A6V11858272
Standards and directives
CE declarations
A5W00106106A
RCM conformity
A5W00106107A
Environmental compatibility
Environmental declarations
A5W00109220A
Notes
Engineering
CAUTION
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
Observe national provisions and comply with the appropriate safety regulations.
Mounting
WARNING
Do not use pipe wrenches, spanners or similar tools.
Before mounting, fit the actuator in a position where the actuator stem is fully retracted
(see “Manual operation [ 7]”).
Avoid lateral pressure or (cable) tension on the mounted actuator!