Montageanleitung
2/2 2020-05-06 A6V11858272_----_a A5W00074459A_AA Siemens Smart Infrastructure
SSA
161.05
,
SSA151.05HF, SSA161.05HF, SSA161E.05HF only
de
Hubkalibration
en
Stroke calibration
Datenblatt/Datasheet:
http://www.siemens.com/download?A6V11858276 (SSA161.05)
http://www.siemens.com/download?A6V11858278 (SSA151.05HF, SSA161.05
HF, SSA161E.05HF)
de
Hinweis: 1) Keine manuelle Bedienung während der Selbstkalibrierung.
2)
Eine Selbstkalibrierung findet bei jedem Stellantriebsstart statt.
en
Note: 1) Don’t perform manual operation during self-calibration.
2)
Self
-
calibration runs each time the actuator powers on.
SSA151.05HF, SSA161.05HF, SSA161E.05HF only
de
Manuelle Bedienung (M
B
)
en
Manual operation (MO)
de Hinweis: Beim Einschalten des Stellantriebs
müssen alle Schritte ausgeführt werden. Die
Selbstberechnung
erfolgt danach.
en
Note:
You must perform all steps if the
actuator is powered on. Self-calculation runs
after
wards
.
LED status/LED-Zustand
SSA131.00, SSA331.00
SSA161.05
SSA151.05HF, SSA161.05HF,
SSA1
61E.05HF
Manual operation
Manuelle Bedienung
- - Blinking
i
green/red
Blinkt
i
grün/rot
Calibration/Kalibrierung
-
Quick blinking
ii
green/Schnelles Blinken
ii
grün
Actuator stem modulation/Stellantriebsstössel-Modulierung
Fully extends
Voll ausgefahren
Constant green (LED 1)
Konstant grün (LED 1)
-
Moving in-between
Bewegung zwischen den
Positionen
Constant green (LED 2)
Konstant grün (LED 2)
Blinking green while moving. Constant for 5 seconds once a set position
is reached. After that the LED turns off.
Blinkt grün bei Bewegung. Konstant während 5 Sek. sobald die Stellung
erreicht ist. Danach schaltet die LED aus.
Fully retracts
Voll eingefahren
Constant green (LED 3)
Konstant grün (LED
3
)
-
Error/Fehler - Constant red/Konstant rot
SSA131.00,
SSA331.00
SSA161.05
SSA151.05HF, SSA161.05
HF,
SSA
161E.05HF
A 62.4 62.4
B 26.2 26.2
C 81 83.4
D 51.4 51.4
i
0.5 s on, 0.5 s off
ii
0.1 s on, 0.1 s off
Issued by
Siemens Switzerland Ltd
Smart Infrastructure
Global Headquarters
Theilerstrasse 1a
CH-6300 Zug
Tel. +41 58 724 2424
www.siemens.com/buildingtechnologies
© Siemens Switzerland Ltd, 2020
Technical specifications and availability subject to change without notice.