Part # 007-4009-001 Quick-Start Guide SpeedStream® 4100 Modem PPPoE Modem Router
Step 1 > Install Line Filters Before you begin, Verify that the following items came with your DSL kit: Devices such as fax machines, caller ID boxes, or phones that share the same phone line as your DSL account require a line filter, which prevents noise from disrupting the DSL signal on the phone line. Filters can be in the form of a stand-alone line filter or a wall-mount filter.
Step 3 > PC Configuration Procedures Step 2 > Ethernet Installation Windows Configuration In order to setup the SpeedStream® device, your PC must first be configured to obtain an IP address from a DHCP server. Follow the procedure below: Install Ethernet Adapter You will need to install an Ethernet adapter if your computer does not already have one installed. Refer to your Ethernet adapter manufacturer’s documentation for complete installation instructions.
Macintosh Configuration Procedures Macintosh Configuration In order to setup the SpeedStream® device, your computer must first be configured to obtain an IP address from a DHCP server. Follow the procedure below for OSX: Follow the procedure below for OS9: 1. Click Apple -> System Preferences. 1. Click Apple -> Control Panels -> TCP/IP. 2. Select the Network icon under the Internet & Network section. 2. Select Ethernet from Connect via drop-down menu. 3.
Siemens Subscriber Networks, Inc. 4849 Alpha Road Dallas, TX 75244 (972) 852-1000 Fax (972) 852-1001 usa.800siemens@icn.siemens.com http://www.icn.siemens.com/subscriber Copyright© 2004 SIEMENS SUBSCRIBER NETWORKS, INC. All rights reserved. Siemens and the Siemens logo are trademarks of Siemens AG, Germany. All other trademarks are held by their respective companies. Siemens reserves the right to make changes to product specifications at any time without notice.
