Data Sheet for Product

3
Siemens
A6V11858280_en
--
_b
Smart Infrastructure
2021
-
08
-
06
HMI (Human-Machine Interface)
Overview
1 Protective cover for manual operation. Use a
screwdriver to open before manually adjusting the
actuator stem position.
2 Enable/disable button of manual operation
3 Hand adjustment with hex key for manual
operation
4 KNX programming button
5 Stem position LED indicator
6 KNX programming LED
Enable/disable button of manual operation
Activity Button operation Confirmation
Enter/exit local override
mode
Press button > 3 s. See Manual
operation [▶ 9] for details.
The actuator stem position
indicator flashes green and
red.
Manual operation button
Activity Button operation Confirmation
Move actuator stem up or
down
Rotate button clockwise or
anti-clockwise using a hex key.
See Manual operation [▶ 9] for
details.
The stem position indicator
flashes green. When a set
position is reached, the LED
is lit constantly for five
seconds and then turns off.
KNX programming button
Activity
KNX programming button op-
eration
Confirmation
Enter/exit addressing
mode
Press button < 2 s KNX programming LED turns
red or off
Reset to factory settings Press button > 20 s KNX programming LED
flashes yellow until device
restarts
PL-Link connection test Press button > 5 s and < 20 s KNX programming LED
flashes yellow once