Specifications

17
Special Application Panels Siemens Generator Ready Load Center is a UL listed 200 A, 30
circuit, 42 space indoor load center that provides an effective
solution for implementing generator backup of critical circuits.
Both main lug only and main breaker versions are available.
Main
Breaker
Automatic
Transfer Switch
Generator Backed Up
Critical Circuits
Non-critical
Circuits
Main Breaker
Load Center
Renovation panels are designed for renovation projects in older
homes in which the distance between studs is narrower than
current construction practices provide. Use of this narrower
panel eliminates the need to notch out existing studs.
Riser panels are intended for use in high-rise applications. The
interior in riser load centers is shifted to the left to allow extra
room for riser cables to pass through. Siemens main lug riser
panels are available with 125 or 200 amp ratings. Main breaker
conversion kits are available. The panels may be mounted with
main lugs on top or inverted to allow cables to pass on the
opposite side.
Spa panels are designed for outdoor applications requiring the
use of a ground fault circuit interrupter (GFCI). These panels
incorporate a 2-pole GFCI breaker and provide two extra circuits.
Temporary power outlet panels provide a variety of options
for UL listed power outlets suitable for use as temporary service
equipment during construction or as recreational vehicle power
supply panels.