Commissioning Instructions

16
Siemens
A6V12066162_en
--
_b
Smart Infrastructure
2021
-
08
-
06
KNX PL-Link commissioning
When the device is connected to KNX PL-Link bus, conduct manual commissioning as fol-
lows:
a) Connect ABT Site to the room automation station and activate the online commissioning
function.
b) Load Configuration page and select KNX PL-Link device.
c) Configure SSA118.09HKN in this page.
d) Download the configured project to room automation station. After download is complet-
ed, SSA118.09HKN restarts automatically.
Revision history
Edition Date Changes Section Pages
2 August 2021 ● Minor editorial changes
● Added information about
PL-Link
--- ---
1 January 2021 New document --- ---