User Manual

Building Automation
HVAC Products
SQS359
Materials [g]
Actuator
.00/189 .03/189 .04/189 .05/189
Total weight of device*
442 440 459 455
Plastics Polyethylene PE
2 2 2 2
Polyamid PA
18 18 18 18
ABS-polycarbonate blend PC-ABS
183 183 183 183
Acrylonitrile butadiene styrene ABS
6 6 6 6
Polyoxymethylene POM
39 39 39 43
Polyfenylenoxid PPO
34 34 34 34
Metals Alloyed copper Cu-X
9 9 9 9
Non alloyed steels Fe-C
43 43 43 43
High alloy steel Fe-Cr-Ni
5 5 5 5
Other materials Grease, oil
2 2
2 2
External
products
Motor, contains less than 20g Cu
and less than 0,4g Pb
66 66 75 73
Circuit boards
with components
Total weight/
CEM-1 board contains halogens
37/
14
34/
14
48/
14
34/
14
*The total weight includes even substances under 0.1% of the total weight that are not declared separately.
Disposal
Do not dispose of the device as part of standard household garbage, but as special waste
from electrical and electronic components. This particularly applies to electronic circuit
boards.
Additionally, the law may mandate special treatment for specific components or special
treatment may be ecologically sensible.
Observe all local and applicable laws!
Environmental benefits:
The actuator reduces consumption of energy due to switch off in the end positions.
Legal disclaimer: This declaration is for information purposes only
This environmental product declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that
the product will retain a particular composition for a particular period.
Siemens Building Technologies Ltd. therefore does not assume liability for any error or for any consequences which may arise from the
use of this information to the maximum extent under the law.
If you require further information on environmental aspects and disposal, contact your local Siemens branch office.
Siemens Building Technologies EPD 12/04/05 Page 2 of 2