Specifications

14
Engineer programming via the keypad
X-BUS
82
Siemens AB
A6V10276959
Security Products
18.11.2011
– USER CANCEL
– USER DELAY
– KEYSWITCH
– DELAY INTERVAL
– DELAY LIMIT
– DELAYED UNSET
– UNSET DURATION
– INTERLOCK
– DUAL PIN
 RF OUTPUT
DELETE
Select the area to be deleted.
See Adding / Editing an area [➙ 166] for further details on these options.
14.5 X-BUS
1. Scroll to XBUS and press SELECT.
2. Scroll to the desired programming options as shown below.
14.5.1 X-Bus addressing
Expanders, keypads and subsequent zones may be configured, located and
monitored, with the steps provided in this section. X-BUS settings such as type,
communication times and retries are also accessed within this menu.
The figure below shows each rotary switch with an arrow symbol pointing to a
number for identification (i.e. 3, 8). The right switch is the first unit digit and the left
switch is the 10s digit. The expander in the figure below is identified as 38.
1
2
3
4
7
5
0
9
8
6
1
2
3
4
7
5
0
9
8
6
1
Rotary switches