Modem Router Quick Start Guide

7
Macintosh Conguration Procedures
Follow the procedure below for OSX:
1. Click Apple -> System Preferences.
2. Select the Network icon under the
Internet & Network section.
3. Select Built-in Ethernet from the
Show drop-down menu.
4. Select Using DHCP Server from the
Congure IPv4 drop-down menu.
5. Click Apply Now and exit out of
System Preferences window.
6. If you have a router, congure the
router using the Router Conguration
procedure that follows.
Follow the procedure below for OS9:
1. Click Apple -> Control Panels -> TCP/IP.
2. Select Ethernet from Connect via
drop-down menu.
3. Select Using DHCP Server from the
Congure drop-down menu.
4. Close window and save changes.
5. If you have a router, congure the
router using the Router Conguration
procedure that follows.
Router Conguration
1. Start your Web browser.
2. In the Address box, enter the following:
http://speedstream
3. When prompted for a username and
password, type admin for the password
only (username is not required).
4. Click Login and enter the username
and password provided by your
service provider.
5. Click Save.
6. If additional conguration is desired,
select Setup to congure DHCP, rewall
settings, security options, and also to
view status and statistical information.
Macintosh Configuration
In order to setup the SpeedStream
®
device, your computer must rst be congured to obtain
an IP address from a DHCP server.
Congratulations! You have
completed the installation of
your SpeedStream
®
device.
6
Troubleshooting
LED Off Green Blinking
Green
Red Blinking
Red/Green
Power - Power not
applied
Normal system
operation
N/A Self-test
failure if red
for more than
30 seconds
Flash write
in progress
Ethernet - Power not
applied
- Ethernet link
not connected
Ethernet link
connected
Ethernet trafc
owing in
either direction
N/A N/A
DSL - Power not
applied
- DSL signal
not detected
DSL line is
trained and
ready for
trafc
DSL is training N/A N/A
Internet - Power not
applied
- No connection
to Internet
Bridge: DSL
Link is up
Router: DSL
link is up +
WAN interface
is up + WAN
interface has
an IP address
N/A N/A N/A
Activity
- Power not
applied
- No LAN
data activity
N/A LAN user trafc
owing in
either direction
N/A N/A