Commissioning Instructions

5
Siemens
A6V12066162_en
--
_b
Smart Infrastructure
2021
-
08
-
06
Device/tool Type
Controllers and room units
RDG.. RDG100KN, RDG160KN, RDG165KN, RDG200KN,
RDG260KN
Engineering and commissioning tools (partially suitable for device configuration)
Tool for KNX S-Mode ETS5
The actuator works in PL-Link mode if the following controllers are connected:
Device/tool Type
Controllers
DXR2 DXR2.M18, DXR2.E18, DXR2.M09, DXR2.E09
PXC3 PXC3.E75A
Engineering and commissioning tools (partially suitable for device configuration)
Tool for PL-Link ABT Site 4.1.1 or higher
System network
Below is a sample topology for system network connection:
Fig. 1: KNX S-Mode network example
For KNX PL-Link topology, see the Desigo installation guide.
Parameters and objects in KNX S-Mode
Communication objects
No. Name in ETS Object
function
Flags Data point type KNX Range
C R W T U ID DPT_Name Format
1 Fault information Transmit 1 1 0 1 0 219.001 alarm info 6 bytes [0...255 ] = Log Nr.
[0...2] = Alarm priority
[0...14] = Application area
[0...4] = Error class
[0...7] = Attributes
[0...7] = Alarm state